Amit BTG771AM-0T1 User manual

Quick Installation Guide
BTG771AM-0T1
Business Cellular Gateway
(with GSM/3G voice)
FW: 00KG0.1005
UM: V1.2_20140724

Business Cellular Gateway
BTG771 Quick Installation Guide 2
Chapter 1 Introduction
Congratulations on your purchase of this outstanding product: Business Cellular Gateway
with GSM/3G voice. This device is specifically designed for SMB mobile office. No matter
offices are located at wire unreachable area or on the move, it can connect to Intranet of
headquarter instantly. No bother to apply for expensive leased line in advance. Combing
with WiFi LAN access and NAT, it really becomes an on-the-move hotspot. With multiple
wireless WAN failover, it guarantees non-interrupt operation even no fixed line is available.
By Dynamic VPN and failover technology, it can establish a secure non-stop connection
with headquarter even IP is changing all the time. Built-in mobile application such as SMS
and USSD is convenient for management. Firewall protection is useful to avoid hackers
attacking. With embedded robust security and firewall function, it’s suitable for finance
networking requirement, like ATM and vending machine. Overall speaking, this business
cellular gateway is an integrated access device, and especially designed for mobile office,
mobile shop, temporary group, branch office, ATM, Kiosk, and different kinds of vending
machine.
Main Features:
 Mobile Broadband Gateway with Combo WAN Connection
 Support both mobile broadband and fixed-line broadband
 Built-in LTE module for high speed mobile network access
 Auto-failover between mobile broadband and fixed-line broadband connection
 Secure VPN broadband access
 Support VPN tunnels for IPSec, L2TP, PPTP and GRE connections
 Support VPN tunnel failover, full tunnel, setup wizard and up to 32 tunnels
capability
 Combined Tunneling: L2TP over IPSec and GRE over IPSec
 Support initiator and responder for IPSec, IPSec NAT-Traversal, Hub and
Spoke, and Dynamic VPN and Site to Site scenarios
 Support Client and Server roles for PPTP and L2TP VPN
 802.11n Compliance with MIMO Technology
 Max. physical data rate up to 300Mbps
 Backward compatible to IEEE 802.11b/g standards
 –Support WEP, WPA, WPA2, WPA-PSK, WPA2-PSK encryption
 SPI Firewall and Advanced Networking Function
 Support NAT firewall, protecting from DoS (Deny of Service) attacks
 Support Internet access control, like URL blocking, MAC filtering

Business Cellular Gateway
BTG771 Quick Installation Guide 3
 Support multiple sessions IPSec, L2TP and PPTP VPN pass-through
 Support QoS mechanism for efficiently prioritizing the various type of traffics
 Phone Calls via GSM/UMTS Network
 Support voice over GSM/UMTS circuit-switched network
 Logs for incoming calls, outgoing calls, and missed calls
 SMS (Short Message Service) Support
 New incoming SMS notification
 SMS compose, send, read, forward, reply, and delete
 Auto-alert when SMS storage is full
 Remote Management through SMS message
 Access control with key protection
 Internet link up/down auto alert
 Check Internet connection status
 Connect/disconnect/reconnect Internet connection
 Reboot router
 Easy Installation & Management
 Web-based UI management
 Backup/restore device settings, or reset setting to default
Before you install and use this product, please read this manual in detail for fully exploiting
the functions of this product.
1.1 Contents List
Items Description Contents Quantity
1 Business Cellular
Gateway
1pcs
2 Cellular Antenna
2pcs
3 WiFi Antenna
2pcs
4 Power Adapter 1pcs

Business Cellular Gateway
BTG771 Quick Installation Guide 4
5 RJ45 Cable 1pcs
6 CD 1pcs
1.2 Hardware Installation
1.2.1 WARNING
1.2.2 SYSTEM REQUIREMENTS
Network Requirements
 An Ethernet RJ-45 cable or DSL modem
 3G cellular service subscription
 IEEE 802.11n or 802.11b/ g wireless clients
 10/100 Ethernet adapter on PC
Web-based Configuration Utility
Requirements
Computer with the following:
 Windows®, Macintosh, or Linux-based
operating system
 Do not use the product in high humidity or high
temperatures.
 Only use the power adapter that comes with the
package. Using a different voltage rating power
adaptor is dangerous and may damage the product.
 Do not open or repair the case yourself. If the
product is too hot, turn off the power immediately
and have it repaired at a qualified service center.
 Place the product on a stable surface and avoid
using this product and all accessories outdoors.
Attention

Business Cellular Gateway
BTG771 Quick Installation Guide 5
 An installed Ethernet adapter
Browser Requirements:
 Internet Explorer 6.0 or higher
 Chrome 2.0 or higher
 Firefox 3.0 or higher
 Safari 3.0 or higher
CD Installation Wizard
Requirements
Computer with the following:
 Windows® 7, Vista®, or XP with Service
Pack 2
 An installed Ethernet adapter
 CD-ROM drive
1.2.3 Hardware Configuration
Rear View:
BTG771-0T1
Auto MDI/MDIX RJ-45 Ports
1x GE WAN to connect Internet,
4x GE LAN to connect local
WiFi
Antenna
Receptor
for Power
A
dapter
USIM/SIM
Slot
Power
ON/OFF
Switch
WiFi
Antenna
RJ11 Port
to connect
phone

Business Cellular Gateway
BTG771 Quick Installation Guide 6
Front View:
BTG771-0T1
1.2.4 LED Indication
BTG771-0T1
LED LED Icon
Description
Status
Flash per second: System is powered on, and working
normally
Green and steady on: A problem occurred with system
operation
OFF: System is powered off, or a problem occurred with
system operation
3G/4G Signal
Strength
OFF: No 3G/4G signal, or not in 3G/4G mode
Red and steady on: Connected. Signal strength is in weak
level
Red in fast flash: Roaming alert, and 3G/4G signal strength
is in weak level
Amber and steady on: Connected. Signal strength is in
middle level
Amber in fast flash: Roaming alert, and 3G/4G signal
strength is in middle level
Green and steady on: Connected. Signal strength is in
strong level
Green in fast flash: roaming alert, and 3G/4G signal
strength is in strong level
Reset Button 3G/ 4G Antenna 3G/ 4G Antenna

Business Cellular Gateway
BTG771 Quick Installation Guide 7
WAN
OFF: No Ethernet cable attached
Green: Ethernet connection is established
Green in flash: Data packet are transferred via Ethernet
LAN1 ~ LAN4
OFF: No Ethernet cable attached or device is not linked
Green: Ethernet connection is established
Green in flash: Data packet are transferred via Ethernet
WiFi
OFF: Wireless Radio is disabled
Green and steady on: Wireless Radio is enabled
Green in flash: Data packet are transferred
2G/3G
Green and steady on: 2G/3G connection is established
4G Green and steady on: 4G connection is established
SMS
Green and steady on: SMS storage is full in SIM card
Green and flash: With unread or new coming messages
OFF: No unread or new coming message

Business Cellular Gateway
BTG771 Quick Installation Guide 8
Chapter 2 Getting Started
2.1 Connect Your Device
Before you can use this product, you need to connect your PC or device to this gateway
first. You can connect your PC to one of LAN1~LAN4 ports through an Ethernet cable.
Otherwise, your device can also connect to it through WiFi. The default SSID of this
gateway is “default”, and without encryption by default. Your PC or device will get a IP
address automatically after connecting to this gateway.
2.2 Easy Setup by Configuring Web UI
You can browse Web UI to configure the device. Firstly you need to launch the Setup
Wizard browser first and then the Setup Wizard will guide you step-by-step to finish the
basic setup process.
Browse to Activate the Setup Wizard
Type in the IP Address (http://192.168.123.254)1
When you see the login page, type the password ‘admin’ 2 and then click ‘login’ button.
After login, select your language from the list.
1 The default LAN IP address of this gateway is 192.168.123.254. If you change it, you need to type the
new IP address
2 It’s strongly recommending you to change this login password from default value

Business Cellular Gateway
BTG771 Quick Installation Guide 9
2.2.1 Wizard
Select “Wizard” for basic network settings and VPN settings in a simple way. Or, you can
go to Basic Network / Advanced Network / Applications / System to setup the
configuration by your own selection.
A. Configure with the Network Setup Wizard
Step 1
The network setup wizard will guide you to
finish some basic settings, including login
password, time zone, WAN interface,
Ethernet LAN interface and WiFi LAN
interface.
Press “Next” to start the wizard.
Step 2: Change Password
Password Configuration: You can change
the login password of Web UI here. It’s
strongly recommending you to change this
login password from default value.
Press “Next” to continue.

Business Cellular Gateway
BTG771 Quick Installation Guide 10
Step 3: Time Zone
Time Zone Configuration: It will detect
your time zone automatically. If the result
of auto detection is not correct, you can
press “Detect Again” button or select
manually.
Press “Next” to continue.
Step 4: WAN
WAN Interface Configuration: Choose
type of WAN connection. You can select
Ethernet WAN if you want to connect to
Internet through fixed line. Or select
3G/4G if you want to connect to Internet
through 3G/4G network. A variety of WAN
types are available for Ethernet WAN connection.
Press “Next” to continue.
Step 4-1: Ethernet (Static IP Address)
If choosing Ethernet->Static IP Address,
you need to input all IP address that you
get from ISP (Internet Service Provider)
manually. This option is usually chosen
when you get a fixed IP address from ISP.
Press “Next” to continue.
Step 4-2: Ethernet (Dynamic IP Address)
If choosing Ethernet->Dynamic IP
Address, you can input host name or
registered MAC address when your ISP
requests it. In most cases, you can leave
them as blank and go next. This option is
usually chosen when you get a dynamic
IP address from ISP.
Press “Next” to continue.

Business Cellular Gateway
BTG771 Quick Installation Guide 11
Step 4-3: Ethernet (PPPoE)
If choosing Ethernet->PPP over Ethernet
(so-called PPPoE), you need to input
account and password that you get from
ISP. For other fields, you can leave them
as blank in most cases. This option is
usually chosen when you use ADSL for
WAN connection.
Press “Next” to continue.
Step 4-4: Ethernet (PPTP)
If choosing Ethernet->PPTP, you need to
input required dial-up information that you
get from ISP. This option is usually chosen
when your ISP requests it.
Press “Next” to continue.
Step 4-5: Ethernet (L2TP)
If choosing Ethernet->L2TP, you need to
input required dial-up information that you
get from ISP. This option is usually chosen
when your ISP requests it.
Press “Next” to continue.
Step 4-6: 3G/4G
If choosing 3G/4G->3G/4G, please make
sure you have inserted SIM card. If not,
please power off this gateway, and insert
SIM card first. Then you can select
“Auto-Detection” to finish dial-up profile
automatically. This option is chosen when
you want to connect to Internet through 3G/4G network instead of fixed line broadband.
Press “Next” to continue.

Business Cellular Gateway
BTG771 Quick Installation Guide 12
Step 5: Ethernet LAN
LAN Interface Configuration: Change the
LAN IP address and subnet mask of this
gateway. You can keep the default setting
and go to next step.
Press “Next” to continue.
Step 6: WiFi LAN
WiFi LAN Interface Configuration: Change
the SSID, Channel Number,
Authentication and Encryption Algorithm
for first virtual AP of this gateway. You can
keep the default setting and go to next
step.
Press “Next” to continue.
Step 7: Confirm and Apply
Check the new settings again. If all
information is correct, please press “Apply”
button to save new settings. Then it will
take 65 seconds to restart this gateway
and take new settings effective.
Step 8: Counting Down
Configuration is completed. Press “Finish”
button to close Setup Wizard and browser
counts down for 65 seconds and provides
you with “Click here” button to reconnect to
the device.
B. Configure with the VPN Setup Wizard

Business Cellular Gateway
BTG771 Quick Installation Guide 13
Step 1
The VPN setup wizard will guide you to
finish profiles of IPSec, PPTP, and L2TP
VPN connection quickly.
Press “Next” to start the wizard.
Step 2: VPN Type
Select type of VPN connection you want
to create. Here you can choose IPSec,
PPTP, or L2TP.
Press “Next” to continue.
Step 2-1: IPSec
If choosing IPSec, there are two options
of tunnel scenario can be chosen. “Site to
Site” is for two offices to create VPN
tunnel. “Dynamic VPN” is for remote
users to connect to office. For other
options, please go to Advanced
Network->VPN to setup. Input the
required network information and
pre-shared key for VPN connection.
For Dynamic VPN, you don’t need to
input network information of remote
subnet and remote gateway.
Press “Next” to continue.

Business Cellular Gateway
BTG771 Quick Installation Guide 14
Step 2-2: PPTP
If choosing PPTP, there are two options
of mode can be chosen. Choose “Client”
if you want this device to connect to
another PPTP server. Or choose “Server”
if you want other PPTP clients to connect
to it.
Press “Next” to continue.
If choosing PPTP Client, please input
tunnel name, IP/FQDN of PPTP server,
username/password, authentication, and
MPPE options. Please make sure these
settings are accepted by PPTP server.
Otherwise, remote PPTP server will
reject the connection.
Press “Next” to continue.
If choosing PPTP Server, please select
options of authentication and MPPE. You
also need to create a set of username
and password for PPTP clients. In this
wizard, you can only create one user
account. If you want to create more user
accounts, please go to Advanced
Network->VPN-> PPTP to add more
users.
Press “Next” to continue.

Business Cellular Gateway
BTG771 Quick Installation Guide 15
Step 2-3: L2TP
If choosing L2TP, there are two options
of mode can be chosen. Choose “Client”
if you want this device to connect to
another L2TP server. Or choose “Server”
if you want other L2TP clients to connect
to it.
Press “Next” to continue.
If choosing L2TP Client, please input
tunnel name, IP/FQDN of L2TP server,
username/password, authentication, and
MPPE options. Please make sure these
settings are accepted by L2TP server.
Otherwise, remote L2TP server will reject
the connection.
Press “Next” to continue.
If choosing L2TP Server, please select
options of authentication and MPPE. You
also need to create a set of username
and password for L2TP clients. In this
wizard, you can only create one user
account. If you want to create more user
accounts, please go to Advanced
Network->VPN-> L2TP to add more
users.
Press “Next” to continue.

Business Cellular Gateway
BTG771 Quick Installation Guide 16
Step 3: Confirm and Apply
Confirm new settings. If all new settings
are correct, please press “Apply” button
to save these new settings and take them
effective.