AMP Lighting AHS-7006-X-B-BZ Series Operating and safety instructions

INSTALLATION & MAINTENANCE GUIDE
Help Hotline:
1-813-978-3900 • Mon-Fri 9am-6pm (EST)
www.amplighting.com
AMP®Low Voltage Landscape Lighting
AMP® TorrentPro Rotatable Hardscape
AHS-7006-X-B-BZ

AMP®TorrentPro Rotatable Hardscape
AHS-7006-X-B-BZ
INSTALLATION & MAINTENANCE GUIDE
www.amplighting.com
–2–
Important Safety Instructions: Read Before Installation
!
This luminaire is intended for installation in accordance with local codes
and the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.
These instructions do not intend to cover all variations in installation,
operation maintenance or mounting situations.
1. Make sure the power is turned OFF before installing or servicing this
luminaire.
2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)
or more from pool, spa or fountain.
3. This luminaire is intended to be used only with a power supply
(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.
4. Wiring connections must be made with UL listed wire connectors that are
suitable for outdoor use.
5. Position the low voltage wire and wire connector so that it is located
within 6 inches (15.2 cm) from a building structure, a luminaire or
tting.
6. The main low voltage cable is intended for shallow burial - less than 6
inches (152 mm).
7. If additional lengths of low voltage cable are required, please contact
www.amplighting.com or call 1-813-978-3900.
Important Safety Instructions
!
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
Lighted lamp is HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Turn off/unplug and allow to cool before replacing lamp.
2. Lamp gets HOT quickly! Contact only switch/plug when turning on.
3. Do not touch the hot lens, guard or enclosure.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may
damage lamp.
6. Do not operate the luminaire tting with a missing or damaged shield.
SAVE THESE INSTRUCTIONS

[email protected] • 813.978.3900
Product Dimensions
–3–
1
Package Contents
Remove Lens
A. (1) Fixture Body
8”
1.5”
3.35”
Remove the lens from the
luminaire by loosening the lock
screws.
Lens
Lock Screw
Luminaire

INSTALLATION & MAINTENANCE GUIDE
–4–
www.amplighting.com
–4–
3
2
AMP®TorrentPro Rotatable Hardscape
AHS-7006-X-B-BZ
Install Lamp
Install Lens
Insert lamp with the correct
wattage and type marked on
the xture label and push rmly
into place.
CAUTION: Do not exceed
maximum wattage marked on
luminaire label.
Socket
Lamp
Install the lens back onto the
luminaire and tighten with
previously removed lock screws.
Lens
Lock Screw
Luminaire

[email protected] • 813.978.3900
–5–
INSTALLATION & MAINTENANCE GUIDE
4
5
AMP®TorrentPro Rotatable Hardscape
AHS-7006-X-B-BZ
Install Fixture to Mounting Surface
Wire Connection
Place the xture body onto the
desired location. Mark four points
on the mounting surface using the
holes of the mount as a guide.
Set the xture aside and drill the
proper holes where you placed the
marks then insert the wall anchors
into the drilled holes.
Place the xture onto the surface
and secure with screws using a
screwdriver.
Fixture Body
Wall Anchor
Screw
Strip both leads from the luminaire pigtail. Using two wire
connectors (sold separately), connect the leads from the luminaire
to the main supply cable leads.
Wire Connectors
Luminaire Wires
Main Supply Cable

INSTALLATION & MAINTENANCE GUIDE
–6–
www.amplighting.com
–6–
6
Product Dimensions
AMP®TorrentPro Rotatable Hardscape
AHS-7006-X-B-BZ
Adjust Luminaire Direction
Rotate
Using an Allen Key, loosen the
set screws on the side of the
xture to rotate the luminaire to
your desired direction by hand.
Once you have the desired angle,
tighten down the set screws with
the Allen Key.
Luminaire
Set Screw
Set Screw
Remove the lens to expose the lamp and replace it with the correct
wattage and type marked on the xture label. Then, reinstall the lens.
IMPORTANT: Lamps must be protected from moisture and dust at all
times. Always reinstall the lens when removed.

–6––6–
[email protected] • 813.978.3900
–7–

IS-AHS-7006-X-B-BZ-ver1.pdf
Specications and product details subject to change without notice.
© Copyright 2019, AMP®Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • 813.978.3900
Help Hotline:
1-813-978-3900 • Mon-Fri 9am-6pm (EST)
www.amplighting.com