Amroad DP3210 User manual

AMROAD DP3210
DOOR STATION
~
Technical Manual

AMROAD DP3210
Contents
Contents.......................................... i
Preface.............................................1
Front Panel ..................................... 2
Status Indicator .............................. 3
Functions Performed by the IP-PBX 4
Simultaneous Ring ................................... 4
Call Forwarding ........................................ 4
E-Mail/Voicemail Notification................. 4
WEB UI............................................ 5
Search Tool............................................... 5
WEB UI login............................................. 5
Outline of WEB UI Settings ............. 6
System............................................ 7
Basic Settings ............................................7
Network Setting ....................................... 8
Login Name............................................... 9
Reboot ...................................................... 9
Streaming Settings ....................... 10
Video ........................................................10
Audio........................................................ 12
SIP Settings....................................13
Entrance Settings...........................15
Extensions ...............................................16
Upgrade .........................................18
Update .....................................................18
Configurations......................................... 19
APS.......................................................... 20
Regulations and Safety Precaution 21
FCC Statement ........................................ 21
FCC Radiation Exposure Statement ....... 21
EC Directive Compliance Statement...... 21
Contents
i

AMROAD DP3210
Preface
Welcome
Thank you for choosing this Video Door Phone.
This device is designed to work with IP Video
Phone and other SIP devices to compose a SIP
based door entry system.
Besides taking advantages of IP technologies,
this system also can fully utilize the SIP
protocol to link to your SIP devices. It will work
with most IP PBX systems supporting audio and
video, and it can be set via a web interface.
Certificates, Certify your safety
AMROAD full range products passed European
CE, USA FCC, BSMI/NCC Taiwan. All these
certificates promise tenants a harmless
modern living environment.
No electronic devises will be interfered with
this product.
Main Features
Talk to visitors with real time video and
voice on IP Video Phone or Video Indoor
Station.
SIP 2.0 (RFC3261) Compliant.
Support H.263 video format.
Support G.711 audio formats.
Support Peer-to-Peer Mode.
Build-in wide angle lens and white LED
light-compensator.
Build-in speaker and microphone.
Water and dust resistance capabilities
(IP55).
Web user interface for configuration and
management.
NOTICE
The default of this device is DHCP. If you need
to set Static IP, please reference Reset Button in
Installation Manual.
The device will be switched to the static IP
mode and reboot itself when the user has
pressed the reset button for 3 seconds. IP is
"192.168.0.50".
Preface
Introduction
1

AMROAD DP3210
Front Panel
Front Panel
Doorbell
3-Color LED Indicator
Microphone
Speaker
White Light LEDs
Lens Module
2

AMROAD DP3210
Status Indicator
Status Indicator
Status LED
Green LED Red LED Blue LED
Door Bell
Button
(Green LED)
Description
OFF ON for 1 second OFF ON for 1 second
Boot is initiated.
WL LED is also On for 1 second.
Blinking (3-sec
On, one-sec
Off)
OFF OFF OFF Boot procedure 1st stage, OS
Initial.
OFF ON OFF ON
Boot procedure 2nd stage, AP
Ready.
ON OFF OFF OFF
Boot is completed, and the device
works normally. (SIP Mode- DHCP,
Static IP, and PPPoE connection
mode).
ON OFF OFF ON
When Door Bell is pressed, or
it’s at night (SIP Mode).
OFF OFF ON OFF
Boot is completed. Device works
normally. (Peer-to-Peer Mode).
OFF OFF ON ON Door Bell is pressed, or it’s at
night (Peer-to-peer Mode).
Blinking
(GreenBlue
Red each
one-sec On)
Blinking
(GreenBlue
Red each one-sec
On)
Blinking
(GreenBlue
Red each
one-sec On)
OFF Firmware Upgrade
OFF OFF
On 3 seconds
Once OFF
Reset! Device becomes Static IP
mode.
OFF OFF
Blinking (3-sec
On, one-sec
Off)
OFF SIP is NOT registered.
OFF
Blinking (3-sec Off,
one-sec On) OFF OFF Network is Disconnected.
OFF
Blinking (One-sec
On 3-sec Off)
OFF OFF
Network is connected, but the
device fails to obtain IP address
3

AMROAD DP3210
Functions Performed by the IP-PBX
Simultaneous Ring
The Distribution Policy is set to Ring All. e.g.
When a visitor calls the group call (say
extension 500), group members (say
extensions 155, 157, and 166) will all ring
simultaneously.
Call Forwarding
Enter a number to which incoming calls are
forwarded when unanswered. The number
could be an extension or a PSTN number with
appropriate outbound prefix.
E-Mail/Voicemail Notification
IP PBX has a built-in voice mail subsystem with
a sophisticated IVR menu. A call to an
extension unanswered could be configured to
enter voice mail recording procedure. After
leaving a message, a notification e-mail will be
sent to the user owns the extension with or
without the message in the form of an
attached WAV file.
Functions Performed by the IP-PBX
(
Compatible with AMROAD IP-PBX)
4

AMROAD DP3210
WEB UI
Search Tool
The default connection setting type of this
product is “DHCP Client”, it is a typical network
mode.
You can use AMROAD Configurator that we
supplied. This software utility provided by your
local distributor or local dealer which is able to
help you to find your Door Station when using
dynamic IP address.
When this application starts, Search Tool will
search all the AMROAD products automatically
in the same network. Choose the device which
you want to set, click on the right, and
Login Page will show.
WEB UI login
In addition to search the device by Search Tool,
you can input IP on browser, and Login Page
(WEB UI) will show as below.
WEB UI has protected by Login ID and Password.
Input correct ID and password, click “Login”
bottom and get into WEB UI. The detail setting
information will describe next page. Default ID
and password are “admin”.
NOTICE：
1. While configuring WEB UI (User Interface),
please do not operate this product so as
to prevent this product being out of order.
2. Do not input special symbols “, \, and & in
the fields on the WEB UI. Otherwise, you
may fail to save your setting normally.
3. After configuring some Web pages and
pressing “SAVE” button, you need to wait
a little longer for system to save the
configuration.
WEB UI
5

AMROAD DP3210
Outline of WEB UI Settings
System
Basic Setting
Network Setting
Login Name
Reboot
Streaming Settings
Video
Audio
SIP settings
Authentication
SIP Proxy
SIP Registrar Server
Entrance Settings
Extensions
Upgrade
Upgrade
Configurations
APS
Outline of WEB UI Settings
6

AMROAD DP3210
System
Basic Settings
Device ID：Device ID that assigned by
manufacturer.
Date and Time：Here shows date and time
set on this video door phone.
Set New Date and Time：These fields
allow user to set correct date and time
according to the local–standard. You may
synchronize phone time to match your PC
by pressing “Sync with PC” button.
Time Zone：This field allows you to select
your time zone to fit your location. You
can enable the Daylight-Saving feature if
needed.
Daylight Saving Time is a way of getting more
light out of the day by advancing clocks by one
hour during the summer.
Network Time Protocol：Enable NTP
Calibration service to allow the system to
calibrate the time with NTP server
through Internet.
NTP Server Address：You may use your
preferred NTP server by input new address
here.
Auxiliary Light：Enable or disable the
button LED light. Set Start Time and End
time for the button LED Light if “Enable”
is selected.
Save：Click save your setting.
System
7