Amroad AMROAD P3 User manual

AMROAD P3
DOOR STATION
~
Technical Manual

AMROAD P3
i
Contents
Contents.............................................i
Regulations and Safety Precautions... 1
FCC Statement ..............................................1
FCC Radiation Exposure Statement .............1
EC Directive Compliance Statement ............1
LOGIN ................................................ 2
FUNCTION BAR.................................. 3
LOGOUT.............................................4
Idle ................................................................4
LOGOUT Before Saved .................................4
REBOOT ............................................. 5
REBOOT Before Saved.................................. 5
TOOLS................................................6
Import Settings ............................................6
Export Current Settings ...............................6
APS Settings .................................................6
Update Firmware.......................................... 6
Restore to Factory Defaults......................... 6
GENERAL ........................................... 7
Device Overview ........................................... 7
GENERAL – Essential Step..................8
Network Settings .........................................8
Network Settings – Static IP ........................9
SIP Settings ................................................. 10
Streaming Settings......................................12
Device Connection Settings........................13
GENERAL – User Preferences ............15
Basic Preference ..........................................15
Device Volume.............................................17
Camera Setting ...........................................18
Extension Setting ....................................... 20
GPIO Settings ..............................................22
RFID Setting.................................................23
Information of adding cards...................... 24
IO Application ................................. 25
Electric Bolt .................................................25
Electric Strike ............................................. 26
PIR Motion Sensor and Light.......................27
Technical Detail ............................... 28
Contents

AMROAD P3
1
Regulations and Safety Precautions
FCC Statement
This product has been tested for compliance
with FCC Regulations Part 15, Specifications of
Class B Digital Devices. These limitations
provide reasonable protection against harmful
EMI caused by residential installations. This
product may generate and radiate energy in the
radio frequency; harmful interference to radio
communication may occur if not installed or
used in accordance with safety regulations.
However, this does not assure that specific
installation will not cause interference; in case
of interferences to the radio or TV reception in
the residence while this product is switched on
or off, the user may try the following
adjustment methods to improve the EMI
situation:
Adjust direction and location of the
antenna
Increase distance between the receiving
antenna and this product.
Do not use the product on the same
power socket used by the receiving
antenna.
FCC Radiation Exposure Statement
This product is in compliance with FCC’s
Radiation Exposure Limitations for
uncontrolled environment. While installing and
operating this product, the radiation
transmitter must be kept away from human
body at distance of at least 20cm.
EC Directive Compliance Statement
Manufacturer claims that this product
complies with basic requirements specified in
statutory regulations in relation to health,
safety and environmental protection. The
following regulations are set forth based on
European R&TTE - European Radio equipment
and Telecommunications Terminal Equipment –
1999/5/EC.
EN 301 489-1, 301 489-17, addressing EMC
requirements of general radio frequency
devices
EN 609 50 Safety EN 609 50 Safety
Specifications
EN 300-328-1, EN 300-328-2, addressing
technical requirements of radio frequency
devices.
NOTE：
This device is applicable in member countries of
EU and EFTA. Outdoor operation is limited to
specific radio frequencies or requirements only.
Please consult local authorities for application
procedures.
It is deemed not in conformity with the above
specification, and the product is not allowed to
be used in the EU Community or European
country where R&TTE directive 1999/5/EC is in
force, if the intensity of the overall radiated
power and/or antenna exceeds 100 mW EIRP
(Equivalent Isotropic Radiated Power).
Regulations and
Safety Precautions

AMROAD P3
2
LOGIN
SI can set all kinds of function by using
AMROAD P3 WEB.
Input the IP address of this product on your
browser, then you will see home page of the
AMROAD P3 appearing. Web UI is protected by
Login ID and Password. Please key in the correct
ID and password, and then click “Login” button
to enter Web UI. The default ID and password
both are “admin”.
Recommend to use browser with Google
Chrome.
LOGIN

AMROAD P3
3
FUNCTION BAR
On the left side of the upper corner, the
content inside are “ACCOUNT SETTINGS”
and “LOGOUT”.
You can set language of the Webserver and the
account detail in “ACCOUNT SETTINGS”, as
shown below.
There are three bottoms on the right side of
the upper corner, and they are “SAVE”,
“DISCARD”, and “REBOOT”.
You click “SAVE” definitely after modify
anything on the WEB. It will be done indeed. If
Changes have not been saved, it will show on
the top to remind you.
“DISCARD」is discard the change you set after
you saved last time.
“REBOOT” is restart AMROAD P3 device.
FUNCTION BAR

AMROAD P3
4
LOGOUT
On the left side of the upper corner, you can
find “LOGOUT” inside .
Idle
If WEB lays idle for 3 minutes, it will show as
below.
After 6 minutes, WEB would LOGOUT and
saved automatically but not applied.
LOGOUT Before Saved
If you don’t save the change before LOGOUT,
WEB will show as below.
There are 3 options can choose, “SAVE &
LOGOUT”, “DISCARD & LOGOUT” and
“CANCEL”.
LOGOUT

AMROAD P3
5
REBOOT
REBOOT Before Saved
If you don’t save the change before REBOOT,
WEB will show as below.
There are 3 options can choose, “SAVE &
REBOOT”, “DISCARD & REBOOT” and
“CANCEL”.
REBOOT

AMROAD P3
6
TOOLS
Import Settings
Import the setting file.
Export Current Settings
Choose the specific functions you need to
export the setting file.
APS Settings
Engineering mode.
Update Firmware
Import the new firmware and DO NOT turn off
or disconnect the Ethernet cable during
upgrade, for it may cause serious damage to
this device.
Restore to Factory Defaults
If you push the RESTORE bottom, it will delete
all current settings and restore to factory
defaults.
TOOLS

AMROAD P3
7
GENERAL
Device Overview
This page shows the device information setting.
Summary
Product NO
Serial Number
Hardware Version
MAC Address
Firmware Version
Current Device Language
Live Status
IP Type
IP Address
SIP Mode
SIP Status
Available/Total Memory
GENERAL
Device Overview