Analog Devices ADSP-BF53x EZ-Extender 1 User manual

ADSP-BF53x EZ-Extender 1
Manual
Revision 1.0, July 2003
Part Number
82-000735-01
Analog Devices, Inc.
One Technology Way
Norwood, Mass. 02062-9106 a

Copyright Information
© 2003 Analog Devices, Inc., ALL RIGHTS RESERVED. This docu-
ment may not be reproduced in any form without prior, express written
consent from Analog Devices, Inc.
Printed in the USA.
Limited Warranty
The ADSP-BF53x EZ-Extender 1 is warranted against defects in materials
and workmanship for a period of one year from the date of purchase from
Analog Devices or from an authorized dealer.
Disclaimer
Analog Devices, Inc. reserves the right to change this product without
prior notice. Information furnished by Analog Devices is believed to be
accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use; nor for any infringement of patents or other rights of
third parties which may result from its use. No license is granted by impli-
cation or otherwise under the patent rights of Analog Devices, Inc.
Trademark and Service Mark Notice
The Analog Devices logo, Blackfin, and EZ-KIT Lite are registered trade-
marks of Analog Devices, Inc.
VisualDSP++ is a trademark of Analog Devices, Inc.
All other brand and product names are trademarks or service marks of
their respective owners.

ADSP-BF53x EZ-Extender 1 Manual iii
CONTENTS
PREFACE
Purpose of This Manual .................................................................. vi
Intended Audience .......................................................................... vi
Manual Contents ........................................................................... vii
What’s New in This Manual ........................................................... vii
Technical or Customer Support ..................................................... viii
Supported Products ....................................................................... viii
Embedded Processor Product Information .................................. ix
Product Related Documents ...................................................... ix
Notation Conventions ...................................................................... x
USING EZ-EXTENDER
Overview ...................................................................................... 1-1
Connecting EZ-Extender .............................................................. 1-2
HSC Boards ............................................................................ 1-2
OmniVision Camera ............................................................... 1-3
LCD Interface ......................................................................... 1-3
EZ-EXTENDER HARDWARE REFERENCE
System Architecture ...................................................................... 2-2

CONTENTS
iv ADSP-BF53x EZ-Extender 1 Manual
HSC Interface ......................................................................... 2-3
OmniVision Interface ............................................................. 2-3
LCD Interface ......................................................................... 2-4
DIP Switches ................................................................................ 2-5
Direction Control DIP Switch ................................................. 2-5
Frame Sync and Clock Routing Select DIP Switch ................... 2-7
Clock ........................................................................................... 2-8
Connectors ................................................................................. 2-10
HSC Connectors Pinout ....................................................... 2-10
OmniVision Connector Pinout ............................................. 2-11
LCD Connector Pin-out ....................................................... 2-12
SPI Connector Pinout ........................................................... 2-13
BILL OF MATERIALS
INDEX

ADSP-BF53x EZ-Extender 1 Manual v
PREFACE
Thank you for purchasing the ADSP-BF53x EZ-Extender 1, Analog
Devices (ADI) extension board to the EZ-KIT Lite™ evaluation system
for ADSP-BF53x Blackfin®processors.
The Blackfin processors are embedded processors that support a Media
Instruction Set Computing (MISC) architecture. This architecture is the
natural merging of RISC, media functions, and digital signal processing
(DSP) characteristics towards delivering signal processing performance in
a microprocessor-like environment.
The ADSP-BF53x EZ-KIT Lite and EZ-Extender are designed to be used
in conjunction with the VisualDSP++™ development environment. Visu-
alDSP++ offers a powerful programming tool with new flexibility that
significantly decreases the time required to port software code to a proces-
sor, reducing time-to-market. The evaluation suite of VisualDSP++
software included with the EZ-KIT Lite is limited in program memory
size for use solely with the EZ-KIT Lite product.
To learn more about Analog Devices development software, go to
http://www.analog.com/processors/tools/.
Example programs are available to demonstrate the capabilities of the
ADSP-BF53x EZ-Extender board.
The extender features:
• OmniVision Camera Interface
DConnection to OmniVision OV6630AA Evaluation Board
D32-pin, right angle, 0.1 in. spacing, female socket

Purpose of This Manual
vi ADSP-BF53x EZ-Extender 1 Manual
• High-Speed Converter (HSC) Evaluation Board Interface
D40-pin, right angle, 0.1 in. spacing, female socket to con-
nect to Analog-to-Digital Converter (ADC) boards
D40-pin straight, 0.1 in. spacing header to connect to Digi-
tal-to-Analog Converter (DAC) boards
DSwitch for clock routing and direction selection
DRJ45 with Serial Peripheral Interconnect (SPI) to configure
converter registers
•LCDInterface
D32-pin, right angle FLZ-type connector to connect to LCD
boards
• SMT Footprint Area
D1206 and 805 footprints
DSOIC24 and SOIC20 footprints
Purpose of This Manual
The ADSP-BF53x EZ-Extender 1 Manual describes the operation and con-
figuration of the components on the board. A schematic and a bill of
materials are provided as a reference for future ADSP-BF53x Blackfin pro-
cessor board designs.
Intended Audience
This manual is a user’s guide and reference to the ADSP-BF53x
EZ-Extender 1. Programmers who are familiar with the Analog Devices
Blackfin processor architecture, operation, and development tools are the
primary audience for this manual.

ADSP-BF53x EZ-Extender 1 Manual vii
Preface
Programmers who are unfamiliar with VisualDSP++ or EZ-KIT Lite eval-
uation software should refer to the ADSP-BF53x EZ-KIT Lite Evaluation
System Manual, VisualDSP++ online Help, and user’s or getting started
guides. For the locations of these documents, refer to “Product Related
Documents”.
Manual Contents
The manual consists of:
• Chapter 1, “Using EZ-Extender” on page 1-1
Provides basic board information.
• Chapter 2, “EZ-Extender Hardware Reference” on page 2-1
Provides information on the hardware aspects of the board.
• Appendix A, “Bill Of Materials” on page A-1
Provides a list of components used to manufacture the
EZ-Extender board.
• Appendix B, “Schematics” on page B-1
Provides the resources to allow EZ-Extender board-level debug-
ging or to use as a reference design.
This appendix is not part of the online Help. Go to the PDF ver-
sion of the ADSP-BF53x EZ-Extender 1 Manual located in the
Docs\EZ-KIT Lite Manuals folder on the VisualDSP++ installation
CD to see the schematics.
What’s New in This Manual
This is the first edition of the ADSP-BF53x EZ-Extender 1 Manual.

Technical or Customer Support
viii ADSP-BF53x EZ-Extender 1 Manual
Technical or Customer Support
You can reach DSP Tools Support in the following ways.
• Visit the DSP Development Tools Web site at
www.analog.com/technology/dsp/developmentTools/index.html
• E-mail questions to
[email protected]
• Phone questions to 1-800-ANALOGD
• Contact your Analog Devices local sales office or authorized
distributor
• Send questions by mail to
Analog Devices, Inc.
One Technology Way
P.O. Box 9106
Norwood, MA 02062-9106
USA
Supported Products
The ADSP-BF53x EZ-Extender 1 is designed as an extension to an
ADSP-BF53x EZ-KIT Lite evaluation system.

ADSP-BF53x EZ-Extender 1 Manual ix
Preface
Embedded Processor Product Information
For information on embedded processors, visit our Web site at
www.analog.com/processors, which provides access to technical publica-
tions, data sheets, application notes, product overviews, and product
announcements.
You may also obtain additional information about Analog Devices and its
products by:
• E-mailing questions or requests for information to
[email protected]
• Faxing questions or requests for information to 1-781-461-3010
(North America) or [phone] (Europe)
Product Related Documents
For information on product-related development software, see the follow-
ing publications.
The listed documents can be found through online Help or in the Docs
folder of your VisualDSP++ installation. Most documents are available in
printed form.
Table 1. Related Processor Publications
Title Description
ADSP-BF533 Embedded Processor Datasheet General functional description, pinout, and
timing.
ADSP-BF533 Blackfin Processor Hardware
Reference
Description of internal processor architecture
and all register functions.
Blackfin Processor Instruction Set Reference Description of all allowed processor assembly
instructions.

Notation Conventions
x ADSP-BF53x EZ-Extender 1 Manual
Notation Conventions
The following table identifies and describes text conventions used in this
manual. Additional conventions, which apply only to specific chapters,
may appear throughout this document.
Table 2. Related VisualDSP++ Publications
Title Description
ADSP-BF533 EZ-KIT Lite Evaluation System
Manual
Detailed description of the EZ-KIT Lite fea-
tures and usage.
VisualDSP++ 3.1 User’s Guide for Blackfin Pro-
cessors
Detailed description of VisualDSP++ 3.1 fea-
tures and usage.
VisualDSP++ 3.1 Assembler and Preprocessor
Manual for Blackfin Processors
Description of the assembler function and
commands for Blackfin processors.
VisualDSP++ 3.1 C/C++ Complier and Library
Manual for Blackfin Processors
Description of the complier function and com-
mands for Blackfin processors
VisualDSP++ 3.1 Linker & Utilities Manual for
Blackfin Processors
Description of the linker function and com-
mands for the Blackfin processors.
Example Description
PF9–0Registers, connectors, pins, commands, directives, keywords, code exam-
ples, and feature names are in text with letter gothic font.
Note: A note providing information of special interest or identifying a
related topic. In the online version of this book, the word Note appears
instead of the symbol.
ion: A caution providing information about critical design or programming
issues that influence operation of a product. In the online version of this
book, the word Caution appears instead of the symbol.
[