APO DK-9821 MK-II User manual
MULTI-PURPOSE
DIGITAL ACCESS CONTROL KEYPAD
DK-9821 MK-II
Programming & Installation Manual
FOR ELECTRIC LOCK AND INTER-LOCK
SYSTEM INSTALLATIONS
TABLE OF CONTENTS
INTRODUCTION
DESCRIPTION OF CONNECTION TERMINALS & INDICATORS
STANDARD PROGRAMMING SUMMARY CHART
SETTING & PROGRAMMING
SET KEYPAD TO SINGLE USER MODE (to whom it may require)
SPECIFICATIONS
APPLICATION EXAMPLE
APPLICATION HINTS FOR THE AUXILIARY FACILITIES
AUXILIARY INFORMATION
······························································································································· 3
······················································ 3-7
················································································································· 4-6
························································································································· 6
··········································································· 6
·········································································· 7-9
······································································································ 10-26
············································································································· 10
····························································································· 10
············· 10
······························································································ 11
··················································································· 11
······································································································· 12
························································································ 13-14
·································································································· 15
··································································································· 16
·············································································· 17
········································································· 18-19
·················································································· 20
················································································ 21
········································································································· 22
······································································································ 22
··················································································· 23
·················································································································· 23
································································································ 23
·········································································································· 24-25
·········································································· 25
············································· 26-27
································································ 26
·········································································· 27
······························································································································ 28
············································································································ 29-30
······························································ 31-32
············································································································· 33
2
INTRODUCTION
DESCRIPTION OF CONNECTION TERMINALS & INDICATORS
DOOR BELL
N.O.
EG
IN
( – ) ( + )
12V DC
( + ) ( – )
DOOD LOCK
TAMPER
N.C.
( – )
GND
DOOR
SENS
O/P 1
INHIB
INT.
LOCK
KEY
ACT
DU
OUT
3
1 - 2 : DOOR BELL
3 - 4 : 12V DC --
5 - EG IN --
6 - 7 : OUTPUT 1 --
Fail-Secure Electric
Lock in Default
9 - 10 : TAMPER N.C.
11 : KEY ACT --
12 : DU OUT --
13 : GND (–) --
●
●
●
●
●
●
●
●
CONNECTION TERMINALS
4
14 : DOOR SENS --
NOTE:
1) Door Auto Re-lock
2) Door Forced Open Warning
3) Door Propped-up Warning
4) Inter-lock Control
15 : O/P 1 INHIB. --
16 : INT. LOCK
●
●
●
5
THE LED INDICATORS
MAINS (AMBER)
DOOR (GREEN)
INHIBIT (RED)
THE PACIFIER TONES & THE LED INDICATING SIGNALS
NOTE:
*
**
STATUS TONES*LED SIGNALS
1. In programming mode
---
1 Beep
2 Beeps
5 Beeps
Continuous Beeps
---
1 second Long Beep **
ON
1 Flash
2 Flashes
5 Flashes
Continuous Flashes
1 Flash in 2 seconds interval
---
2. Successful key entry
3. Successful code entry
4. Unsuccessful code entry
5. DAP jumper not replaced
6. In standby mode
7. Output relay activated
●
●
●
6
A) Enter Programming Mode with Master Code (Exit-Factory Master Code: 0 0 0 0)
NOTE:
B) System Refreshing –
C) Code Entries –
1) Recording Master Code and User Codes – (No Default Codes)
2) Recording Super User Code – (No Default Codes)
3) Recording Duress Codes – (No Default Codes)
4) Recording the Visitor Codes – (No Default Codes)
(Default: Momentary, 1-second for all 3 outputs)
STANDARD PROGRAMMING SUMMARY CHART
(default=1 second)
7
A) Enter Programming Mode with Master Code (Exit-Factory Master Code: 0 0 0 0)
NOTE:
B) System Refreshing –
C) Code Entries –
1) Recording Master Code and User Codes – (No Default Codes)
2) Recording Super User Code – (No Default Codes)
3) Recording Duress Codes – (No Default Codes)
4) Recording the Visitor Codes – (No Default Codes)
(Default: Momentary, 1-second for all 3 outputs)
(Default: Fail-Secure)
(Default: 10 tries / 30 seconds)
(default)
G) Door Forced-Open Warning – (Default: Disabled)
(default)
(Default: 1 long beep)
I) User Code Entry Modes (Auto or Manual) – (Default: Manual)
(Default: ON)
(default)
(default)
(default)
8
K) Main LED Flashing ON-OFF – (Default: Flashing)
L) Egress Delay & Warning – (Default: Instant, No warning)
(default)
M) Delay Time to Start Door Propped-up Warning – (Default: OFF)
(default)
N) Exit Programming Mode
(default)
9
Criteria for Programming
MUST
DO NOT
Enter and Exit Programming Mode
key.
Master Code
3. Exit the programming mode by pressing the
NOTE:
●
●
●
●
●
SETTING & PROGRAMMING
DAP
ON OFF
10
New Master Code
NOTE:
●
●
●
Programming Example :
0 0 0 0
2. Program a new Master Code 3 2 8 9 for the keypad:
NOTE:
●3 2 8 9
●
3 2 8 9
2. key to clear all the current stored data
except the Master Code:
NOTE:
●(default)
System Refresh (Complete Data Refresh) (Refresh Code 8901)
11
User ID Entry of Code
Output 1
NOTE:
●
●00-99
●
●
●
Programming Example :
3 2 8 9
2. Program an User Code 8 3 2 1 for output 1 ---------- One of the 100 user codes (user ID: 00-99,
taking ID = 01 as example):
Operaon (Manual Code Entry Mode)
NOTE:
12
Super User Code
NOTE:
●
●
●
●
Programming Example :
3 2 8 9
2. Program 2 5 8 0 as Super User Code:
Operaon :
13
NOTE:
●
●
●This feature is recommended for Fail-safe locks only.
●
REMARK :
●
●
●
●
●
●
3)
NOTE:
●
●
●
14
User ID Duress Code
NOTE:
●
●0-9
●
●
For example:1 3 5 7
3 3 5 7 1 3 5 8
●
●
Programming Example :
3 2 8 9
2. Program 3 3 5 7 as 1st Duress Code:
Program 2 3 9 8 0 as 2nd Duress Code --- if more user needs duress code:
Operaon :
NOTE :
●
●
15
One-Time
Time-Limit
User ID Entry of Code
NOTE:
●
●0-9
●
●
●
●
Programming Example :
3 2 8 9
2. Program a Visitor Code 1 3 7 8 at ID “0” for One-Time use:
3. Program a Visitor Code 2 3 0 8 9 at ID “1” with Time-Limit of 5 hours:
4. Program a Visitor Code 8 3 5 8 at ID “2” with Time-Limit of 10 hours:
Operaon :
16
Deleng Examples:
3289
a)
b)
c)
d)
17
Time Length
A)
B)
C)
D)
NOTE:
●
Programming Options for Output 1 (See “Programming Summary Chart” Secon D for more informaon) :
Example:
8 3 2 18 3
5 4 3 2 15 4
Example:
5 4 3 2 15 4 3
9 2 7 0 5 39 2 7
18
Operaon :
8 3 2 1
8 3 2 1
8 3 2 1
NOTE:
●The purpose of the accelerated Code --
●
Super User Code
Programming Examples:
3 2 8 9
2. Set Output 1 in momentary mode of 5 seconds:
3. Set Output 1 in Start / Stop Mode:
4. Set Output 1 in Start / Stop Mode with 2-digit Accelerated Start Code:
19
Type of Lock
Programming Codes for Type of Locks:
Important Note to Installer:
de-energized
(Default)
energized
20
Table of contents
Other APO Keypad manuals
APO
APO DK-9826 MK-II User manual
APO
APO DK-9330 A User manual
APO
APO DK-9865 MK-II User manual
APO
APO DK-9823 MK-II User manual
APO
APO DK-9350 User manual
APO
APO DK-9866 MK-II User manual
APO
APO DK-9522 MK-II User manual
APO
APO DK-9820 MK-II User manual
APO
APO DK-9827 MK-II User manual
APO
APO DK-9520 MK-II User manual
Popular Keypad manuals by other brands
Spidertracks
Spidertracks Spider X Keypad user manual
Lenze
Lenze EPM-H410 instructions
Cambridge Audio
Cambridge Audio A-BUS Table-Top Keypad Incognito BK10 installation guide
YASKAWA
YASKAWA JVOP-KPLCB04AxB installation manual
Interlogix
Interlogix NX1192E installation manual
Nortek
Nortek 212iLW? 242iLW Installation & programming manual
GE
GE NetworX NX-1500E user manual
AMC
AMC K-LCDW800 installation manual
Samsung
Samsung DS 5000 Series Quick reference guide
Nortek Security & Control
Nortek Security & Control 2GIG 2GIG-PAD1-345 installation instructions
NAPCO
NAPCO MAGNUM ALERT RP3000 KEYPAD operating guide
Chamberlain
Chamberlain LiftMaster TAC2C Programming guide