Apollo REACH WIRELESS RW1500-210APO User manual

Remove the mounting from the sounder by
pulling apart the two pieces.
Remove the sounder interface module
from the base.
Insert the sounder interface module into the base
locating the bottom tags and pushing back in.
THE BOX
Product Part Number Open-Area Sounder
Product Description
RW1500-210APO
REACH O-A Sndr VAD Cat. W - WT Bdy
(WT Fl) (W-2.5-7)
RW1500-210APO
REACH O-A Sndr VAD Cat. W - WT Bdy (WT Fl) (W-2.5-7)
Apollo Fire Detectors Ltd. 36 Brookside Road, Havant, Hampshire, United Kingdom, PO9 1JR
T: [phone] - E: techsales@apollo-fire.com - W: www.apollo-fire.co.uk RW_QSG_AV_OA_SNDR_VAD_WT_A.5
RW1500-210APO
Scan QR code
for full user manual
1
3
2
4
5 6
UNBOXI NG
• When unboxing the sounder you will find the unit, its mounting base, a gasket and a
security key.
• The device comes with pre-formed mounting mould to ensure ease of drilling.
• Security key prongs are fitted to protect againts unwanted removal of the
attached device.
• DIP switches are found inside the sounder to select your desired tone
and volume.
-
,
For more information, please refer to the user manual. Available on apollo-fire.co.uk

RW1500-210APO
REACH O-A Sndr VAD Cat. W - WT Bdy (WT Fl) (W-2.5-7)
Apollo Fire Detectors Ltd. 36 Brookside Road, Havant, Hampshire, United Kingdom, PO9 1JR
T: [phone] - E: techsales@apollo-fire.com - W: www.apollo-fire.co.uk RW_QSG_AV_OA_SNDR_VAD_WT_A.5
EN 54-3 approved volume
*
Apollo Tone
Pair Number
DIP Switch
Value
Primary Tone (Evacuation) Secondary Tone (Alert)
Temporal Pattern Icon Temporal Pattern
Description Frequencies Temporal Pattern Icon Temporal Pattern
Description
Frequencies
1* 0000 Apollo Fire Systems
Evacuate Tone 660Hz for 0.5s, 925Hz for 0.5s
Apollo Fire Systems Alert
Tone 1s off, 925Hz for 1s
2* 00001 Alternaternating warble
(Hochiki & Fulleon)
925Hz for 0.25s, 626Hz
for 0.25s
Continuous (Hochiki &
Fulleon) 925Hz
3* 00010 Sweep (med) @ 1Hz 800Hz - 970Hz @ 1Hz Continuous 970Hz Continuous
(BS5839-1:2002)
4* 00011 Sweep (fast) @ 9Hz 2500Hz-2850Hz @ 9Hz Continuous 2850Hz continuous
5* 00100
Netherlands – NEN
2575:2000 (Dutch Slow
Whoop)
500 – 1200Hz for 3.5s, 0.5s
OFF Continuous 825Hz continuous
6* 00101 German DIN 33 404 1200Hz – 500Hz Sweep 1s
(1Hz) Continuous 825Hz Continuous
7* 00110 Swedish Fire Signal 660Hz 0.15s ON, 0.15s OFF Swedish All Clear 660Hz Continuous
8 00111
Australia Fast-rise Sweep
(AS1670:4-2004
Evacuation tone)
3x (500Hz - 1200Hz for 0.5s,
0.5s off), 1s off
Australia AS1670:4-2004
Alert tone
420Hz 0.625s ON, 0.625s
OFF
9 01000
New Zealand Slow-rise
Sweep Evacuation Tone
(NZS 4512)
500Hz – 1200Hz, 3.75s
Sweep, 0.25s OFF
New Zealand Alert Tone
(NZS 4512)
420Hz 0.625s ON, 0.625s
OFF
10 01001 US Temporal LF (ISO
8201) Low tone
3x(970Hz 0.5s ON, 0.5s OFF),
1s OFF Continuous 970Hz Continuous
11 01010 US Temporal HF ISO 8201
High tone
3x(2850Hz 0.5s ON, 0.5s
OFF), 1s off Continuous 2850Hz continuous
12 01011 Simulated Bell -
Continuous
827Hz for 16ms followed by
990Hz for 16ms. Simulated Bell - Intermittent
827Hz for 16ms followed
by 990Hz for 16ms for 1s
then 1s off.
13 01100 Emergency Warning Siren 600Hz – 1200Hz 4s followed
by 1200 – 600Hz 4s
Emergency Warning Siren
All Clear 1200Hz Continuous
14 01101 France – AFNOR NF S 32
001 554Hz, 0.1s, 440Hz, 0.4s Continuous 970Hz Continuous
15 01110 Australia Evacuation
(AS7240-3)
520Hz, 0.5s ON, 0.5s OFF x 3,
1s OFF Australia Alert (AS7240-3) 520Hz +/-5%, 0.5s ON, 3.5s OFF
16 10000 Silent Tone (Reach
Wireless ONLY) 0Hz Continuous Silent Tone (Reach
Wireless ONLY) 0Hz Continuous