Argos 2463834 User manual

Assembly Instructions - Please keep for future reference
Assembly Instructions - Please keep for future reference
If you need help or have damaged or missing parts, call the Argos Customer Helpline: 0845 640 30 30
White 2463834
Issue 1 - 25-05-2014
Mia 2 Door Wardrobe
Dimensions
Width
Depth
Height
:
:
:
350269
88.5 cm
52.3 cm
181.2 cm

!Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
1
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not recommend the use
of power drill/drivers for
inserting screws, as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page
with these instructions for
future reference.

Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components, call
the Argos Customer Helpline: 0845 640 30 30
2
350269-03
2
(172,5 cm x 47,3 cm)
Side, left
4x
1
(88,5 cm x 52,3 cm)
Top
3
(172,5 cm x 47,3 cm)
Side, right
4
(179,7 cm x 4,4 cm)
Post
8
(76,7 cm x 9,5 cm)
Front rail
7
(76,7 cm x 48,9 cm)
Bottom
5
(167,3 cm x 39,5 cm)
Back 2
x
6
(163 cm x 1,7 cm)
H-profile
10
(75,7 cm x 2,2 cm)
Hanging rail
9
(76,7 cm x 46,5 cm)
Shelf
11
(164,6 cm x 37,9 cm)
Door, left
12
(164,6 cm x 37,9 cm)
Door, right

Components - Fittings
Please check you have all the panels listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more ttings
may be supplied than are required.
3350269-04
12 ø7.8 x 40mm Wooden dowel x
Aa
Cb
ø5 x 8, cc34mm Bolt x 12
Ca
ø15 x 10.5mm Cam x
12
1.2 x 15mm Nail x
Di
50
Kb
ø5.8 x 8mm Screw x
4
17060 16040 90 15013070 120100 14011050 803020100
Ruler - Use this ruler to help correctly identify the screws
Tools required
Flatblade screwdriver
(Medium)
Hammer Phillips screwdriver
(Medium & large)
ø4 x 25mm Screw x
Jb
24
2
Vl
44 x 23 x 23mm Angle x
Ko
8
ø4,2 x 9,5mm Screw x
Magnet, adjustable x
Pc
4
35 x 12 x 1mm Magnet catch x
Pd
4
Mf
6
ø26mm Cup hinge x
Mc
6
0mm Crossplate x
Fl
2
Support for hanger rail - 15mm x
ø3 x 12mm Screw x
Bo
20
Wall strap and instruction x 1
Fh
Vn
Angle 23 x 23 x 24mm x 1
Shelf support x
Fr
4

Assembly Instructions
Fix the posts
4
onto the
sides
2
and
3
using
screws
Jb
into the holes
indicated.
The top of the posts
4
and
the sides
2
and
3
must be
ush.
Step 1.1
Assembly of the
wardrobe.
Step 1
4
350263-05
ø4 x 25mm Screw x
Jb
24
Jb
Jb
Jb
Jb
Jb
Jb
Jb
Jb
Jb
Jb
Jb
Jb
3
4
4
4
4
2
Jb
Jb
Jb
Jb
Jb
44
32
Jb
Jb
Jb
Jb
2
3
1
4
4
84
7
5
5
6
4
9
Jb
Jb
Jb
Jb

Assembly Instructions
Knock the dowels
Aa
into
the holes indicated
on the sides 2
and
3
.
Use
a small
hammer.
Screw
the bolts
Cb
into
the holes indicated on the
sides
2
and
3
.
Step 1.2
Fix the Crossplates
Mc
to the sides 2
and
3
using the pre-mounted
screws.
Note the details.
Position the Crossplates
Mc
exactly as shown.
Fix the supports for
hangerrails
Fl
onto the
sides 2 and
3
using
screws
Bo
.
Step 1.3
350269-06
5
Cb
ø5 x 8, cc34mm Bolt x 6
6 ø7.8 x 40mm Wooden dowel x
Aa
Aa
Aa
Aa
Aa
3
2
ø3 x 12mm Screw x
Bo
2
Fl
2
Support for hanger rail - 15mm x
Mc
6
0mm Crossplate x
Cb
Cb
Cb
Cb
Cb
Cb
Aa
Aa
Bo
Fl
Mc
Mc
Mc
Mc
Mc
Mc
Bo
Fl
2
3

Assembly Instructions
Knock the dowels
Aa
into
the holes indicated on
the bottom 7
using a
small hammer.
Press the magnets
Pc
into the holes indicated
on the bottom
7 .
Step 1.5
Fix the angles
Vl
using
screws
Ko
into the holes
indicated on the front
rail
6
.
Step 1.4
Place the sides 2and
3onto the bottom 7.
Push cams
Ca
into the
holes indicated on the
bottom 7. Arrows
pointing towards the
sides 2/3.
Turn the cams
Ca
to the
right to x the sides 2
and 3.
Step 1.6
6
350269-07
6 ø7.8 x 40mm Wooden dowel x
Aa
2
Vl
44 x 23 x 23mm Angle x
Ko
4
ø4,2 x 9,5mm Screw x
Ko
Ko
Magnet, adjustable x
Pc
2
Ko
Vl
8
8
7
Aa
Aa
Aa
Pc
Aa
Aa
Aa Pc
Vn
Angle 23 x 23 x 24mm x 1
ø3 x 12mm Screw x
Bo
1
2
7
Ca
Ca
Ca
Ca
Ca
Ca
3
Ca
ø15 x 10.5mm Cam x
6
Vn
Vl
Bo

Assembly Instructions
Place the top 1onto the
sides 2and 3.
Push cams
Ca
into the
holes indicated on the
sides 2and 3.
Arrows pointing towards
the top 1.
Turn the cams
Ca
to the
right to x the top 1.
Step 1.8
Place the front rail 8
as shown.
Fix the angles
Vl
to the
sides using screws
Ko
.
See detail.
Step 1.9
Screw the bolts
Cb
into
the holes indicated on the
top
1
.
Press the magnets
Pc
into the holes indicated
on the top
1 .
Step 1.7
350269-08
7
Ca
ø15 x 10.5mm Cam x
6
Ca
Ca
1
Cb
ø5 x 8, cc34mm Bolt x 6
Ca
2
3
Pc
Cb
Cb
Cb
Cb
Cb
Cb
1
Pc
Ca
8
Ko
Ko
Bo
7
3
2
Ko
4
ø4,2 x 9,5mm Screw x
Magnet, adjustable x
Pc
2

Assembly Instructions
Step 1.11
!
Important!
The wardrobe is
heavy. Lift with
care.
Its recommended that the
wardrobe is xed to the wall.
Use the ttings
Fh
. Follow
the instructions included
with the ttings.
Fix the shelf supports
Fr
to the
2and 3 using
screws
Kb
into the holes
indicated.
Lower the shelf
9
onto the
shelf supports
Fr
.
Step 1.10
Place the backs 5into
the rabbet on the top 1
into the H-prole 6and
onto the posts 4.
!
Important!
Make sure the
angle between the
top
1
and the posts
4
is
90° when the backs
5
is
attached.
Fix the backs
5
to the top
1, the posts 4and the
bottom 7
using
nails
Di
.
Use a small hammer.
350269-08
7
Ca
ø15 x 10.5mm Cam x
6
Ca
Ca
1
Cb
ø5 x 8, cc34mm Bolt x 6
Ca
2
3
Pc
Cb
Cb
Cb
Cb
Cb
Cb
1
Pc
Ca
8
Ko
Ko
Bo
7
3
2
Ko
4
ø4,2 x 9,5mm Screw x
Magnet, adjustable x
Pc
2
8
350269-09
1.2 x 15mm Nail x
Di
36
Distribute equally !
5
Di
4
4
1
5
6
Di
Di
Di
1
1
Kb
ø5.8 x 8mm Screw x
4
Shelf support x
Fr
4
Wall strap and instruction x 1
Fh
Kb Fr
Kb
Fr
Kb
Fr
9

Assembly Instructions
Place the cup hinges
Mf
into the holes indicated
on the doors
11 and 12 .
Fix the hinges using
screws
Bo
.
Fix the magnet catches
Pd
using screws
Bo
into
the holes indicated.
Step 2.1
Assembly of the doors.
Step 2
350269-10
9
12
Mf
Bo
Bo
Mf
6
ø26mm Cup hinge x
35 x 12 x 1mm Magnet catch x
Pd
4
ø3 x 12mm Screw x
Bo
16
Bo
Bo
Bo
11
12
10
11
Mf
Bo
Pd
Pd
Bo
Bo
Mf
Mf
Bo
Bo
Mf
Bo
Pd
Mf
Pd