Argos BASIC TALLBOY MIRROR CABINET 402/9166 User manual

402/9166
BASIC TALLBOY MIRROR CABINET
30cm
28cm
180cm
Issue 1- 30/03/15

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
• Check you have all the
components and tools listed on
pages 2 and 3..
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product,
this could cause damage.
•Assemble the item as close
room) as possible.
•Assemble on a soft level
surface to avoid damaging the
• Parts of the assembly will be
easier with 2 people.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
•This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
•Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts
• Regularly check and ensure
tightend properly.
Handy Hints
• We do not
recommend the use
of power drill/drivers
for inserting screws,
as this could damage
the using. Only use hand
screwdrivers

1Top panel x 1
(30(w)cm x 28(d)cm)
5Lower right side panel x 1
(118.8(w)cm x 28(d)cm)
9 Shelf panel x 2
(26.9(w)cm x 26.1(d)cm)
13 Upper back panel x 1
(60.5(w)cm x 29.8(d)cm)
14 Lower back panel x 1
(115.4(w)cm x 29.8(d)cm)
10 Door panel x 1
(52.6(w)cm x26.5(d)cm)
11 Upper door panel x 1
(58(w)cm x 26.5(d)cm)
12 Cross bar x 1
(27(w)cm x 4(d)cm)
6Shelf panel x 1
(30(w)cm x 28(d)cm)
7 Shelf panel x 2
(27(d)cm x 27.9(w)cm)
8 Shelf panel x 1
(27(d)cm x 27.9(w)cm)
2Upper left side panel x 1
(58.5(w)cm x 28(d)cm)
3upper right side panel x 1
(58.5(w)cm x 28(d)cm)
4 Lower left side panel x 1
(118.8(w)cm x 28(d)cm)

35mm Male camlock x 20
45mm Screw x 4
Shelf bracket x 8
16mm Bolt x 2
35mm Screw x 1
Washer x 2 Wall plug x 1
12mm Screw x 1
14mm Screw x 4 12mm Screw x 20
Hinge x 4 Magnetic catch x 2
Magnetic catch plate x 2
Female camlock x 20 30mm Wooden dowel x 4
Knob x 2
N
P Q R
12mm Sticker x 8
S
Safety strap x 1
O
12mm Screw x 28

Connect the male
camlock as directed in
the assembly instructions
using a screwdriver.
Push the male camlock
into the entry hole.
lnsert the female
camlock as shown in the
instructions
Note: ensure that the
Turn the female camlock
clockwise with a
arrow on the top of the
camlock points towards
the entry hole for the
male camlock.
screwdriver.
You should feel a click
when the camlock is
locked in place.
The joint is now secure.
Using Camlocks

Insert 12 x male camlock
into inside of lower left
side panel and lower
right side panel as
shown.
A
4
5
Insert 4 x male camlock
into underside of shelf
panel as shown.
A
6
Insert 4 x male camlock
into underside of top
panel and fix 1 x
magnetic catch on it
using 2 x 14mm screw
as shown.
fix 1 x magnetic catch
on underside of shelf
panel using 2 x 14mm
screw as shown.
A
1
8
F
F
H
H
A
A
A
5
1
4
H
F
H
F
8
A
6

Attach top panel to
the upper left side panel
and the upper right
side panel using 4 x
female camlock as
shown.
Tighten female camlocks
with a screwdriver.
Please refer to the “Using
Camlocks” section at the
front of this instruction for
further assistance.
Attach shelf panel
to the the upper left side
panel and the upper
right side panel
using 4 x 45mm screw
as shown.
B
D
2
2
3
6
3
1
Attach 2 x shelf panel
and 1 x shelf panel
to lower right side
panel using 6 x female
camlock as shown.
Tighten female camlocks
with a screwdriver.
Insert 2 x wooden dowel
into cross bar and
attach it to the lower right
side panel as shown.
B
C
7
8
12
5
5
D
B
2
6
1
3
B
5
7
7
8
C
12

Insert 2 x wooden dowel
into cross bar as
shown.
Attach lower left side
panel to the assembled
part using 6 x female
camlock as shown.
Tighten female camlocks
with a screwdriver.
C
B
12
4
Connect the assembled
upper part to the
assembled lower part
using 4 x female camlock
as shown.
Tighten female camlocks
with a screwdriver.
B
Attach upper back panel
and lower back panel
to the assembled
part using 28 x 12mm
screw as shown.
K
13
14
6
7
8
B
13
14
K
4
C
B

Insert 4 x shelf bracket
into inside of the upper
left side panel and the
upper right side panel
then put 1 x shelf
panel on them as
shown.
Insert 4 x shelf bracket
into inside of the lower
left side panel and the
lower right side panel
then put the other
shelf panel on them
as shown.
Gently tighten the upper
and the middle 8 x female
camlocks and paste 8 x
20mm sticker over the
holes of them as shown.
9
9
3
4
5
2
J
J
9
S
J
9
J
S
S
9

Fix unit to wall using 1 x
12mm screw , 1 x
safety strap , 2 x
washer , 1 x 35mm
screw and 1 x wall
plug as shown.
11
N
O
P
Q
R
M
plate to the lower door
Fix 1 x magnetic catch
panel using 2 x 12mm
screw as shown.
Fix 1 x knob to the
lower door panel
using 1 x bolt as shown.
Attach the lower door
panel to the lower right
side panel using 2 x
hinge and 8 x 12mm
screw as shown.
Repeat above steps to
attach the upper door
panel to the upper
left side panel as
shown.
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 640 0800
Argos LTD. 489-499 Avebury boulevard, Central Milton Keynes, MK9 2NW
I
L
10
10
10
I
E
10
N
L
G
I
I
E
M
Q
O
PQOR
10
11
5
3
G