Argos Mia 2573968 User manual

Assembly Instructions - Please keep for future reference
Assembly Instructions - Please keep for future reference
If you need help or have damaged or missing parts, call the Argos Customer Helpline: 0845 640 30 30
White 2573968
Issue 00 - 25-05-2014
Mia Toybox
Dimensions
Width
Depth
Height
:
:
:
350273-01
80.0 cm
42.0 cm
46.5 cm

!Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
1
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not recommend the use
of power drill/drivers for
inserting screws, as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page
with these instructions for
future reference.

Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components, call
the Argos Customer Helpline: 0845 640 30 30
2
350273-03
3
(32,3 cm x 38,0 cm)
Side
4
x
1
(45 cm x 4,4 cm)
Post
4
(71 cm x 38,0 cm)
Back
5
(80,0 cm x 42 cm)
Lid
2
(71 cm x 40 cm)
Front
6
(69,2 cm x 33,5 cm)
Bottom
2
x

Components - Fittings
Please check you have all the panels listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more ttings
may be supplied than are required.
3350273-04
8 ø7.8 x 40mm Wooden dowel x
Aa
Cb
ø5 x 8, cc34mm Bolt x 8
Ca
ø15 x 10.5mm Cam x
8
17060 16040 90 15013070 120100 14011050 803020100
Ruler - Use this ruler to help correctly identify the screws
Tools required
Flatblade screwdriver
(Medium)
Hammer Phillips screwdriver
(Medium & large)
ø4 x 25mm Screw x
Jb
12
ø3 x 12mm Screw x
Bo
13
Adhesive seal cap x
Em
8
37,5 x 28,5mm Leaf hinge x
Mi
2 Flap stay x
Mk
1

Assembly Instructions
Fix the posts
1
onto the
front
4
and the back
2
using screws
Jb
into the
holes indicated.
The top of the posts
1
and
the front
4
and the back
2
must be ush.
Step 1.2
Assembly of the Toybox.
Step 1
Knock the dowels
Aa
into the holes indicated
on the sides
3
using a
small hammer.
Step 1.1
4
350270-05
ø4 x 25mm Screw x
Jb
12
4
ø7.8 x 40mm Wooden dowel x
Aa
3
5
1
1
2
4
3
1
6
1
2
x
3
4
1
1
1
2
1
Aa
Aa
Aa
Aa
Jb
Jb
Jb
Jb
Jb
Jb
Jb
Jb
Jb
Jb
Jb
Jb

Assembly Instructions
Place the sides 3onto
the front 2.
Push cams
Ca
into the
holes indicated on the
sides 3.
Arrows pointing towards
the front 2.
Turn the cams
Ca
to the
right to x the sides 3.
Step 1.4
Screw the bolts
Cb
into
the holes indicated on the
back
2
and the front
4
.
Step 1.3
Slide the bottom
6
into
the grooves on the sides
3
and the front
2.
Step 1.5
350273-06
5
2
4
Ca
ø15 x 10.5mm Cam x
4
Cb
ø5 x 8, cc34mm Bolt x 8
Cb
Cb
Cb
Cb
Cb
Cb
Cb
Cb
6
3
3
3
3
2
Ca
Ca
Ca

Assembly Instructions
Place the leaf hinges
Mi
onto the lid 5as shown.
Fix the leaf hinges
Mi
using screws
Bo
.
See detail.
Step 1.7
Place the back 14 onto
the sides 3.
Push cams
Ca
into the
holes indicated on the
sides 3.
Arrows pointing towards
the back 4.
Turn the cams
Ca
to the
right to x the back 4.
Step 1.6
Place the lid 5onto the
toybox as shown, the leaf
hinges
Mi
point towards
the back 4.
Fix the leaf hinges
Mi
to the posts 1using
screws
Bo
.
See detail.
Step 1.8
6
350273-07
Ca
ø15 x 10.5mm Cam x
4
37,5 x 28,5mm Leaf hinge x
Mi
2
ø3 x 12mm Screw x
Bo
4
ø3 x 12mm Screw x
Bo
4
4
3
3
5
5
Bo
Mi
Mi
Bo
Bo
Bo
11
4
Ca
Ca
Ca
Ca

Assembly Instructions
Step 1.9
Fix the ap stay
Mi
onto
the right hand side 3
and the lid 5using
screws
Bo
.
Place the adhesive seal
caps
Em
onto the holes in
the sides
3
.
Adjust the friction of the
ap stay
Ba
by turning
the adjustment screw.
See detail.
Step 1.10
350273-08
7
ø3 x 12mm Screw x
Bo
5
Bo
Bo
Flap stay x
Mk
1
Adhesive seal cap x
Em
8
Bo Mk
Bo
Mk
Bo
Em
Em
5
3
Mk