Assa Abloy RD150-3 User manual

Original instructions
User Manual Entrance Systems
Revolving Door
ASSA ABLOY RD150-3, RD150-4
assaabloyentrance.com

CONTENTS - Original instructions
4Instructions for safe operation .......................................................................................................
5Congratulations on your new automatic door! ........................................................................
5Electronic equipment reception interference ...........................................................................
5Environmental requirements ..........................................................................................................
5Product liability ...................................................................................................................................
6Warranty ................................................................................................................................................
6Service .....................................................................................................................................................
7Intended use .........................................................................................................................................
7Technical specification ......................................................................................................................
7How the ASSA ABLOY RD150-3 and ASSA ABLOY RD150-4 work ......................................
8Main parts ..............................................................................................................................................
9ON/OFF switch ......................................................................................................................................
9Start up .........................................................................................................................
9ON ........................................................................................................................
9OFF ........................................................................................................................
9Reset ..............................................................................................................................
10Safety .......................................................................................................................................................
10Safety device on the door ......................................................................................
11Pressure sensitive safety edges .............................................................................
11Force sensitive door leaves ....................................................................................
12Emergency stop button ..........................................................................................
13Regular safety checks .........................................................................................................................
16Troubleshooting ..................................................................................................................................
17Service/Maintenance .........................................................................................................................
18Options ...................................................................................................................................................
18Lighting LED with control .......................................................................................
18Additional emergency stop button ....................................................................
19Infrared presence sensing system .......................................................................
19Laser presence sensing system .............................................................................
20Pressure sensitive safety edges .............................................................................
20Mechanical lock .........................................................................................................
21Vertical presence photocell sensor PDR ...........................................................
1014896-en-7.0Issue 2020-10-092

21Accessories ............................................................................................................................................
21Direction sensing radar DSR ..................................................................................
21Night closing door (Not used in US and Canada) ..........................................
22Other products from ASSA ABLOY Entrance Systems .............................................................
23Declaration of conformity ................................................................................................................
ASSA ABLOY as word and logo are trademarks owned by the ASSA ABLOY Group
©ASSA ABLOY Entrance Systems, 2020
Technical data subject to change without notice.
Backtrack information: folder:Workspace Main, version:a620, Date:2020-10-09 time:06:38:32, state: Frozen
3Issue 2020-10-091014896-en-7.0

Instructions for safe operation
•Failure to observe the information in this manual may
result in personal injury or damage to equipment.
•To reduce the risk of injury of persons - use this door
set only as a pedestrian door.
•Do not use the equipment if repair or adjustment is
necessary.
•Disconnect supply when cleaning or other mainten-
ance is to be carried out.
•The operator can be used by children over 8 years of
age if they have been instructed by a person in charge
of their safety.
•The operator can be used by children 8 years of age
or younger if they are supervised by a person respons-
ible for their safety.
•The operator can be used by persons with impaired
physical, sensory or mental capacity if they have been
instructed by a person in charge of their safety.
•Cleaning and user maintenance shall not be made by
children.
•Do not let anyone climb on or play with the door or
the fixed/remote controls.
•The doorset can be operated automatically by sensors
or manually by activators.
1014896-en-7.0Issue 2020-10-094

Congratulations on your new automatic door!
ASSA ABLOY Entrance Systems AB has developed automatic doors for more than 50 years. State-of-
the-art technology and carefully tested materials and components provide you with a superior
product.
As with all other technical products, your automatic door requires periodic maintenance and service.
It is essential that you know your automatic door (system) and that you recognize the importance
of maintaining it in compliance with applicable standards for safety.
Your local ASSA ABLOY Entrance Systems-authorized representative is familiar with these standards,
as well as all applicable local codes and ASSA ABLOY Entrance Systems recommendations for power-
operated pedestrian doors. Service and adjustments performed by your ASSA ABLOY Entrance
Systems-authorized representative, will ensure safe and proper operation of your automatic door
unit.
Electronic equipment reception interference
The equipment may generate and use radio frequency energy and if not installed and used properly,
it may cause interference to radio, television reception or other radio frequency type systems.
If other equipment does not fully comply with immunity requirements, interference may occur.
There is no guarantee that interference will not occur in a particular installation. If this equipment
does cause interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•Re-orient the receiving antenna.
•Relocate the receiver with respect to the equipment.
•Move the receiver away from the equipment.
•Plug the receiver into a different outlet so that equipment and receiver are on different branch
circuits.
•Check that protective earth (PE) is connected.
If necessary, the user should consult the dealer or an experienced electronics technician for additional
suggestions.
Environmental requirements
ASSA ABLOY Entrance Systems products are equipped with electronics and may also be equipped
with batteries containing materials which are hazardous to the environment. Disconnect power
before removing electronics and battery and make sure it is disposed of properly according to local
regulations (how and where) as was done with the packaging material.
Product liability
According to regulations, the following are the responsibility of the owner or caretaker of the
equipment
•that the equipment operates correctly, so that it gives sufficient protection in regard to safety
and health
•that the equipment is operated and regularly maintained, inspected and serviced by someone
with documented competence in the equipment and in applicable regulations
•that the provided “Service Log Book”and “Site Acceptance Test and Risk Assessment”documents
(PRA-0003) are kept available for maintenance and service records
•that inspection covers the emergency opening function (when applicable)
•that the closing force is appropriate for the door size on fire-approved door systems (when ap-
plicable).
5Issue 2020-10-091014896-en-7.0

Warranty
ASSA ABLOY Entrance Systems warrants its products to be free from defects in material and work-
manship under intended use and service for a warranty time of 12 months, beginning at time of
delivery. This warranty extends only to the original buyer of the equipment.
ASSA ABLOY Entrance Systems warrants that the software will operate substantially in accordance
with its functional descriptions and that it has been recorded on non-defective media.
The ASSA ABLOY Entrance Systems warranty does not apply to
•That the software will be error-free or operate without interruption
•General wear and tear on the system
•Fuse, disposable batteries and glass damage
•System deviations caused by installer other than ASSA ABLOY Entrance Systems
•System that has been altered or damaged by vandalism or misuse
•System that has been additionally equipped with non-ASSA ABLOY Entrance Systems original
branded parts and/or spare parts
•Unrequired visits due to poor client communication (door working when our technician arrives,
reset, power discontinuation)
•Adjustments (closing and opening speed and also detection field radars) due to customer re-
quests (excludes operational adjustments thought to create a hazard)
•Water damage
•Adverse weather conditions
•Any damage caused, directly or indirectly, by a circumstance beyond the control of the applicable
company within ASSA ABLOY Entrance Systems, such as industrial dispute, fire, natural disaster,
war, extensive military mobilization, insurrection, requisition, seizure, embargo, restrictions in
the use of power and defects or delays in deliveries by sub-contractors caused by any such cir-
cumstances
Please note:
•Non-compliance with manufacturers care and maintenance recommendations may void the
warranty.
•ASSA ABLOY Entrance Systems-authorized resellers shall extend this warranty to end-users only,
but have no authority to extend a greater or different warranty on behalf of ASSA ABLOY Entrance
Systems.
•A service agreement with ASSA ABLOY Entrance Systems will help secure the availability of a
fully operational system and will give priority at call-out, thus minimizing the time that the
equipment is unusable.
Service
Inspections should be done regularly by a trained and qualified person. The frequency of these in-
spections should be according to national regulations (or according to industry standard if there
are no national regulations). This is especially important when the installation concerns a fire-ap-
proved door or a door with an emergency-opening function. To extend the life of your investment
and ensure safe and reliable operation of the door, we recommend a minimum of 2 visits per year
or more, depending on usage and operating conditions. Environmental aspects shall also be con-
sidered.
As your entrances are part of your business flow, there’s every reason to keep them working well.
ASSA ABLOY Entrance Systems offers you a maintenance and modernization expertise to rely on.
Our Maintenance Programs and Modernization Services for entrance automation is backed by a ex-
tensive expertise for all types of pedestrian- and industrial door and docking systems, independent
of brand. At your disposal is a team of dedicated expert technicians, proven through decades of
maintenance, service and satisfied customers.
1014896-en-7.0Issue 2020-10-096

Intended use
The ASSA ABLOY RD150-3 and ASSA ABLOY RD150-4 are automatic revolving doors developed to
provide draught free access to buildings.
The door is designed to offer continuous use, a high degree of safety and maximum lifetime. The
system is self-adjusting to the effects caused by normal variations in the weather conditions and to
minor friction changes caused by e.g. dust and dirt.
The door can be used indoors or outdoors. Outdoor use with water resistant cover.
For installation and maintenance see Installation and Service manual 1014897.
Save these instructions for future reference.
Technical specification
ASSA ABLOY Entrance Systems ABManufacturer:
Lodjursgatan 10, SE-261 44 Landskrona, SwedenAddress:
ASSA ABLOY RD150-3 and ASSA ABLOY RD150-4Type:
100-240 V AC +10/-15%, 50/60 HzMains power supply:
360W including LED spot lights max. 30WPower consumption:
-20 to +50°CTemperature range:
IP20Degree of protection:
IP54Degree of protection,
control actuators:
Sound pressure:
Third party approvals from established certification organizations valid for
safety in use, see Declaration of Conformity.
Approvals:
How the ASSA ABLOY RD150-3 and ASSA ABLOY RD150-4 work
The door is designed so that operation is not affected or interrupted by winds or by users pushing
the doors. The unique control system was developed by ASSA ABLOY Entrance Systems specifically
for use with its products, and the result is a fully integrated entrance solution with no compromise
in design or function. The system ensures lowest operating/maintenance cost, highest safety and
best availability.
7Issue 2020-10-091014896-en-7.0

Main parts
1
8
8
4
3
5
11
6
7
E
M
E
R
G
E
N
C
Y
S
T
O
P
92
10
DescriptionNo.
Dust protection roof (max. load 0 kg)
Do not walk or store any material on the roof!
1
Control unit CDC100 (behind fascia sheets)2
Lighting LED with control (option)3
ON/OFF switch4
Emergency stop button5
Horizontal pressure sensitive safety edges on the door leaves (option)6
Vertical pressure sensitive safety edges on the door leaves (option)7
Activation units8
Vertical presence photocell sensor PDR (option)9
Infrared presence sensing system10
Pressure sensitive safety edges placed on the drum edges11
1014896-en-7.0Issue 2020-10-098

ON/OFF switch
Start up
•Check that the door emergency stop button is released. If not, release the emergency stop button
by rotating it in the direction of the arrows and press the reset button.
ON
•Turn the ON/OFF switch to ON.
•Auto start: The door stands still. When the door is activated by the inner or outer activation unit
or by pushing (Push and Go), the door rotates at normal speed through three compartments
and then stops.
OFF
•Check there is no traffic.
•Turn the ON/OFF switch to OFF.
The door rotates to its home position.
Reset
To reset the door to normal operation - release the emergency stop button by rotating it in the dir-
ection of the arrows and press reset button.
E
M
E
R
G
E
N
C
Y
S
T
O
P
9Issue 2020-10-091014896-en-7.0

Safety
Safety device on the door
The safety systems are monitored to ensure the high safety level of the door.
The condition of the safety equipment is periodically tested. This monitoring is made during normal
running conditions and it does not affect the normal day-to-day operations of the door.
1
2
3
A
B
E
M
E
R
G
E
N
C
Y
S
T
O
P
C
D
Standard
DescriptionNo.
Pressure sensitive safety edges placed on the drum edges, see page 11.1
Force sensitive door leaves, see page 11.2
Emergency stop button, see page 12.3
Options
DescriptionNo.
Horizontal pressure sensitive safety edges placed on the door leaves, see page 20.A
Vertical pressure sensitive safety edges placed on the door leaves, see page 20.B
Infrared presence sensing system, see page 19.C
Vertical presence photocell sensor PDR, see page 21.D
1014896-en-7.0Issue 2020-10-0910