Assa Abloy Yale 5300LN Series Quick start guide

5300LN SERIES
GRADE 2 KEY-IN-LEVER CYLINDRICAL LOCKSET
KEY-IN-LEVER
5300LN
PARTS & SERVICE MANUAL
PARTS

September 2003
HOW TO ORDER PARTS
Page 2 5300LN Series Parts & Service Manual
To order parts, use the appropriate part number and specify finish if necessary.
For example, to order 10 lockbodies for ten Entrance
Function (5307LN), use the following configuration:
Quantity Part Number Description
10 14-5307-0701-048 5307LN Lockbodies
-Please refer to the installation instructions for complete installation.
-For further assistance, contact your authorizedYSG Door Security Consultants distributor or contactYSG directly at [phone].
FINISH CHART
Finish Description Roses Levers Pushbuttons/
Turnbuttons Cylinder Plugs
605* Bright Brass, PVD 003 043 043 004
606* Satin Brass, PVD 004 044 044 004
609 Satin Brass, Blackened, Satin Relieved 609 609 609 004
612 Satin Bronze 010 050 050 004
613 Dark Oxidized Satin Bronze, Oil Rubbed 007 060 060 004
613e* Dark Oxidized Satin Bronze, PVD 13e 13e 13e 004
616 Satin Bronze, Blackened, Satin Relieved 616 616 616 004
619 Satin Nickel 619 619 619 025
625 Bright Chrome 026 026 026 025
626 Satin Chrome 025 025 025 025
693 Black Powder Coat 200 200 200 025
To order 10 sets of Augusta Levers for an Entrance Function
in Satin Chrome, use the following specification:
Quantity Part Number Description
10 14-5300-6039-025 Outside AU Cylinder Lever
in 626
To order 10 plug retainers for the 1802 Key-in-Lever Cylinder, use the following specification:
Quantity Part Number Description
10 99-9999-4561-999 1802 Cylinder Plug Retainers
*PVD finish standard on 605 and 606. Available as an option on 613 (as 613e) for customers desiring a non-wearing finish.
PVD LIFETIME FINISH
Physical Vapor Deposition (PVD) is a technologically advanced finish coating that provides the ultimate surface protection against
environmental elements and everyday wear and tear. PVD matches clear coated finishes in appearance, yet surpasses them in
durability. Yale warrants all its PVD finishes against corrosion, tarnish, wear, discoloring and peeling for the lifetime of the part to
which it has been applied. Ask your sales representative for specific warranty information.
FINISH CARE
5300LN Cylindrical Locks are designed to provide the highest standard of product quality and performance. Care should be taken
to ensure a long-lasting finish. When cleaning is required, use a soft damp cloth. Using lacquer thinners, caustic soaps, abrasive
cleaners or polishes could damage the coating and result in tarnishing.
Yale 5300LN Cylindrical locks are manufactured to be maintenance free under normal operating conditions and environments.
Subjection to extremely heavy traffic and/or particularly dusty and dirty environmental conditions, however, may eventually cause
unsatisfactory operation due to slow moving parts or sticking cylinders. In this case, it may be necessary to clean and re-lubricate
the lockset to maintain optimum performance. To clean the lockset mechanism, use a penetrating or solvent type lubricant to
loosen sticking components, then lubricate with lithium grease. To free sticking or jammed cylinders, lubricate with graphite or a
non-oily lubricant (such as Lock-EZE). Do not use petroleum-based lubricants in the cylinder keyway.
FINISHES
FINISH CHARTMAINTENANCE

September 2003
TABLE OF CONTENTS
Page 3
5300LN Series Parts & Service Manual
Lockbody Assemblies (by Function)
Function ANSI Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
5301LN F75 Passage or Closet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
5302LN F76 Privacy, Bedroom or Bathroom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
5303LN F77 Patio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
5305LN F86 Storeroom or Closet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
5307LN F81/F82 Entrance or Office . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
5308LN F84 Classroom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5321LN F80 Communicating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
5322LN F90 Dormitory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
5328LN - Passage Lever x Blank Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
5329LN - Keyed Lever x Blank Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Lever/Rose Assemblies
Outside Rose Assembly (Standard Cylinder)
Used on Functions 5303LN, 5305LN, 5307LN,
5308LN, 5321LN, 5322LN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Inside Rose Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Lever & Rose Assembly (Removable Core)
Used on Functions 5305LN, 5307LN,
5308LN, 5322LN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Accessories
Lever Designs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17
Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Latchbolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Installation Instructions
Lockset Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-21
Cylinder and Lever Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Removing Cylinder Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Adjusting for Door Thickness for 5328LN/5329LN
Functions Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Dummy Trim Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Strike Installation (Wood Frames Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

September 2003
5301LN
Page 4 5300LN Series Parts & Service Manual
1.1 Flange (Standard Door) 2 -
1.2 Flange (Thick Door) - 2
2Spindle - Inside 2 2
3Frame 11
4Spring - Retractor 2 2
5.1 Locator, Retractor Spring 1 1
6.1 Retractor #1 1 1
ITEM DESCRIPTION DOOR DOOR
1.2
1.1
24
5.1
6.1
3
2
1.1
1.2
Sold as complete lockbody
assembly only.
Passage Lockset F75
Assembly #
*14-5301-0701-048
1-3/8" to 1-3/4"
Assembly #
*14-5301-0702-048
2" to 2-1/4"
QUANTITY

5302LN/5303LN
Page 5
5300LN Series Parts & Service Manual
1.2
1.1
7
11.1
8910.1
4
5.2
6.2
312
2
13
15
14
17
16
1.2
1.1
Sold as complete lock-
body assembly only.
Privacy Lock F76 Patio Lock F77
1.1 Flange (Standard Door) 2 -
1.2 Flange (Thick Door) - 2
2Spindle - Inside 1 1
3Frame 11
4Spring - Retractor 2 2
5.2 Catch 1 1
6.2 Retractor #2 1 1
7Spindle, Outside 1 1
8Seat, Spring 1 1
9Spring, Pawl 1 1
10.1 Pawl 1 1
11.1 Tube, Release 1 1
12 Stem Assembly 1 1
13 Bank, Spring 1 1
14 Spring, Stem 1 1
15 Washer, Connecting 1 1
16 Speed Clip 1 1
17 Adjusting Tube 1 1
ITEM DESCRIPTION DOOR DOOR
Assembly #
*14-5302-0702-048
1-3/8" to 1-3/4"
Assembly #
*14-5302-0703-048
2" to 2-1/4"
QUANTITY
August 2003

September 2003
5305LN
Page 6 5300LN Series Parts & Service Manual
1.2
1.1
or
8910.1
4
3
1.21.1 or
7
24
5.2
6.2
2
11.2
Sold as complete lockbody
assembly only.
Storeroom Lockset F86
1.1 Flange (Standard Door) 2 -
1.2 Flange (Thick Door) - 2
2Spindle - Inside 1 1
3Frame 11
4Spring - Retractor 2 2
5.2 Catch 1 1
6.2 Retractor #2 1 1
7Spindle, Outside 1 1
8Seat, Spring 1 1
9Spring, Pawl 1 1
10.1 Pawl, Modified 1 1
11.2 Tube, Release 1 1
ITEM DESCRIPTION DOOR DOOR
Assembly #
*14-5305-0079-048
1-3/8" to 1-3/4"
Assembly #
*14-5305-0080-048
2" to 2-1/4"
QUANTITY

September 2003
5307LN
Page 7
5300LN Series Parts & Service Manual
1.2
1.1
or
7
11.2
8910.1
4
5.2
6.2
312
213 15
14
17
16
1.21.1 or
Sold as complete lockbody
assembly only.
Entrance Lock F81/82
1.1 Flange (Standard Door) 2 -
1.2 Flange (Thick Door) - 2
2Spindle - Inside 1 1
3Frame 11
4Spring - Retractor 2 2
5.2 Catch 1 1
6.2 Retractor #2 1 1
7Spindle, Outside 1 1
8Seat, Spring 1 1
9Spring, Pawl 1 1
10.1 Pawl 1 1
11.2 Tube, Release 1 1
12 Stem Assembly 1 1
13 Bank, Spring 1 1
14 Spring, Stem 1 1
15 Washer, Connecting 1 1
16 Speed Clip 1 1
17 Adjusting Tube 1 1
ITEM DESCRIPTION DOOR DOOR
Assembly #
*14-5307-0701-048
1-3/8" to 1-3/4"
Assembly #
*14-5307-0702-048
2" to 2-1/4"
QUANTITY

5308LN
Page 8 5300LN Series Parts & Service Manual
1.2
1.1
8910.1 19 20
7
18
4
5.1 6.1
21
3
2
1.1
1.2
Sold as complete lockbody
assembly only.
Classroom Lock F84
1.1 Flange (Standard Door) 2 -
1.2 Flange (For 2” to 2-1/4” Door) - 2
2Spindle - Inside 1 1
3Frame 11
4Spring - Retractor 2 2
5.1 Locator, Retractor Spring 1 1
6.1 Retractor #1 1 1
7Spindle, Outside 1 1
8Seat, Spring 1 1
9Spring, Pawl 1 1
10.1 Pawl 1 1
18 Release Tube 1 1
19 Stop Pin 1 1
20 Cam Tube Driver 1 1
21 Cam Tube 1 1
ITEM DESCRIPTION DOOR DOOR
Assembly #
*14-5308-0064-048
1-3/8" to 1-3/4"
Assembly #
*14-5308-0065-048
2" to 2-1/4"
QUANTITY
August 2003

September 2003
5321LN
Page 9
5300LN Series Parts & Service Manual
1.2
1.1
8910.1 19 20 21
3
7
18 45.1 6.1
20
21
19
18 2
1.1
1.2
8
9
10.1
Communicating Lock F80
Sold as complete lock-
body assembly only.
1.1 Flange (Standard Door) 2 -
1.2 Flange (Thick Door) - 2
2Spindle - Inside 1 1
3Frame 11
4Spring - Retractor 2 2
5.1 Locator, Retractor Spring 1 1
6.1 Retractor #1 1 1
7Spindle, Outside 1 1
8Seat, Spring 2 2
9Spring, Pawl 2 2
10.1 Pawl 2 2
18 Release Tube 2 2
19 Stop Pin 2 2
20 Cam Tube Driver 2 2
21 Cam Tube 2 2
ITEM DESCRIPTION DOOR DOOR
Assembly #
*14-5321-0001-048
1-3/8" to 1-3/4"
Assembly #
*14-5321-0002-048
2" to 2-1/4"
QUANTITY

5322LN
Page 10 5300LN Series Parts & Service Manual
6.2
5.2
17.2
4
1.2
1.18910.1
3
19
213 14 15 17 1.2
16
1.1
or
or
12
Dormitory Lock F90
Sold as complete lock-
body assembly only.
1.1 Flange (Standard Door) 2 -
1.2 Flange (Thick Door) - 2
2Spindle - Inside 1 1
3Frame 11
4Spring - Retractor 2 2
5.2 Catch 1 1
6.2 Retractor #2 1 1
8Seat, Spring 1 1
9Spring, Pawl 1 1
10.1 Pawl 1 1
12 Stem Assembly 1 1
13 Bank, Spring 1 1
14 Spring, Stem 1 1
15 Washer, Connecting 1 1
16 Speed Clip 1 1
17 Adjusting Tube 1 1
17.2 Spindle Assembly, Outside 1 1
19 Stop Pin 1 1
ITEM DESCRIPTION DOOR DOOR
Assembly #
*14-5322-0901-048
1-3/8" to 1-3/4"
Assembly #
*14-5322-0902-048
2" to 2-1/4"
QUANTITY
August 2003

September 2003 Page 11
5300LN Series Parts & Service Manual
5328LN
22
4
5.1
6.1
3
2
1.1
1.2
Sold as complete lockbody
assembly only.
Passage Lock
Lever x Blank Plate
1.1 Flange (Standard Door) 1 -
1.2 Flange (Thick Door) - 1
2Spindle - Inside 1 1
3Frame 11
4Spring - Retractor 2 2
5.1 Locator, Retractor Spring 1 1
6.1 Retractor #1 1 1
22 Flange Assembly, Outside 1 1
ITEM DESCRIPTION DOOR DOOR
Assembly #
*14-5328-0001-048
1-3/8" to 1-3/4"
Assembly #
*14-5328-0002-048
2" to 2-1/4"
QUANTITY

5329LN
Page 12 5300LN Series Parts & Service Manual
1.11.2
or
8
9
10.1
18
20
21
7
19
3
22
6.1
5.1
4
Keyed
Lever x Blank Plate Sold as complete lockbody
assembly only.
1.1 Flange (Standard Door) 1 -
1.2 Flange (Thick Door) - 1
3Frame 11
4Spring - Retractor 2 2
5.1 Locator, Retractor Spring 1 1
6.1 Retractor #1 1 1
7Spindle, Outside 1 1
8Seat, Spring 1 1
9Spring, Pawl 1 1
10.1 Pawl 1 1
18 Release Tube 1 1
19 Stop Pin 1 1
20 Cam Tube Driver 1 1
21 Cam Tube 1 1
22 Flange Assembly, Outside 1 1
ITEM DESCRIPTION DOOR DOOR
Assembly #
*14-5329-0001-048
1-3/8" to 1-3/4"
Assembly #
*14-5329-0002-048
2" to 2-1/4"
QUANTITY
August 2003

September 2003
OUTSIDE ROSE ASSEMBLY
Page 13
5300LN Series Parts & Service Manual
3
2
7
9
4
510
6
8
1
12
114-5303-1058 Retainer Spring 1 1 1
214-5303-1065 Outside Retainer Plate 1
3Outside Shank 1
4Rose Support 1 1 1
5Outside Stop Plate 1
614-5300-1021 Torsion Spring 1 1
7Inside Shank 1 1
881-3812-0407 Screw, #8-32, UNC-2B x 11/32 PFHMS 3 2 2
914-5303-1165 Inside Retainer Plate 1 1
10 Inside Stop Plate 1 1
12 Outside Rose Plate 1 1 1
5303LN, 5321LN
5305LN, 5322LN
355LN 5301LN 5307LN, 5308LN
Assembly# Assembly# Assembly#
14-0355-0003 14-5301-0706 14-5303-0001
ITEM PART NO. DESCRIPTION QUANTITY QUANTITY QUANTITY

INSIDE ROSE ASSEMBLY
Page 14 5300LN Series Parts & Service Manual
114-5303-1058 Retainer Spring 1 1
214-5303-1065 Outside Retainer Plate 1
3Outside Shank 1
4Rose Support 1 1
5Outside Stop Plate 1
614-5300-1021 Torsion Spring 1 1
7Inside Shank 1
881-3812-0407 Screw, #8-32, UNC-2B x 11/32 PFHMS 2 2
914-5303-1165 Inside Retainer Plate 1
10 Inside Stop Plate 1
11 14-5301-1911 Inside Rose Plate 1 1
13 14-5402-0901-FIN Pushbutton Assembly (Specify Finish, See Page 2)
14 14-5407-0901-FIN Turnbutton Assembly (Specify Finish, See Page 2)
ITEM PART NO. DESCRIPTION QUANTITY QUANTITY
All other functions
Assembly#
14-5301-0705
3
2
7
9
4
510
6
11
8
1
Used on 5307LN
Used on 5302LN, 5303LN and 5322LN
14
13
5321LN, 5329LN
Assembly#
14-5321-0003
August 2003

September 2003
LEVER & ROSE ASSEMBLY (REMOVABLE CORE)
Page 15
5300LN Series Parts & Service Manual
AU-Augusta
MO-Monroe
PB-Pacific Beach
Used on Functions 5305LN, 5307LN, 5308LN, and 5322LN
Rose/Handle Assy
Part Number Outside Handle Core Style Door Thickness
14-5305-0006-FIN AU Yale®RC 1-3/4
14-5305-0010-FIN PB Yale®RC 1-3/4
14-5305-0014-FIN MO Yale®RC 1-3/4
14-5305-0018-FIN AU Yale®RC 2-1/4
14-5305-0022-FIN PB Yale®RC 2-1/4
14-5305-0026-FIN MO Yale®RC 2-1/4
14-5305-0007-FIN AU Corbin RC 1-3/4
14-5305-0011-FIN PB Corbin RC 1-3/4
14-5305-0015-FIN MO Corbin RC 1-3/4
14-5305-0019-FIN AU Corbin RC 2-1/4
14-5305-0023-FIN PB Corbin RC 2-1/4
14-5305-0027-FIN MO Corbin RC 2-1/4
14-5305-0008-FIN AU Best®RC 1-3/4
14-5305-0012-FIN PB Best®RC 1-3/4
14-5305-0016-FIN MO Best®RC 1-3/4
14-5305-0020-FIN AU Best®RC 2-1/4
14-5305-0024-FIN PB Best®RC 2-1/4
14-5305-0028-FIN MO Best®RC 2-1/4
14-5305-0009-FIN AU Schlage®RC 1-3/4
14-5305-0013-FIN PB Schlage®RC 1-3/4
14-5305-0021-FIN AU Schlage®RC 2-1/4
14-5305-0025-FIN PB Schlage®RC 2-1/4
14-5305-0129-FIN AU Medeco®/ASSA®1-3/4
14-5305-0130-FIN AU Medeco®/ASSA®2-1/4

LEVER DESIGNS
Page 16 5300LN Series Parts & Service Manual
Cylinder/Button 14-5300-6039-FIN* 14-5305-6056-FIN* 14-5305-6054-FIN*
Emergency Key Hole 14-5302-6058-FIN* 14-5302-6585-FIN* 14-5302-6062-FIN*
Plain 14-5301-6040-FIN* 14-5301-6902-FIN* 14-5301-6054-FIN*
Plain (Patio Function) 14-5303-6060-FIN* 14-5303-6067-FIN* 14-5303-6066-FIN*
*See chart on Page 2 for 3-digit designation for finish required.
AU MO PB
3-1/2"
(89mm)
5"
(127mm)
3-1/2"
(89mm)
Part Number (Lever Only)
Conventional 6-Pin 1-3/8” - 1-3/4” door 1802 1210
Conventional 6-Pin 2” - 2-1/4” door 1802L 1210
High Security 6-Pin 1-3/8” - 1-3/4” door 5802 5210
High Security 6-Pin 2” - 2-1/4” door 5802L 5210
*Specify keyway and finish, see Page 2.
**The 1802 cylinder requires an adapter sleeve to fit in the 5300LN lockset.
Application List No.* List No.*
Augusta
Lever: Cast Solid
Rose: Wrought
brass or
bronze
AU
3-1/2"
(89mm)
5-1/2"
(140mm)
3-1/2"
(89mm)
Pacific Beach
Lever: Cast Solid
Rose: Wrought
brass or
bronze
PB
3-1/2"
(89mm)
4-5/8"
(117mm)
3-1/2"
(89mm)
Monroe Lever: Cast Solid
Rose: Wrought
brass or
bronze
MO
** 9078 Cylinder Sleeve
CYLINDERS & REMOVABLE CORES
Cylinders and removable cores are
constructed of brass and come
with two brass or nickel-silver keys.
Standard Cylinder Removable Core
August 2003

September 2003
CYLINDERS
Page 17
5300LN Series Parts & Service Manual
196-0000-2154-x FIN* x Keyway Plug (6-Pin)
214-1801-2021-000 Shell (6-Pin)
399-9999-4561-999 Plug Retainer
499-9999-3919-999 Roll Pin
514-5407-1039-049 (1802) Connecting Bar
614-5305-1060-048 (1802L) Connecting Bar
ITEM PART NO. TYPE
*See Page 2 for finish.
5
2
1
3
4
6
or
Yale®Standard Cylinder (1802) (1802L)
Compatibility* with Competitive Standard Cylinders
Schlage®Conventional & Primus (1-3/4” door) 108S 14-5305-0090-048
Schlage®Conventional & Primus (2-1/4” door) 108SL 14-5305-0091-048
*Adapter Kits that modify Schlage cylinder to fit 5300LN (cylinder not included).
For Yale®brand IC core cylinders, refer to Page 16.
Competitive Cylinder List No. Part No.
Cylinders with Competitive Keyways*
Schlage®C Keyway (0-bitted) 2802 14-5305-0088-004 606
14-5305-0088-025 626
Schlage®C Keyway (keyed random) 2802 14-5305-0108-0004 606
14-5305-0108-025 626
Sargent®LA Keyway (0-bitted only) 3802 14-5305-0089-004 606
14-5305-0089-025 626
Sargent®LA Keyway (keyed random) 3802 14-5305-0109-004 606
14-5305-0109-025 626
*Includes cylinder.
Competitive Cylinder List No. Part No. Finish

STRIKES
Page 18 5300LN Series Parts & Service Manual
Square
Corners
Full Lip Strike
With full lip anti-rattle tab.
List No. 70S
1-5/8"
(41)
1-5/8"
(41)
2-1/4"
(57)
2-1/4"
(57)
3/8"
(10)
3/8"
(10)
1-3/4"
(44)
1-3/4"
(44)
1-1/4"
(44)
1-1/4"
(44)
Lip
Lip
1/4"
Radius Corners
(25mm)
Full Lip Strike
1/4 Radius Corners
Similar in dimensions and function to the
70S Strike but with radius corners for easy
mortising by power tools. Anti-rattle tab.
List No. 71S
4-7/8"
(124)
ANSI Wrought Box Strike
Available to special order.
Specify 497 x 202.
List No. 202
1-1/4"
(32)
4-7/8"
(124)
1-1/8"
(29)
4-1/8"
(105)
3-3/8"
(86)
3/32"
(2) FOR (2)
No. 12 SCREWS
Lip Only
ASA Blank
Available to special order. Installed in frame
with standard ANSI A115.2 preparation to
replace the strike when the lockset has been
removed from the door.
List No. 497B
Attaching Screws:
Order Screw Pack 81-2012-416 by finish.
Attaching Screws:
Order Screw Pack 81-2012-416 by finish.
1-1/4"
(32)
4-7/8"
(124)
1-1/4"
(32)
4-1/8"
(105)
3-3/8"
(86)
3/32"
(2) FOR (2)
No. 12 SCREWS
Lip Only
1/4"
(6)
C
L
Standard ANSI
Curved Lip Strike
For door and frames with ANSI A115.2
preparations.
List No. 497
Attaching Screws:
Order Screw Pack 81-2012-0620 by finish.
Attaching Screws:
Order Screw Pack 81-2012-0620 by finish.
1-1/2"
(38)
1-1/8"
(38)
2-1/8"
(54)
2-3/4"
(70)
1"(25)
1-1/4"(32)
1-1/2" (38)
1-3/4" (44)
2" (51)
1/4"
(6)
3/32"
(2) LATCH CENTER
STRIKE CENTER
5/8"
(16)
T-Strike
This strike will accommodate frames for
1-3/8" (35mm) to 1-3/4" (44mm) thick doors.
Strikes with other lip dimensions shown are
available to special order.
Supplied with Wrought Strike Box Part.
List No. 371
Attaching Screws:
Order Screw Pack 81-2012-416 by finish.
August 2003

September 2003
LATCHBOLTS
Page 19
5300LN Series Parts & Service Manual
378N Universal 1” (25mm) 2-3/8” (60mm) 7/8” (22mm)
380BN (Std.) Universal 1-1/8” (29mm) 2-3/4” (70mm) 1” (25mm)*
3380BN Universal 1-1/8” (29mm) 3-3/4” (95mm) 1” (25mm)*
List No. Front “W” Front Width Backset Latch Diameter
Plain Latchbolts
Deadlocking Latchbolts
"W"
2-1/4"
(57)
"W"
2-1/4"
(57)
380N Universal 1” (25mm) 2-3/8” (60mm) 7/8” (22mm)
380AN (Std.) Universal 1-1/8” (29mm) 2-3/4” (70mm) 1” (25mm)*
3380AN Universal 1-1/8” (29mm) 3-3/4” (95mm) 1” (25mm)*
List No. Front “W” Front Width Backset Latch Diameter
Backset Extension Links
5” 378N/380N 381N 2-3/8” (60mm) 7/8” (22mm)**
5” 380AN/380BN 381AN 2-3/4” (70mm) 1” (25mm)*
Backset Order Extension
Desired Latchbolt List Number Backset Latch Diameter
*2-3/4” & 3-3/4” backset latches have a 7/8” diameter with a 1/8” sleeve to accommodate 1” door preps.
All latches have universal fronts, so they fit flat and beveled door fronts.When ordering latchbolts,
specify part Number x Finish (e.g., 380AN x 626). Available in 606, 612, 613, and 626.
**Add sleeve (P/N 14-0378-9001-999) if door is already prepped for 1” diameter hole.

INSTALLATION INSTRUCTIONS
Page 20 5300LN Series Parts & Service Manual
Cylindrical
5300LN Series
Lockset
IMPORTANT: The accuracy of the door preparation is critical for the proper functioning and security of this lever handle
lock.Misalignment can cause premature wear and tear and a lessening of security.
1. Mark door. 4. Unpack lock.
Mark horizontal line across
edge of door.40-5/16"
(1024mm) is the usual
height above the floor.Fold
template over edge of door,
centering on horizontal line.
Mark centers of holes at
proper backset.
2. Drill door.
A. Drill 2-1/8" (54mm) dia. hole
thru door.
B. Drill 1" (25mm) hole in edge
of door.
C. Drill two (2) 5/16" (8mm) dia.
holes through door.
D. Drill pilot holes for latch
screws. 7/64" (2.5mm) dia.
Cut notches as
shown on template.
See note.(Except Dummy
Trim)
Mortise for latch front
1-1/8" (29mm) wide x 2-1/4"
(57mm) high x 5/32
.(Except Dummy Trim)
See
note.
(Except Dummy Trim)
" (4mm)
deep
A. Remove the lock components from the box.
Template
3. Install latch unit.
Insert latch unit in door.
(Be sure beveled edge of bolt faces
strike plate.) Attach with two screws
supplied.
Installation of 5300LN cylindrical locks and latches must
be through-bolted in all doors.
If installation instructions are not followed this may result
in damage to the lock and void the factory warranty.
Attention Installer
Y
ale
Rose Scalp
Inside Lever Handle
Inside Rose Assembly
B
C
A
D
Tools Required
• 2-1/8" (54mm) hole saw
• 1" (25.4mm) boring bit
• 5/16" (8mm) drill bit
• 7/64" (2.5mm) drill bit
• Chisel & hammer
• #2 phillips screwdriver
• Handle removal tool (supplied)
• 3/8" or 1/2" drill
Outside Assembly
(stays assembled)
NOTE:
To avoid splintering wood
doors, drill holes (A) and (C)
from both sides of the door.
*Be sure to verify backset before
marking & drilling door.Through Bolts
August 2003