Assa Abloy 841C User manual

Instruktiontill841C,840C,850Coch851C

Dörrlägessensornsplacering
Dörrlägessensornärplaceradunderdatummärkningenpåstolpen.På50dornovanför
regelnoch35‐dornunderregeln.
Instruktionförattvändafall840C‐50och850C‐50

1. Monterabortskruvarna.(passandebitsärT20).Lyftbortlåsstolpen
2. Varförsiktighylsornaochstiftetkanlossna.
3. Demonteraplastbitenöverfallkolven.
4. Vridfallen.
5. Monteraplastbitenöverfallkolven.
6. Monterahylsornaochstiftet.
7. Monteralåsstolpen.
8. Monteraskruvarna.

Switchochlysdiodsplacering

Förklaringtilllysdioden
Fastsken=Oinitierad
Släck=Initierad
Blink2Hz(blinkning)=Initieradmotannan
DAC
Blink20Hz(flimmrar)=Timeoutvänta360sek
innanupplåsning.

Instructionto841C,840C,850Cand851C
Placementofdoormonitor
Theplacementofthedoormonitorisunderthedatemarkontheforend.
50‐backsetisabovethehookbolt
35‐backsetisunderthehookbolt.
Instructiontochangethelatchbolt

1. Unmountthescrews(TorxT20).
2. Becarefulthepinandsocketcanfallout
3. Unmounttheplastic.
4. Turnthelatchbolt
5. Assemblytheplastic
6. Assemblythepinandsocket.
7. Assemblytheforend.
8. Assemblythescrews(TorxT20).
PlacementofswitchandLED


ExplanitionforLED
Steadylight=Factorymode,notinitiated
LEDoff=Initiated
FlashingLED(2Hz)=“WrongDAC”lockalready
initiatedagainstanotherDAC.
FlashingLED(10Hz)=Timeoutwait240sec(4min)
theninitiateDACorresetthelock.Seethequick
guide.