Assa Abloy Sargent Signature Series User manual

Signature
®Series
Copyright © 2007, 2009 - 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

1-800-727-5477 • www.sargentlock.com
Signature®Series
90105:D: 11/15/11 Copyright © 2007, 2009 - 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Table of Contents
Page
Signature®Features and KeyWizard™Software.................................................................................... 1
Signature Components................................................................................................................................. 2
UL437 Mortise & Rim Cylinders................................................................................................................. 3
Bored Locks Cylinders.................................................................................................................................... 4
10-6300 LFIC Cylinders and 6300 Series Tools.................................................................................... 5
Key Blanks .......................................................................................................................................................... 6
Visual Key Control........................................................................................................................................... 7
Keyway Control................................................................................................................................................ 8
Construction Master Keying........................................................................................................................ 9
Registration Forms........................................................................................................................................10
How to Order/Special Features................................................................................................................11
Policy
The SARGENT®Signature®patented cylinders and keys are available through the normal
channels of distribution.
Assignment of unique SARGENT Signature patterns must be pre-approved by the factory.
A letter requesting a SARGENT Code Pattern Registration Form must be sent to the Key Records
Department in New Haven, CT.
Signature patterns will be issued by predefined geographical boundaries and assigned in
accordance with a standard factory policy. This policy would not reuse the same key way
with the same Signature dimple pattern in the same state or adjacent states providing a large
area of exclusivity. For example a system in Connecticut would not be reused in New York,
Massachusetts and Rhode Island.
A letter of authorization under the letterhead of the End-User must accompany any purchase
orders for any products which involve SARGENT’s Signature cylinders and or keys.
SARGENT Signature patterns are assigned at the End-User level.
Pyramid. Cylinder & Key Control Products
* See product catalogs for more information
Absolute
Control
Keso F1 & ASSA®V-1 UL 437
High Security Cylinder
Extra
Control
Signature Series & Signature
with UL 437 High Security
Keso,
Restricted Keyways Intermediate
Control
XC Patented Cylinder
Conventional Cylinders Limited
Control

1
1-800-727-5477 • www.sargentlock.com
Signature® Features and
KeyWizard™ Software
Signature®Series
90105:D: 11/15/11 Copyright © 2007, 2009 - 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
SARGENT’s KeyWizard™5.5 Software Package Tracks Multiple Key Systems Including Keys, Keyholders, Locations and Hardware Information
This comprehensive key management software package was developed for locksmiths and end-users to track detailed information.
The program features easy to navigate, non-cluttered screens and uses a format similar to Microsoft®Outlook™.
Features:
 • FreeTechnicalSupport1-800-610-1706andsystemupgradesfor1year
 • Websitesupportatwww.keywizard.net
 • Multi-levelpasswordsandaccesslevels
 • Clear,easytoreadscreens
 • Managesmultipleenduserkeysystems
 • Customizedquery,reporting,andsearchcapability
 • Globalsearchingacrossmultiplekeysystems
 • Comprehensivehardwareschedules
 • Keyholderphotosandsignaturesforidentityverification
 • Scheduledmaintenanceandremindersforoverduekeysandback-ups
 • Accuratekeysymbolsorting
 • Multi-levelkeyauthorizationsandkeydeposits
 • Networkandstand-aloneversions
 • Pinningcalculators
 • Reportsoptionsincludingprintinginavarietyofformatsande-mail
 • CylinderandkeyrandomserialIDgenerator
 • Keyauthorizationformsthatcanbeprintedatwill
 • Editablefieldtitles
 • Abilitytoconnecttoawebsiteandsearchforanyupdates
Computer System Recommendations:
REQUIRED:
 • 350MHzprocessor
 • 60MBharddiskspace
 • Windows®7, Vista, XP, NT, ME, 2000 or 98
 • 64MBRam
 • CDdrive
How to Order: ................................................ Part Number
Single License Version............................................ KW-SS1
Network Version....................................................... KW-SSN1
Demonstration Version ......................................... KW-DEMO1
KeyWizard CD with new masterkey system
(when purchased with hardware) .................... DLKW1
KeyWizard CD
with existing key systems*.................................... DLKW2
KeyWizard replacement for KeyMinder
(Consult factory for eligibility requirements)
Single License Version............................................ UP-KW-SS1
Network Version....................................................... UP-KW-SSN1
* Please consult factory for the availability of existing
systems for use with KeyWizard.
By SARGENT®
RECOMMENDED For Better Performance:
• 500MHzorfaster
• 70MBormore
• Windows®7, Vista, XP, NT, ME, 2000 or 98
• 64MBRam
• CDdrive

21-800-727-5477 • www.sargentlock.com
Signature Components
Signature®Series
90105:D: 11/15/11 Copyright © 2007, 2009 - 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
1
2
3
4
5
Top Loading
Key Blank
Standard key bitting can be
accomplished in the field with any
industry standard duplicating or code
cutting machine.
1
Signature Barrel (Plug)
Unique Signature pattern code pins
factory loaded. Field servicing not
required.
2
Signature Body
Grooved to function with offset blocking
bar assemblies.
3
Signature Offset Blocking Bar
(2) Two per cylinder.
Locks out all but correctly dimpled and
bitted keys.
45
The Signature key system consists of a 6 pin cylinder with 2 added blocking bars with shear lines (item 4) which work in conjunction with
6 factory loaded side pins. The side pins depths and locations vary and only work with a corresponding dimpled key.
In addition, two “blocking pins” for a total of 8 are in each plug/barrel. These blocking pins prohibit non Signature keys from being inserted
into the Signature cylinder. Signature keys can operate non-Signature cylinders.
These pins are factory installed and do not need to be serviced.
The Signature key system is ideal for existing facilities that would like to upgrade to a Patented key system with minimal effort.
Signature can easily blended into most existing key systems while allowing the end user one master key that will open both Signature and
non-Signature cylinders.
US Patent # 5,475,998
Signature Offset Blocking Bar Springs
(4) Four per cylinder.
Two per offset blocking bar. Supplies
required spring force to prevent
compromise of offset blocking bars by
anything other than a correctly dimpled
and bitted key.

3
1-800-727-5477 • www.sargentlock.com
UL437 Mortise & Rim Cylinders
Signature®Series
90105:D: 11/15/11 Copyright © 2007, 2009 - 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Note: Parts on this page reflect only those that are unique to the Signature feature.
For all other cylinder components, refer to the standard cylinder section.
Only the Signature cylinders listed on this page are offered in higher security UL 437 version.
Only Signature Mortise or Rim cylinders are available with the UL option which provides the highest
level of security and is underwritten by Underwriters Laboratories UL 437 standards.
Note: UL437 is not available with 21-, 63-, 78- or LE3 & LE4 mortise trims
Example order for a UL437 Signature Mortise Cylinder is specified: 10-UL-41 x 26D x key set
Mortise/Rim Cylinders
Cams for use with 40 Series
* When cylinders are ordered (without hardware), they are packed with #97 rosette as
standard. Others available, consult Product Catalogs for optional collars.
** Cylinders offered in the following finishes: US 3, 4, 9, 10, 10B, 10BL, 14, 15, 20D, 26, 26D,
32 and 32D.
*** Barrels offered in US 4 and 15 only
Cam Type Suffix Part
Number
SARGENT Std
Cam
No Suffix 13-0664
ADAMS RITE
(1850)
-101 13-0512
ADAMS RITE
(4070)
-104 13-0513
Inside Cam for
16 & 92
function
Mortsie
Locks
-105 13-0665
Schlage L
-106 13-0938
OPEN
-112 13-0097
SARGENT
(4370)
-113 13-0921
Cam Screws 2 required 01-1121
Sargent offers the Signature Series Mortise and Rim Cylinders with the UL 437 option. UL 437 sets the standard for both drilling and picking resistances.
These cylinders are manufactured to include hardened drill resistant inserts in both the plug/barrel and body along with 6 stainless spool drivers.
UL 437 High Security Signature Cylinders are recommended for doors most likely to be physical assaulted, while the use of standard Signature Cylinders
is more advantageous and less costly for interior doors. Use the 10-UL prefix when required for this option.
The UL cylinders complement Anti Vandal and Security escutcheons offered with our 8200 Series Mortise Locks and 80 Series Exits Devices.
Top Loading of
Cylinders allows for
easier field pinning
(since May 2008)
UL 437 Listed Cylinders
Complete 6 Pin
Assembly ** Barrel*** Body & Slide
Assembly Cylinder Length
40 Series*
Cylinder
10-41 13-3835 13-3726 1-1/8"
10-42 13-3836 13-3727 1-1/4"
10-43 13-3837 13-3728 1-3/8"
10-44 13-3838 13-3729 1-1/2"
10-46 13-3839 13-3730 1-3/4"
10-48 13-3840 13-3731 2"
10-50 13-3841 13-3732 2-1/4"
10-52 13-3842 13-3733 2-1/2"
10-54 13-3843 13-3734 2-3/4"
10-56 13-3844 13-3735 3"
Rim Cylinder* 10-34 13-3845 13-3847

41-800-727-5477 • www.sargentlock.com
Bored Locks Cylinders
Signature®Series
90105:D: 11/15/11 Copyright © 2007, 2009 - 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Functions Lockset Assembly Barrel Body & Slide
Assembly #1 #2
All except 50 function 11 Line 10-C11-1 (13-4147) 13-3851 13-3710
All except 50 function 10, 8L, 7 Lever,
6500 10-C10-1 (13-3713) 13-3851 13-3710
All except 50 function 9, 8 10-C8-1 (13-3827) 13-3850 13-3852
All except 50 function 6 “S”,”N” 10-C6-1 (13-3814) 13-3851 13-3710
All except 50 function 6 “B” 10-C6-1B (13-3815) 13-3851 13-3710
For products not listed, contact factory for availability
Note: Parts on this page reflect only those that are unique to the Signature feature. For all other
cylinder components, refer to the standard cylinder section.
Not Available in UL 437
Cylinders offered in US 4 and 15 only
Bored Locks
Lockset Assembly Barrel #1 Body #2
474, 484 10-C480-1 (13-3857) 13-3849 13-3855
475, 485, 487 10-C480-2 (13-3858) 13-3849 13-3855
486 10-C480-3 (13-3859) 13-3849 13-3855
464 10-C460-1 (13-3861) 13-3849 13-3854
465 10-C460-2 (13-3862) 13-3849 13-3854
Auxiliary Locks (Deadbolts)
1Barrel Assembly
2Body & Slide
Top Loading of Cylinders allows for easier
field pinning (since May 2008)

432 RC Tool for 6300 LFIC (Removable Core)
5
1-800-727-5477 • www.sargentlock.com
10-6300 LFIC Cylinders
and 6300 Series Tools
Signature®Series
90105:D: 11/15/11 Copyright © 2007, 2009 - 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Note: Parts on this page reflect only those that are unique to the Signature feature. For all other
cylinder components, refer to the standard cylinder section.
Note: Cores made prior to March 2006
can be bottom loaded or top loaded with
slide 13-0797, which must be staked.
Note: Not available with the UL option
10-6300 LFIC can be used with:
•The432RCtooltoassistininstallingSARGENTLFIC(RemovableCore)
Mortise Housings. This tool makes it easy to thread a cylinder body into
a Mortise lock and can also be used to check the cylinder function of a
lock before installing the cylinder core.
•Orderas:432RCforthe6300LFIC(Removable)CoreInstallationTool
436-1 Slide Block Kit
 

 


 
 
 
  
  
 
 






437S Signature Keying Kit


 • 
 • 
  
Note: 

10-6300 Cores
Complete Core 10-6300 x finish
#1 Barrel 13-0976
#2 Body Only 13-0977
#3 Sleeve 13-1074
Slide
(Not Shown)
13-0797/
13-1341*
123
Top Loading of Cylinders allows for
easier field pinning (since May 2008)
* Slides for cylinders mfg after 3/06
•10-63-34RimCylinders
•10-63-40SeriesMortiseCylinders(intheseSizes42(1-1/4"),
43 (1-3/8"), 44 (1-1/2") & 46 (1-3/4") (See page 3 for
Cam Types)
•10-63-11Line(T-ZoneLocks)
•10-63-10LineLocks
•10-63-7LineLocks
•10-63-6500Series
•10-63-8&10-63-9
Line Bored Locks
•10-63-758Padlocks
•10-63-858Padlocks
Signature LFIC core cylinders offer a patented cylinder with the convenience of quickly changing cores without lock disassembly.
Consult individual product catalogs for availability.
Ordering examples:
10 Line Cylindrical - 10-63-10G05 LL x 26D x LH key set
8200 Mortise - 10-63-8204 LNL x 26D x RH key set

61-800-727-5477 • www.sargentlock.com
Key Blanks/Cut Master Keys
Signature®Series
90105:D: 11/15/11 Copyright © 2007, 2009 - 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Key bittings can be cut on any industry
standard key cutting machine.
All Signature key blanks are stamped at the
factory with the Quill Logo and the individual
Signature pattern. The Signature key blanks
with the end user’s unique dimple pattern are
available only from SARGENT.
Available Keyways: H, L, R. For other
sections, call factory.
Orders for these key blanks, must be
accompanied by a letter of authorization
under the end user’s letterhead. This letter
must contain the required key section(s) and
appropriate authorizer’s identification
The Signature Key Blank for field cutting and
stamping key is offered in two styles.
Version one: The key blank has the standard
SARGENT logo embossed on one side. The
other side has the Signature Quill Logo, specific
Signature code pattern, keyway and space for
one additional line of stamping such as key set.
Field Service Parts
Blocking Bar packed in quantities of 10
Blocking Bar Spring packed in quantities of 100
Pinning Kit The 437-S pinning kit is for Signature cylinders. (on
previous page) LFIC (Removable) core cylinders
manufactured before January 2009 require the use
of hollow drivers in both the 3rd and 4th chambers
found in Kit 437 RC/UL. (located in the Conventional
Catalog) LFIC (Removable) core cylinders manufactured
after December 2008 use standard drivers and spring
13-1769 in all positions. 10-UL listed cylinders when
re pinned require the use of hardened pins which are
sold separately . The 437RC/UL has space to store these
hardened pins.
Service Tools Refer to Standard Cylinder Section.
No additional service tools required for the
Signature Cylinder.
Cylinder lubricant packaged in convenient 3.0 oz. aerosol can be order by
p/n 18-0070
Blocking Bar (Old Style) 13-0985
Blocking Bar (New Style) 13-1109
Blocking Bar Spring 13-0986
Part Numbers
Part Numbers
Version two: The key is less SARGENT logo.
This allows for additional space for optional
stamping such custom or specific die stamping
or DO NOT DUPLICATE. The other side has the
Signature Quill Logo, specific Signature code
pattern key way and one additional line for
stamping such as key set. Key set symbols or
alternate symbols will be stamped on all master
keyed orders.
Two types of Signature featured key blanks
are available for specific Keyway (sections)
configurations: the day key or single key section,
and the Master Keyway sections.
10-S6275 Day Key x keyway
10-S6270 Master Section x keyway
Note: Sold in boxes of 50 per keyway
For cut master and control keys order by the
following #s:
Master or Grandmaster 10-S6272 MK
Control Key 10-S6272 CTL
Control Key 10-S6255 CTL used with 1 bitted
10-6300 cores

7
1-800-727-5477 • www.sargentlock.com
Visual Key Control
Signature®Series
90105:D: 11/15/11 Copyright © 2007, 2009 - 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Visual Key Control (Stamping)
To allow for easier key and cylinder identification, SARGENT offers the option for permanent stamping of keys and/or cylinder with industry standard
alpha-numeric keyset symbols.
Non-visual key control stamped change (day) keys include bitting numbers as standard, (Item A) unless specified in keying order lead sheet submitted
with order requesting to be omitted and key set substituted.
SFIC and Signature change keys are stamped with key set symbols as standard.
Master level keys do not include bitting numbers. Master level keys include system register numbers stamped on the first line, and
the standard visual key control designations on the second line (Item B).
Up to 7 characters available for permanent stamping for Visual Key Control
• Key and cylinder identified by industry standard alpha-numeric keyset symbols
• Concealed stamping on mortise and rim cylinders and bored lock cylinders available on the slide only (Item D or I )
• Cylinder-slide stamping available on 5100 and 6300 SARGENT LFIC (removable) cores, bored lock, mortise/rim cylinders (Item E, I D)
• Core side engraving available for 7300B Series up to 7 characters (Item F)
• Special key stampings available, such as “DO NOT DUPLICATE” or “CITY OF PHOENIX”
• XC and Signature cylinders not available with visual plug stamping
• XC and Signature cylinders available with only concealed slide stamping (Item D, E and I) only
• Signature LFIC 10-6300 available with cylinder slide stamping (Item E)
NOTE: SARGENT will stamp alternate identity codes whenever requested. If the Visual Key Control stamping is not wanted, an alternate code for
stamping the individual identity of the Master Level Keys can also be substituted.
Tamper Proof Packaging
For the highest level of security for the end user, Tamper Proof Packaging is used on all Master Keys, Signature key blanks and all restricted key blanks.
This heat sealed shrink wrap identified with “SARGENT Sealed For Your Security” provides assurance of the integrity of the factory generated key system.
Item D
SARGENT
AA1
Item E
AA1
SARGENT
SARGENT
PAT. 6,526,791
Item F
Item B
Example
system
number
Example
of keyset
Symbol to
identify
factory-cut
key
Master Level
Key Stamping
Item A
Bittings or
keyset
Keyway
Change (Day)
Key Stamping
Item I

81-800-727-5477 • www.sargentlock.com
Keyway Control
Signature®Series
90105:D: 11/15/11 Copyright © 2007, 2009 - 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Signature vs. Standard Keyway Control
SARGENT Signature keys are produced with a special feature that allows them to operate Signature cylinders as well non-Signature cylinders within the
same keyway family. The standard key does not contain the special feature which allows it to operate a Signature cylinder but will continue to operate
non-Signature cylinders.
Signature key system can be easily blended into most existing facilities using the existing keyways (contact key records), but with the additional feature
that allows operation only with Signature Keys. This prevents unauthorized access with a minimum effort. Typically all exterior cylinders and selected
interior cylinders are upgraded to Signature to immediately stop unauthorized access, while still allowing one master to operate both types of cylinders.