5 (22)
2. Designed purpose of use
The AVANT 4 in 1 buckets are attachments designed and manufactured to suite AVANT multi purpose
loaders shown in Table 1. They are versatile buckets for earth-moving tasks, material handling, levelling and
snow clearing work. The 4 in 1 bucket is equipped with two hydraulic cylinders which open the bucket, making
it possible to use the bucket very efficiently as a dozer blade, leveller or as a grab to pick rocks etc. The
opening feature can also be utilized for emptying the bucket at a higher level. The buckets are available with
straight edge or with teeth.
Various width options are available to best suite each task and loader model. When choosing a bucket, the
intended use of the bucket,and the model of the loader should be considered, as shown in Table 1. If the
loader is fitted with other than standard tyres, or differs from original specifications, consult your Avant dealer
to choose the best bucket.
The attachment has been designed to require as little maintenance as possible. The operator can perform
regular maintenance tasks. All repair work can’t be performed by the operator, and demanding repair and
maintenance operations are to be left for professional maintenance. All maintenance work must be done using
proper safety equipment. Spare parts must be identical with original specifications, which can be ensured by
using only original spare parts. A separate spare parts catalog may be available, consult your Avant dealer.
Familiarise yourself with the manual's instructions regarding service and maintenance. Please contact your
AVANT retailer if you have additional questions about the operation or maintenance of the equipment, or if
you require spare parts or maintenance services.
Compatibility with Avant Loaders
Compatibility recommendations are based on the width of the loader and available lifting capacity. Do not use
too wide bucket when handling heavy loads, as the actual breakout force (bucket tilting capacity) decreases
with wide buckets and the overall performance will decrease. To estimate the lifting capacity of the loader the
Table 5 can be used together with the load diagram shown in the operator’s manual of the loader. When using
with models marked with (), full performance may not be achieved. Additional counterweights may also be
required. For compatibility with a model not shown in table, contact your Avant dealer.
Table 1 - 4 in 1 Bucket - Compatibility with Avant loaders
When using with models marked with (), full performance may not be achieved. Additional counterweights
may also be required. For compatibility with a model not shown in table, contact your Avant dealer.
