Avaya CU-360 User manual

QUICK GUIDE
CU360
AVAYA COLLABORATION UNIT

GOOD CHOICE...
Congratulations on purchasing your Avaya Collaboration Unit CU360.
The CU360 uses unique Avaya next-generation technology to give 󽗊uid,
on-the-go access to cloud applications and video capability—to ensure
collaboration is more meaningful and e󽗈ective than ever before.

Rubber Cap
Avaya CU360 Collaboration Unit Power Adapter
220V and 110V with
regional converters
HDMI Cable 90 degree HDMI
adapter
WHAT’S IN
THE BOX
WHAT’S IN
THE BOX

WHAT’S IN
Remote Control 2 AAA batteriesWall mount
4 screws 4 *40mm
4 plug 6*40mm
1 tripod UNC screw
Please dispose used batteries
at an appropriate recycling
facility or designated drop-o󽗈
site in your community.
WHAT’S IN
THE BOX

CONNECTIONS
Power
Supply
Kensington Security Slot
Micro SD
Card Slot
USB C USB A
EthernetHDMI
On / O󽗈 Button
NFC

Video Privacy: Use the rubber cap to cover the camera for privacy.
1. Place the CU360 above your TV, and use the hinge to secure it.
2. Plug the HDMI cable into the TV and CU360.
3. Plug in the power adapter.
Note: if you are not using WiFi, make sure to connect a LAN / Ethernet cable.
Note: To connect a second display to CU360, please use a quali󽗉ed USB-C to HDMI cable.
Quali󽗉ed cables are described in the User Guide and in the Third Party Accessories list that can
be downloaded from the Support Website. Using a non-quali󽗉ed cable may result in unstable
operation of the CU360.
SETTING UP
THE DEVICE

1. When the CU360 is connected to the TV and your Network, the IP address (X.X.X.X)
is displayed in the top left corner of the screen.
2. Using a device connected to the same network, type http://[IP ADDRESS] into the
web browser.
3. Enter the default user name of Admin and the password 1234.
4. A Con󽗉guration Wizard is initiated (only if the system is not con󽗉gured).
More details about system con󽗉guration can be found in the CU360 User Guide, available at:
support.avaya.com
CONTROLLING
THE CU360: USING THE WEB

CONTROLLING
USING THE REMOTE CONTROL
Power Button
Zoom in
Back
OK button
Zoom out
Audio mute/unmute
Decline Call/Disconnect
Change PiP position
Change layout
Start/Stop recording
Enable/Disable tracking camera
Home
Video mute/unmute
Increase volume
Decrease volume
Control far/near camera
Delete
Mouse
Arrow keys
Call/Accept Call
Start/Stop presentation
(Pan, Tilt, or zoom camera & navigate)
(and USB bar mode toggle)

CONTROLLING
USING THE REMOTE CONTROL
ENTER
BACK
DEL
1 2 3 4 5 6 7 8 9 0
! ? # $ & * )(
_ - + = \
%
: , . [
., :
PG UP ]
“
FN <
/ ;
>HOME ENDPG DWN
CTRL
SHIFT
ESC
CAPS
ALT @
@SPACE
Arrow keys (Pan, Tilt, or Zoom camera and navigate)
Battery cover (push and slide to open)
Function key (enables/disables yellow digits/symbols)
Use The Remote Control
The remote control provided is ready to use.
If this is the 󽗉rst time you are using this remote, just insert the batteries included in the box.

The remote control included is already-paired with your CU360 unit. If you use a di󽗈erent
wireless remote control, or your remote control is not paired, please follow the procedure on the
next page.
PAIRING
THE REMOTE CONTROL

1. Check that there are 2 charged AAA batteries inside the remote control.
2. Unplug the codec unit from power.
3. Press the “Back” key and the “OK” key together until the small blue LED on top of the
remote quickly 󽗊ashes a few times.
4. While the LED light is still 󽗊ashing, plug the power into the device.
Note: You must keep the remote control close to the unit. If the pairing is successful, the
LED stops 󽗊ashing. If the pairing fails, disconnect all the cables from the CU, including USB,
and repeat steps 1-4.
N
PAIRING
THE REMOTE CONTROL

If PoE is needed to power the device, please order a CU360 PoE splitter (700514935) and follow
the instructions in the quick setup guide:
(https://downloads.avaya.com/css/P8/documents/101059640)
POWER OVER
ETHERNET

Quick Tips Guide:
https://downloads.avaya.com/css/P8/documents/101075443
QR CODE
Note: You can 󽗉nd further information about the CU360 on the Avaya Support Site using
the following link.

User Guide:
https://downloads.avaya.com/css/P8/documents/101075445
QR CODE
ACO Guide:
https://downloads.avaya.com/css/P8/documents/101076025

In case the device output image does not 󽗉t with the Monitor screen check the OS menu.
You can activate the Standard Android (OS) Menu bar by moving the mouse pointer at the
bottom of the screen.
Note: The mouse pointer can be activated by pressing the Mouse button on the remote-control.
1. Press the circle on the Navigation bar or the Home button on the remote control
MONITOR
SETTINGS

MONITOR
SETTINGS
2. Swipe-up the little white arrow under Apps Provider icon
3. Click on the Settings icon
4. Browse into Settings > Display > Advanced > HDMI >
Main Screen > Screen Zoom and calibrate the device
output image within the Monitor screen
Note: If an additional monitor is connected, you can calibrate also it.

To add the optional Avaya B109 as a Bluetooth microphone for the Avaya CU360, please follow
these steps:
1. On your Avaya CU360 screen, select
- Enable Con󽗉gure > General > Show Advanced Settings = Yes
- Select Con󽗉gure > Advanced
(default PIN is 1234)
- Select Con󽗉gure > Advanced > System > Security > Settings > Bluetooth
- Turn on the Bluetooth
B109
SETUP

B109
SETUP
2. Hold down for two seconds on the Avaya B109. This makes the B109 visible to CU360.
The icon is displayed on your B109, and the LEDs 󽗊ash blue.
3. In the selected Bluetooth settings window of the CU360, the Avaya B109 appears in the
available devices list. Select the Avaya B109 from the list of devices and select pairing.
After 60 seconds in pairing mode, the B109 returns to normal mode even if pairing is
unsuccessful.
Note: It can take some time for your CU360 to 󽗉nd the B109 device. If the pairing is
successful, the icon is displayed on the B109, and it is listed as “Connected” under the
CU360 Bluetooth Paired Devices.
Note: Pairing and reconnecting can also be achieved using NFC. Simply tap your Avaya
B109 NFC-logo to the CU360 NFC-logo on the upper side.

Read all safety, installation, and user documentation before installing or operating this product.
To view and download safety, installation, and user documentation, go to Avaya support website
at support.avaya.com. Check this site frequently for any updates.
IMPORTANT
NOTICE

Avaya.com