AVer AVerVision F50 User manual

ENGLISH
2
G
Ge et t F Fa am mi il li ia ar r w wi it th h t th he e A AV Ve er rV Vi is si io on n F F5 50 0
(3)
(1)
(5)
(7)
(8)
(4)
(6)
(9)
(2)
(fig. 1.1)
Name
Function
(1) Camera head
Contain the camera sensor.
(2) Camera lens
Focus the image in the camera.
(3) LED light
Provide light to enhance the lighting condition.
(4) Flexible arm
Provide adjustable viewing coverage.
(5) Left panel
Connections for DVI-I external display device, microphone, speaker,
USB flash drive/USB mouse, and USB switch.
(6) Control panel
Easy access to various functions.
(7) IR sensor
Receive remote control commands.
(8) Rear panel
Connections for power, computer, RGB/RCA external display device,
RS-232, and USB to PC.
(9) Right panel
Connections for the camera head holder, SD card, TV-RGB display
output switch, and antitheft Kensington security lock compatible slot.
Right Panel
(4)
(1)
(2)
(3)
(fig. 1.2)
Name
Function
(1) Camera Holder
Hold the camera head for storage.
(2) SD card slot
Insert the SD card with the label facing up.
(3) TV-RGB switch
TV switch to output display video from RS232/CVBS (via RCA
connection), and RGB to RGB OUT and DVI-I OUT ports.
(4) Antitheft Slot
Attach a Kensington compatible security lock or antitheft device.

ENGLISH
3
Rear Panel
(5)
(4)(2)
(1)
(3)
(fig. 1.3)
Name
Function
(1) DC12V
Connect the power adapter into this port.
(2) RGB INPUT port
Input the signal from a computer or other sources and pass it
through to the RGB OUT port only. Connect this port to the
RGB/VGA output port of a computer.
(3) RGB OUTPUT port
Connect the AVerVision F50 to any display device with RGB
cable
(4) RS-232/CVBS port
Connect the supplied RS-232/CVBS cable into this port. The
RCA jack outputs the video signal from the camera to a TV or
video equipment. The RS-232 jack is used to connect to
computer serial port or to any control panel or for centralized
control if desire.
(5) Mini USB port
Connect to a USB port of a computer with a USB cable and use
AVerVision F50 as a USB camera or transfer the captured
images/videos from the memory source to computer.
Left Panel
(5)
(4)
(3)
(2)
(1)
(fig. 1.4)
Name
Function
(1) Speaker port
Connect to an amplified speaker to playback recorded audio &
video clip.
(2) MIC port
Connect a 3.5mm plug microphone. The built-in mic will be
disabled when an external MIC is connected to this port.
(3) USB port
Insert a USB flash drive save the images/video directly from the
USB flash drive or use a USB mouse to annotate.
(4) USB switch
Switch to for audio video recording directly to a USB flash
drive or use a USB mouse to annotate and when connecting
AVerVision F50 to a computer using a USB cable from the rear
USB port.

ENGLISH
4
Name
Function
(5) DVI-I OUTPUT port
Connect theAVerVision F50 to any display device with DVI cable.
If the display device does not support DVI-I, you can only view in
Camera and Playback mode.
Control Panel
OUTPUT
RGB
TV
MENU FREEZE ROTATE CAP/DELLAMP
POWER RECORDING PLAYBACKCAMERA/ PC
AUTO FOCUS
(10)
(1)
(2)
(8)
(9)
(14)
(4)
(15)
(13)
(3)
(11)
(12)
(7)
(5)
(6)
(fig. 1.5)
Name
Function
(1) POWER
Turn the unit on/standby mode.
(2) OUTPUT LED
Indicate TV-RGB switch selection to show which port the video signal
is sent out.
TV indicates that the video signal is sent out thru RS232/CVBS
port via RCA connection.
RGB indicates the video signal is sent out thru RGB OUT and DVI-
I OUT ports.
(3) RECORDING
Start/Stop audio & video recording. Audio and video recording can be
saved on a SD card or an USB Flash drive only. See HUExternal
Memory StorageUH.
(4) USB Switch LED
Indicate the USB switch selection to show which USB port is
activated.
allowing you to use the AVerVision F50 as USB camera or
transfer the captured images/videos from the memory source to
computer.
allowing you to save the images/video in the USB flash drive
or use a USB mouse to annotate.
(5) Shuttle Wheel
- Turn the shuttle wheel clockwise to zoom in and counter-clockwise
to zoom out the image in Camera and Playback mode only.
When it reaches the maximum optical zoom level of about 8X, you
can still continue to AVERZOOM up to 1.25X and 8X digital zoom.
- Press the shuttle wheel ▲,▼,◄, &► to pan the image while in
zoom in mode, to make a selection on 16-thumbnail images or

ENGLISH
5
Name
Function
Shuttle Wheel
move to the next or previous single full screen preview in Playback
mode, or to make a selection and adjustment on the OSD main-
menu and sub-menu (See Menu Functions for more details).
- Use ▲&▼ to increase and decrease the video playback volume.
- Use ◄&► to play the video backward and forward.
- Move the Spotlight frame and Visor screen cover.
(6)
- Make a selection in Playback mode and OSD menu.
- Start/Pause video playback.
(7) FREEZE
- Pause or resume image display in Camera mode.
- Stop audio & video playback in Playback mode.
(8) MENU
Open and exit the OSD menu.
(9) ROTATE
Turn the image by 90° in camera mode only.
(10) CAMERA / PC
Switch the video signal between camera or computer from the RGB
IN port.
(11) PLAYBACK
View & playback captured still images and video files.
(12) AUTO FOCUS
Adjust the focus automatically.
(13) LAMP
Turn the overhead light on/off.
(14) CAP/DEL
- Capture picture in Camera mode. In continuous capture mode,
press this button again to stop.
- Delete the selected picture/video in Playback mode.
(15) Built-in MIC
Record audio when recording video clip. The recorded sound will be
in monophonic.

ENGLISH
10
C
Co on nn ne ec ct t t to o a a M Mo on ni it to or r o or r L LC CD D/ /D DL LP P P Pr ro oj je ec ct to or r
Locate the RGB (VGA) input port of the graphics display device and connect it to RGB
OUT port of AVERVISION F50.
Make sure the TV/RGB switch is set to RGB.
C
Co on nn ne ec ct t t to o a a M Mo on ni it to or r o or r L LC CD D/ /D DL LP P P Pr ro oj je ec ct to or r w wi it th h
D
DV VI I- -I I i in nt te er rf fa ac ce e
Locate the DVI-I input port of the display device and connect it to DVI-I OUT port of
AVerVision F50.
Make sure the TV/RGB switch is set to RGB.

ENGLISH
11
C
Co on nn ne ec ct t t to o a a T TV V
Locate the VIDEO or SCART RGB (if applicable) input port of the TV or Video equipment
(i.e., VCR) to record your presentation and connect it to RCA jack of RS-232/CVBS cable.
C
Co on nn ne ec ct ti in ng g t th he e P Po ow we er r
Connect the power adapter to a standard 100V~240V AC power outlet. The unit
automatically in standby mode once the power is connected. Press to turn on.
Power adapter Wall outlet

ENGLISH
12
C
Co on nn ne ec ct t t to o a a C Co om mp pu ut te er r
Locate the RGB (VGA) output port of the computer or laptop and connect it to RGB IN port
of AVerVision F50. The video signal from the RGB IN port is streamed to RGB OUT and
DVI-I OUT port.
- To display computer image, press Camera/PC button on the control panel
or remote control to switch AVerVision F50 to computer mode.
- For laptop to output display image, use the keyboard command (FN+F5)
to switch between the display modes. For different command, please refer
to your laptop manual.
C
Co on nn ne ec ct t t to o a a C Co om mp pu ut te er r v vi ia a U US SB B
1. Set the USB switch on the left panel to
and the LED on the control panel
will light up. This enables you to use
AVerVision F50 as a USB Camera or to
transfer the captured pictures/videos from the
memory source and to computer. Also see
“Transfer File from AVerVision F50 to
PC”.
2. Locate the USB port of the computer or laptop and connect it to PC port of
AVerVision F50.