AVer AVerVision F70W User manual

©2020 AVer Information Inc. All rights reserved.
Note: Please referto the F70WV2 support
page FAQs formore advance Wireless
setup.
www.averusa.com/support
Plug-in the WiFi dongle to PC/laptop.
P2P connection via Wi-Fi Dongle(Windows)
Equipment needed: F70WV2 w/power adapter, PC/w Wi-Fi Dongle and Sphere 2 installed
21 3 4
Run Sphere2 on your laptop.
7 8
Open menu.
Install AVer Sphere2 application
on laptop.
Enable WiFi function.
|
|
|
|
|
|
|
|
|
|
Go to the WiFi setup tab > AP Mode.
5
Wi-Fi Dongle Laptop
AVer Sphere2
Laptop
6
Note: Download Sphere2 application from
bleow URL.
www.averusa.com/education/support/aplus-suite
Select F70WV2 to connect.
Then, WiFi will be connected.
Connect F70WV2 to HDMI display
and plug in power adapter.
LCD/DCP projector HDMI monitor

Connect the WiFi dongle to MacBook.
P2P connection via Wi-Fi Dongle(MAC)
Equipment needed:F70WV2 w/power adapter, MacBook/w Wi-Fi Dongle and Sphere 2 installed
21 3 4
6 7 8
Open menu. Open Network Preference.
Install AVer Sphere2 application
on MacBook.
Enable WiFi function.
|
|
|
|
|
|
|
|
|
|
5
Wi-Fi Dongle MacBook MacBook
Note:
■Download Sphere2 application from
bleow URL.
www.averusa.com/education/support/aplus-suite
■Unzip the file and install Wi-Fi dongle drive
and Sphere2 on your MacBook.
AVer Sphere2
+
Wi-Fi Dongle drive
MacBook connects to F70WV2 Wi-Fi.
Go to the WiFi setup tab > AP Mode.
Note:The default password is “AVeradmin”.
Connect F70WV2 to HDMI display
and plug in power adapter.
LCD/DCP projector HDMI monitor

Select Set Service Order to set Wi-Fi as
1st network service.
109 11 12
Drag Wi-Fi to top of list. Click Apply to save the changes.
Note: Please referto the F70WV2 support
page FAQs formore advance Wireless
setup.
www.averusa.com/support
Run Sphere2 on your MacBook.
Then, select F70WV2 to connect.
Note: Click OK to save the changes.
AVerVision F70WV2

Note: Referto the “Connecting to
HDMI” instructions to connect the F70WV2
to an HDMI display. This only needs to
be done once forthe initial WiFi setup.
Note: after connecting the F70WV2 to your
network, you no longerneedto use an
HDMI display or repeat these steps. Just
remember to toggle the “WiFi” button
every time you want to stream video
wirelessly (insteadof USB).
Note: Please referto the F70WV2 support
page FAQs formore advance Wireless
setupandaccess if you are having difficulty
setting the camera from the camera drop
down box.
www.averusa.com/support
Connect F70WV2 to HDMI display
and insert WiFi Dongle.
Enable WiFi function. Open menu. Go to the WiFi setup tab.
Connecting to WiFi
Equipment needed: F70WV2 w/power adapter, PC/Mac w/A+ Suite installed, access to WiFi network
1 2 3 4
Select SSID and password. Connect. WiFi successfully connected. Open Sphere2, select F70WV2.
5 6 7 8
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WiFi Dongle HDMI monitor
AVerVision F70WV2

Note: After connecting the F70WV2 to the
either the AVer IFP or Dongle, the WiFi LED
will flash
Insert WiFi Dongle to F70WV2. Enable WiFi function. Open menu. Run the “Screen Share” app on the
AVer Interactive Flat Panel. If you do
not have an AVer IFP, you can also
connect to a commercial Miracast
Dongle such as the one from
Microsoft (Wireless Adapter).
Connecting via Miracast
Equipment needed: F70WV2 w/power adapter, AVer interactive flat panel, access to WiFi network
1 2 3 4
Select “Miracast” mode and go to
“setup”.
Select the device “AVerBoard_xxxxxx”
(if you have an AVer IFP) or the
Wireless Dongle name as presented
on the screen. Then hit “Connect”.
When connection is successful.
You will see the F70WV2 video being
streamed live on the display.
To disconnect the session, hit the
“Freeze/Stop” button on the camera
once. To reconnect, press and hold
the “WiFi” button until the WiFi LED
blinks. Connection to the either the
AVer IFP or Dongle should take place
after that.
5 6 7 8
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WiFi Dongle
Note: Please make sure the panel is
connected to the local WiFi network.
Or if you are connecting to a Wireless Dongle,
please make sure the dongle is plugged into a
display and turned on. Please note down the
IFP name or Dongle name.
Note: You would need to connect the F70WV2
to another monitor display to set this up.
This setup would need to be performed
only once to connect to the
AVer “Screen Share” app.

Insert WiFi Dongle. Connect F70WV2 to HDMI display
and plug in power adapter.
1 sec.
LCD/DCP projector HDMI monitor
Turn on F70WV2. Auto focus camera.
Connecting to HDMI
Equipment needed: F70WV2 w/power adapter, HDMI display, HDMI cable
Note: Adjust the video input on your
HDMI display andselect the HDMI input
the F70WV2 is connectedto.
Note: F70WV2 defaults to 1280x720 upon
first use, change to 1080p in the on-screen
display menu if your display supports it.
1 2 3 4
|
|
|
|
|
|
|
|
|
|
POWER POWER
WiFi Dongle

Desktop Laptop
Note: if this is the first time you are
connecting the F70WV2 to yourPC/Mac,
please wait forthe USB driver to finish
installing. You can downloadthe
software forfree at
www.averusa.com/support
Note: be sure the WiFi function on the
F70WV2 is disabled (LED indicatorshould
be completely off– not orange/blue).
Connecting to PC/Mac via USB
Equipment needed: F70WV2 w/power adapter, PC/Mac w/A+ Suite installed, mini USB cable
1 2 3 4
Auto focus camera.Plug in power adapter and
Turn on F70WV2.
Connect F70WV2 to PC/Mac
via mini USB cable.
Open Sphere2, select F70WV2.
1 sec.
|
|
|
|
|
|
|
|
|
|
POWER POWER
AVerVision F70WV2

1. POWER
2. CAMERA
3. RECORDING
4. CAPTURE
5. ROTATE
6. MENU
7. AUTO FOCUS
8. ZOOM +/-
9. ENTER
10. LAMP
Remote Control
The remote control requires two (2) “AAA” size batteries (supplied), make sure batteries are installed properly before use.
For User Manual and Software, please visit the link below.
http://averusa.com/classroom-technology/support/
Contact Information
AVer Information Inc. USA
668 Mission Court,
Fremont, California 94539 USA
Toll Free: [phone]
Email: [e-mail] P/N:300AP0DW-???