AXIOMTEK FAB101-14P13 User manual

©Copyright 2014Axiomtek Co., Ltd.
Version A1 Sep 2014
Printed in Taiwan
9419B101020E
4
Board Dimensions
FAB101-14P13 Quick Installation Guide
©Copyright 2014Axiomtek Co., Ltd.
Version A2 Sep 2014
Printed in Taiwan
9419B101020E
1
Packing List
FAB101-14P13 14-Slot ATX-Supported PICMG 1.3 Bus Backplane x 1
Quick Installation Guide x 1
Please contact your local vendors if any damaged or missing items. DO
NOT apply power to the board if any damaged components.
Jumper List
Jumper Description
JP1 Open :ATX by CPU Card(default)
Short : ATX Power Always On
JP2 (Optional) Auto Power Button Open : Disable
Short : Enable (default)
Connectors
Connector Description
CN1 ATX POWER BUTTON
CN2 HW_RESET
CN3 AT Power Connector(Optional)
CN4 24 Pin ATX Power Connector
CN5 12V Power Connector
CN6 8 Pin Connector for Thermal Board
SHB1-SHB4 PICMG 1.3 Full-SIZE SBC Slot
PCI0-PCI12 PCI Slots (32-bit/33MHz)
FAB101-14P13 Series Embedded System

©Copyright 2014Axiomtek Co., Ltd.
Version A1 Sep 2014
Printed in Taiwan
9419B101020E
2
Power Button Connector (CN1)
Pin Signal
1 PWR_BT
2 GND
Hardware Reset Connector (CN2)
Pin Signal
1 HW_RST
2 GND
24-PIN ATX Power Connector (CN4)
Pin Signal Pin Signal
1 +3.3V 2 GND
3 +12V 4 +5V
5 +12V 6 +5V
7 +5V_SB 8 +5V
9 PWR_ON 10 NC
11 GND 12 GND
13 +5V 14 GND
15 GND 16 GND
17 +5V 18 PS_ON
19 GND 20 GND
21 +3.3V 22 -12V
23 +3.3V 24 +3.3V
©Copyright 2014Axiomtek Co., Ltd.
Version A1 Sep 2014
Printed in Taiwan
9419B101020E
3
+12V ATX Power Connector (CN5)
Pin Signal
1 GND
2 GND
3 +12V
4 +12V
12
34
8-Pin Connector for thermal board (CN6)
Pin Signal Pin Signal
1 GND 5 -5V
2 GND 6 5V
3 5VSB 7 -12V
4 3.3V 8 12V
USB Connector 1, 3 (Optional)
Pin Signal Pin Signal
1 USB POWER 2 USB POWER
3 USB P0- 4 USB P1-
5 USB P0+ 6 USB P1+
7 USB GND 8 USB GND
9 NC 10 GND