AXIOMTEK DSP300-318 Series User manual

©Copyright 2018 Axiomtek Co., Ltd.
Version A1 December 2018
Printed in aiwan
9412K300000E
4
Installation of DIMM1 Memory
Step 1 Turn off the system and unplug the power cord.
Step 2 Turn the system upside down to locate screws at the bottom
and then loosen all screws.
Step 3 Open the TOP and SIDE cover.
Step 4 Located the DIMM socket on main board.
Step 5 Locate the memory module, insert a gold colored contact into
the socket and push the module two end latches till locked.
Step 6 Put the TOP & SIDE cover and fasten eight screws back onto
the system.
Note: Please refer to the user’s manual to get more detail information.
DSP300-318 Quick Installation Guide
©Copyright 2018 Axiomtek Co., Ltd.
Version A1 December 2018
Printed in aiwan
9412K300000E
1
Packing List
System Unit x 1 DVD/CD x 1 (for Driver & Manual)
Quick Installation Guide x 1 36W power adapter x 1
US power cord x 1 or
EU power cord x 1 Foot Pad x 4
 Do not try to apply power to the system if any damaged components.
Dimensions
DSP300-318 Series Digital Signage Player

©Copyright 2018 Axiomtek Co., Ltd.
Version A1 December 2018
Printed in aiwan
9412K300000E
2
I/O Outlets
The following figures show I/O outlets on the DSP300-318.
Front View
Rear View
1 12VDC power input 9 Line-out
2 DP 10 USB 3.0
3 HDMI 11 SIM card
4 Serial Port 12 Reset switch
5 USB 2.0 13 Power switch
6 USB 3.0 14 HDD LED
7 GbE LAN ports 15 Remote power switch
8 MIC-in
© Copyright 2018 Axiomtek Co., Ltd.
Version A1 December 2018
Printed in aiwan
9412K300000E
3
Installation of M.2 SSD Storage Module
Step 1 Turn off the system and unplug the power cord.
Step 2 Turn the system upside down to locate screws at the bottom
and then loosen all screws.
Step 3 Open the TOP and SIDE cover.
Step 4 Located the M.2 socket on main board.
Step 5 Identify the M.2 slot, insert a M.2 SATA SSD module into the
socket and then fasten a screw.
Step 6 Put the TOP & SIDE cover and fasten eight screws back onto
the system