AXIOMTEK MPC153-834 User manual

MPC153W-834
All-in-One 15.6” WXGA TFT Fanless Medical
Touch Panel Computer with
Intel® AtomTM J1900 Processor Onboard
User’s Manual

ii
Disclaimers
This manual has been carefully checked and believed to contain accurate information.
Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third
party’s rights, and any liability arising from such use.
Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,
completeness or usefulness of any information in this document. Axiomtek does not make any
commitment to update the information in this manual.
Axiomtek reserves the right to change or revise this document and/or product at any time
without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Axiomtek Co., Ltd.
CAUTION
If you replace wrong batteries, it causes the danger of explosion. It is recommended by the
manufacturer that you follow the manufacturer’s instructions to only replace the same or
equivalent type of battery, and dispose of used ones.
Copyright 2015 Axiomtek Co., Ltd.
All Rights Reserved
July 2016, Version A2
Printed in Taiwan

iii
Symbol Index
No.
Description
Symbol
1
CE Marking
2
Manufactured by：address of the MFG
3
EC REP address
4
Refer to instruction 4 manual / booklet
5
Serial Number
AXIOMTEK Co., Ltd.
8F., No.4, Lane 235, Baoqiao Road, Xindian District,
New Taipei City 231, Taiwan (R.O.C.)
http://www.axiomtek.com.tw
Made in Taiwan
MEDNET GmbH, Borkstrasse 10, 48163 Muenster,
Germany

iv
Safety Precautions
Before getting started, read the following important cautions.
1. Be sure to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and place all electronic components in any
static-shielded devices. Most electronic components are sensitive to static electrical
charge.
2. Disconnect the power cords from the MPC153-834 Series before making any installation.
Be sure both the system and the external devices are turned OFF. Sudden surge of
power could ruin sensitive components. Make sure the MPC153-834 Series is properly
grounded.
3. Do not open the system’s top cover. If opening the cover for maintenance is a must, only
a trained technician is allowed to do so. Integrated circuits on computer boards are
sensitive to static electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:
Before handling a board or integrated circuit, touch an unpainted portion of the
system unit chassis for a few seconds. This will help to discharge any static
electricity on your body.
When handling boards and components, wear a wrist-grounding strap, available
from most electronic component stores.
Trademarks Acknowledgments
Axiomtek is a trademark of Axiomtek Co., Ltd.
Windows®is a trademark of Microsoft Corporation.
IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation.
Intel®and Pentium®are trademarks of Intel Corporation.
AMI is trademark of American Megatrend Inc.
Other brand names and trademarks are the properties and registered brands of their
respective owners.

v
Table of Contents
Disclaimers......................................................................................................i
Disclaimers.....................................................................................................ii
CAUTION ........................................................................................................ii
Symbol Index.................................................................................................iii
Safety Precautions........................................................................................iv
Chapter 1 Introduction............................................. 1
1.1 General Description............................................................................2
1.2 Specifications......................................................................................3
1.3 Dimensions..........................................................................................5
1.4 I/O Outlets............................................................................................7
1.5 Packing List.........................................................................................8
Chapter 2 Hardware and Installation ...................... 9
2.1 CFast™ card Installation ..................................................................10
2.2 SBC87834 Jumpers and Connectors...............................................11
2.2.1 Jumper Settings ........................................................................................ 13
2.2.2 Connectors................................................................................................ 14
2.3 Ethernet..............................................................................................24
2.4 Mountings –Wall/Desktop/VESA.....................................................25
2.4.1 Wall-Mounting ........................................................................................... 25
2.4.2 Desktop-Mounting..................................................................................... 26
2.5 HDD Installation.................................................................................27
2.6 DRAM Installation..............................................................................28
2.7 Mini cards Card Installation..............................................................30
2.7.1 Wireless LAN Card Installation ................................................................. 30
2.7.2 mSATA Card Installation............................................................................ 32
2.8 Power Input (Phoenix type)..............................................................33
Chapter 3 AMI BIOS Setup Utility .......................... 35
3.1 Navigation Keys ................................................................................35
3.2 Main Menu..........................................................................................36
3.3 Advanced Menu.................................................................................37
3.4 Chipset Menu.....................................................................................47
3.5 Security..............................................................................................50

vi
3.6 Boot Menu..........................................................................................51
3.7 Save&Exit...........................................................................................52
Chapter 4 Drivers Installation .............................. 53
4.1 System ...............................................................................................53
4.1.1 Win 7......................................................................................................... 53
4.1.2 Win 8/8.x ................................................................................................... 54
4.2 Touch Screen.....................................................................................55
4.2.1 Specification.............................................................................................. 55
4.2.2 Driver Installation- Windows 7/8.x............................................................. 56
4.3 Embedded O.S...................................................................................58
4.3.1 WES 7 & WE8S......................................................................................... 58
Appendix A Watchdog Timer................................... 59
About Watchdog Timer................................................................................59
How to Use Watchdog Timer.......................................................................59
WDT Sample Program .................................................................................60
Appendix B Volume Control .................................... 63
About Volume Control.................................................................................63
How to Use Volume Control........................................................................63
Removed Volume Control Tool...................................................................71

MPC153-834 User’s Manual
Introduction 1
Chapter 1
Introduction
This chapter contains general information and detailed specifications of the MPC153-834.
Chapter 1 includes the following sections:
General Description
Specifications
Dimensions
I/O Outlets
Package List

MPC153-834 User’s Manual
2 Introduction
1.1 General Description
The MPC153-834 is a fan-less and compact-size touch panel computer, equipped with a 15.6”
TFT LCD display, 5W flat resistive touch or project capacitive multi-touch for option and low
power consumption Intel® Celeron® Processor J1900. The MPC153-834 supports Windows 7,
Windows 8.x and Windows embedded OS. The panel computer is able to install a CFast™
card or mSATA and provide two Mini card slots for wireless module. Its excellent ID and
friendly user interface make it a professional yet easy-to-use panel computer. The
MPC153-834 is an ideal for space-limited applications in factory automation, machine maker
operating systems, building automation, and more.
MPC153-834: 15.6”TFT WXGA Fanless Touch Panel Computer
Reliable and Stable Design
The MPC153-834 adopts a fanless cooling system and a CFast™ card, which makes it
suitable for vibration environments.
Embedded O.S. Supported
The MPC153-834 not only supports Windows 7 and Windows 8.x, but also supports
embedded OS,. For storage device, the MPC153-834 supports a half-slim SATA device
and CFast™ card or mSATA.
Industrial-grade Product Design
The MPC153-834 has an incredible design to be used in different industrial
environments.
The front bezel meets the IP65/NEMA4 standard.
For connecting other devices, the MPC153-834 also features several interfaces: USB,
Ethernet, and RS-232/422/485.

MPC153-834 User’s Manual
Introduction 3
1.2 Specifications
Main CPU Board
CPU
Intel® Celeron® Processor J1900 onboard.
System Memory
One 204-pin DDR3L SO-DIMM socket
Maximum memory up to 8BG
BIOS
America Megatrends BIOS
I/O System
Standard I/O
Two RSS-232/422/485
One RS232 w/isolated 4KV
Two USB 3.0
Ethernet
2x RJ45 Giga Ethernet (Intel i210IT)
Audio
One Line out
Two Internal 3W speaker
Expansion
1 x Mini-card slot (w/SIM slot)
1 x Mini-card slot (supports mSATA, optional)
Storage
One CFast™ or mSATA
One half-slim SATA SSD
Power connector
MPC153-834-FR-DC/MPC153-834-PCT-DC : 9VDC to 36VDC with phoenix power
connector or
MPC153-834-FR-J/MPC153-834-PCT-J: External 60W Medical AC Adapter with
screw type connector

MPC153-834 User’s Manual
4 Introduction
System Specification
15.6”WXGA(1366x768) LCD with LED backlight
Project capacitive multi-touch or 5 wired flat resistive touch
Fanless Heat Dispensing Design
Disk drive housing:
One half-slim SATA drive
Net Weight
3.0 Kgs (6.61 lb)
Dimension (Main Body Size)
394.2 mm x 57 mm x 257.2 mm
Operation Temperature
0℃to 40℃
Relative Humidity
10% to 90% @ 40℃, Non-Condensing
Vibration
2.0G, 5 to 500 Hz, 2.0 G random for CFast™ card
Power input
9~36VDC with phoenix power connector or
External 60W AC medical Adapter
—Power Input: 90VAC to 264VAC
—Power Output: 24VDC, Max. 5A
NOTE All specifications and images are subject to change without notice.

MPC153-834 User’s Manual
Introduction 5
1.3 Dimensions
This diagram shows you dimensions and outlines of the MPC153-834.

MPC153-834 User’s Manual
6 Introduction

MPC153-834 User’s Manual
Introduction 7
1.4 I/O Outlets
Please refer to the following illustration for I/O locations of the MPC153-834.
NOTE The volume control function only can be performed under the windows
operation system with AXIOMTEK volumeSYNC program.

MPC153-834 User’s Manual
8 Introduction
1.5 Packing List
When you receive the MPC153-834, the bundled package should contain the following items:
MPC153-834 x 1
Driver CD x1
Screws for HDD x4
Phoenix connector x1 (for MPC153-834)
Medical Power Adapter & power cord (for MPC153-834-J)
If you can not find the package or any items are missing, please contact Axiomtek distributors
immediately.

MPC153-834 User’s Manual
Hardware and Installation 9
Chapter 2
Hardware and Installation
The MPC153-834 provides rich I/O ports and flexible expansions for you to meet different
demand, for example, CFast™ card. The chapter will show you how to install the hardware. It
includes:
CFast™ Card
SBC87834 Jumpers and Connectors
Ethernet
Mounting Way
Hard disk
DRAM
Wireless LAN Card
Power Input

MPC153-834 User’s Manual
10 Hardware and Installation
2.1 CFast™ card Installation
The MPC153-834 provides one CFast slot for users to install CFast™ card. Please refer to the
following instructions for installation:
Step 1 Turn off the system, and unplug the power cord.
Step 2 Remove the cover of CFast™ socket.
Step 3 Locate the CFast™ socket, and insert the card into the socket.

MPC153-834 User’s Manual
Hardware and Installation 11
2.2 SBC87834 Jumpers and Connectors
Component Side

MPC153-834 User’s Manual
12 Hardware and Installation
Solder Side

MPC153-834 User’s Manual
Hardware and Installation 13
2.2.1 Jumper Settings
Making the proper jumper settings configure the SBC87834 to match the needs of your
application.
The following table shows the default jumper settings for the onboard devices.
Jumper
★Default Setting
Jumper Setting
JP1
★Panel backlight control PWM mode
Panel backlight control DC mode
Short 1-2
Short 3-4
JP2
Touch Controller 4,8 WIRE
★Touch Controller 5 WIRE
Short 1-2
Short 2-3
JP4
★LVDS Panel Power : 3.3V
LVDS Panel Power : 5V
Short 1-2
Short 2-3
JP5
Touch OFF
★Touch ON
Short 1-2
Short 2-3
JP6
★PCIe device
mSATA device
Short 1-2
Short 2-3
JP7
AT mode
★ATX mode
Short 1-2
Short 2-3
JP8
★Normal
Clear CMOS
Short 1-2
Short 2-3
JP11
COM3_5VSB
★COM3_5V
Short 1-2
Short 2-3
JP12
★COM1 normal mode
COM1 pin1 with power :+5V
COM1 pin9 with power :+12V
Short 3-5,4-6
Short 1-3,4-6
Short 3-5,2-4
JP13
★COM2 normal mode
COM2 pin1 with power :+5V
COM2 pin9 with power :+12V
Short 3-5,4-6
Short 1-3,4-6
Short 3-5,2-4
JP14
★COM3 normal mode
COM3 pin1 with power :+5V
COM3 pin9 with power :+12V
Short 3-5,4-6
Short 1-3,4-6
Short 3-5,2-4
JP15
★COM4 normal mode
COM4 pin1 with power :+5V
COM4 pin9 with power :+12V
Short 3-5,4-6
Short 1-3,4-6
Short 3-5,2-4

MPC153-834 User’s Manual
14 Hardware and Installation
2.2.2 Connectors
The connectors allow the CPU Board to connect with other parts of the system. Ensure that all
connectors are in place and firmly attached. The following table lists the function of each
connector on the SBC87834.
Connectors
Label
LVDS connector
CN1
LVDS inverter connector
CN2
TOUCH connector
CN3
HDD power connector
CN4
Full size min-PCIe connector
CN5
FRONT PANEL pin header
CN6
SIM card connector
CN7
Full size min-PCIe connector
CN8
DC IN connector
CN9
Digital I/O pin header
CN10
Speaker Out & MIC IN connector
CN11
VGA connector
CN12
Audio connector
CN13
USB CONNECTOR (reserved)
CN14/CN20
Audio Lin In connector
CN15
Power lamp connector
CN16
Power button connector
CN17
Touch function enable/disable & LED indicator
connector
CN18
Panel control Keypad connector
CN19
CPU FAN
FAN1
System FAN
FAN2
USB2.0 box header
USB1
USB3.0 connector
USB2
Display Port connector
DP1
SATA connector
SATA1
RJ45 LAN connector
LAN1, LAN2
Serial Port connector
COM1,COM2
Serial Port box header
COM3,COM4
CFast connector
SCF1