AXIOMTEK GOT3846T-832 User manual

GOT3846T-832
All-in-One
8.4”SVGA TFT Fanless Compact-Size
PANEL PC
User’s Manual

ii
Disclaimers
This manual has been carefully checked and believed to contain accurate information.
Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any
third party’s rights, and any liability arising from such use.
Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,
completeness or usefulness of any information in this document. Axiomtek does not
make any commitment to update the information in this manual.
Axiomtek reserves the right to change or revise this document and/or product at any
time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted,
in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, without the prior written permission of Axiomtek Co., Ltd.
Copyright 2012 Axiomtek Co., Ltd.
All Rights Reserved
Sep. 2012, Version A1
Printed in Taiwan

iii
Safety Precautions
Before getting started, please read the following important safety precautions.
1. The GOT3846T-832 does not come equipped with an operating system. An operating
system must be loaded first before installing any software into the computer.
2. Be sure to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and place all electronic components in any
static-shielded devices. Most electronic components are sensitive to static electrical
charge.
3. Disconnect the power cord from the GOT3846T-832 before any installation. Be sure both
the system and external devices are turned OFF. A sudden surge of power could ruin
sensitive components that the GOT3846T-832 must be properly grounded.
4. The brightness of the flat panel display will be getting weaker as a result of frequent
usage. However, the operating period varies depending on the application environment.
5. Turn OFF the system power before cleaning. Clean the system using a cloth only. Do not
spray any liquid cleaner directly onto the screen. The GOT3846T-832 comes with a
touchscreen. Although the touchscreen is chemical resistant, it is recommended that you
spray the liquid cleaner on a cloth first before wiping the screen. In case your system
comes without the touchscreen, you must follow the same procedure and not spray any
cleaner on the flat panel directly.
6. Avoid using sharp objects to operate the touchscreen. Scratches on the touchscreen
may cause malfunction or internal failure to the touchscreen.
7. The flat panel display is not susceptible to shock or vibration. When assembling the
GOT3846T-832, make sure it is securely installed.
Do not open the system’s back cover. If opening the cover for maintenance
is a must, only a trained technician is allowed to do so. Integrated circuits
on computer boards are sensitive to static electricity. To avoid damaging
chips from electrostatic discharge, observe the following
precautions:Before handling a board or integrated circuit, touch an
unpainted portion of the system unit chassis for a few seconds. This will
help to discharge any static electricity on your body.
When handling boards and components, wear a wrist-grounding strap, available
from most electronic component stores.
Trademarks Acknowledgments
Axiomtek is a trademark of Axiomtek Co., Ltd.
IBM, PC/AT, PS/2, VGA are trademarks of International
Business Machines Corporation.
Intel®and Atom™are registered trademarks of Intel Corporation.
MS-DOS, Microsoft C and Quick BASIC are trademarks of Microsoft Corporation.
VIA is a trademark of VIA Technologies, Inc.
SST is a trademark of Silicon Storage Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
Other brand names and trademarks are the properties and registered brands of their
respective owners.

iv
Table of Contents
Disclaimers..................................................................................................................................ii
Safety Precautions...................................................................................................................... iii
CHAPTER 1 INTRODUCTION........................................................................................................1
1.1 General Description...................................................................................................2
1.2 Specifications.............................................................................................................3
1.2.1 Main CPU Board........................................................................................................3
1.2.2 I/O System .................................................................................................................3
1.2.3 System Specification..................................................................................................4
1.3 Dimensions................................................................................................................5
1.4 I/O Outlets..................................................................................................................7
1.5 Packing List................................................................................................................8
CHAPTER 2 HARDWARE INSTALLATION...................................................................................9
2.1 Open back cover......................................................................................................10
2.2 CF card Installation..................................................................................................11
2.3 Serial Ports Interface ...............................................................................................13
2.3.1 COM1&COM2 Connector........................................................................................14
2.3.2 COM3&COM4 Connector........................................................................................14
2.4 Ethernet ...................................................................................................................15
2.5 Mountings: Panel / Wall / Desktop / VESA..............................................................16
2.5.1 VESA-ARM/Wall-Mount...........................................................................................16
2.5.2 Panel-mount Kit Assembly.......................................................................................17
2.6 HDD Installation.......................................................................................................18
2.7 DRAM Installation ....................................................................................................21
2.8 Wireless LAN Card Installation................................................................................25
2.9 Power.......................................................................................................................27
CHAPTER 3 AMI BIOS SETUP UTILITY .....................................................................................29
3.1 Starting.....................................................................................................................29
3.2 Navigation Keys.......................................................................................................30
3.3 Main Menu ...............................................................................................................31
3.4 Advanced Menu.......................................................................................................32
3.5 Chipset Menu...........................................................................................................39
3.6 Boot Menu................................................................................................................41
3.7 Security Menu..........................................................................................................42
3.8 Exit Menu.................................................................................................................43
CHAPTER 4 DRIVERS INSTALLATION ......................................................................................45
4.1 System.....................................................................................................................45
4.2 Touch Screen...........................................................................................................46
4.2.1 Specification.............................................................................................................46
4.2.2 Driver Installation- Windows 7 .................................................................................46
4.3 Embedded O.S. .......................................................................................................49
4.3.1 WES 7......................................................................................................................49

GOT3846T-832 User’s Manual
Introduction
1
CHAPTER 1
INTRODUCTION
This chapter contains general information and detailed specifications of the GOT3846T-832.
Chapter 1 includes the following sections:
General Description
Specification
Dimensions
I/O Outlets
Package List

GOT3846T-832 User’s Manual
Introduction
2
1.1 General Description
The GOT3846T-832 adopts a 8.4-inch SVGA TFT LCD with 450-nit brightness and an
Intel®AtomTM processor N2600 1.6 GHz to provide excellent computing performance
and thermal resistance. This fanless platform is especially designed for operating
under heavy-duty environment including steel refinery, oil pipe, ship, machine maker
operating systems and many more. Having below abilities makes GOT3846T-832
surely a most robust and cost-effective solution.
Wide Operating Temperature Range
GOT3846T-832 features a technology of wide operating temperature range which allows
it to work between -20°C to +55°C. It incorporates compact ID and fanless cooling
system with a low power Intel®AtomTM processor N2600 1.6 GHz, making the platform a
power-efficient solution.
Reliable and Stable Design
The GOT3846T-832 adopts a fan-less cooling system, which makes it especially
suitable for vibration-heavy environments, best for the transportation, ship, and
industrial machinery markets. For high capacity storage requirement, GOT3846T-832
can work under 1.0G (5 ~ 500Hz, random for 2.5”HDD) in operation mode with a patent
of anti-vibration design. The patent improves the system reliability and sustainability.
WLAN Antenna Supported (optional)
GOT3846T-832 has a PCI Express Mini Card slot for optional add-ons such as wireless
LAN card for 802.11 b/g connections & 3G/GPRS application, and more. It also
provides an optional fixed rotational WLAN antenna for wireless network connection.
More Features
GOT3846T-832 utilizes one 204-pin DDR3 800 SODIMM system memory max. up to 2GB, one
SATA HDD and one CF. It provides over-current protection-fuse and a full set of I/O including
RS-232, RS-232/422/485, USB 2.0, audio (line-out), Gigabit Ethernet and VGA. Additionally, this
slim unit supports panel mount, wall mount (optional), VESA mount (optional) and desktop stand
(optional).

GOT3846T-832 User’s Manual
Introduction
3
1.2 Specifications
1.2.1 Main CPU Board
CPU
Intel○RAtomTM N2600 1.6GHz processor onboard
System Chipset
Intel○RNM10 Express
BIOS
America Megatrends BIOS
System Memory
One 204-pin DDR3 800MHz SO-DIMM socket
Maximum memory up to 2GB
1.2.2 I/O System
Standard I/O
1 x RS-232/422/485, 3 x RS232
4x USB 2.0
1x VGA
Ethernet
2x RJ45 for Giga Ethernet
Audio
1 x Line-out
Expansion
1 x Mini-card slot
Storage
1 x 2.5”SATA HDD
1 x CompactFlash™ Type-II(optional)
Power connector
Phoenix power connector

GOT3846T-832 User’s Manual
Introduction
4
1.2.3 System Specification
8.4”SVGA(800x600) LCD with LED backlight
5 wired resistive Touch
Fanless Heat Dispensing Design
IP65 aluminum front bezel
Disk drive housing:
One 2.5”SATA drive
Net Weight
3.4 Kgs (7.49 lb)
Dimension (Main Body Size)
248x 58.3x 183mm
Operation Temperature
-20℃to 55℃
Relative Humidity
10% to 95% @ 40℃, Non-Condensing
Power input
10~30VDC with phoenix power connector
NOTE All specifications and images are subject to change without notice.
NOTE If the operation temperature is higher than 40 ℃ , the wide temperature DRAM is
recommended to be used on the device.

GOT3846T-832 User’s Manual
Introduction
5
1.3 Dimensions
The following diagrams show the dimensions and outlines of GOT3846T-832.

GOT3846T-832 User’s Manual
Introduction
6

GOT3846T-832 User’s Manual
Introduction
7
1.4 I/O Outlets
Please refer to the following illustration for I/O locations of the GOT3846T-832.

GOT3846T-832 User’s Manual
Introduction
8
1.5 Packing List
When you receive the GOT3846T-832, the bundled package should contain the following items:
GOT3846T-832 unit x 1
Driver CD x1
Phoenix connector x 1
Panel mount kit x 6
Wall mount Kit x 1
Screws for HDD x 4
If you can not find the package or any items are missing, please contact Axiomtek distributors
immediately.

GOT3846T-832 series User’s Manual
Hardware Installation
9
CHAPTER 2
HARDWARE INSTALLATION
The GOT3846T-832 provides rich I/O ports and flexible expansions for you to meet
different demand, for example CF card. The chapter will show you how to install the
hardware. It includes:
CompactFlash™Card
Serial Port
Ethernet
Mounting Method
Hard disk
DRAM
Wireless LAN Card
Power

GOT3846T-832 User’s Manual
Hardware Installation
10
2.1 Open back cover
This section tells users how to open back cover. Please follow the steps below.
Step 1 Unscrew 12 screws on the back cover. Please refer the photo below.
Step 2 Remove the back cover.

GOT3846T-832 series User’s Manual
Hardware Installation
11
2.2 CF card Installation
The GOT3846T-832 provides one CF slot for users to install CompactFlash™card. Please refer
to the following instructions for installation:
Step 1 Unscrew 12 screws on the chassis.

GOT3846T-832 User’s Manual
Hardware Installation
12
Step 2 Remove the chassis.
.
Step 3 Insert the card into the socket.

GOT3846T-832 series User’s Manual
Hardware Installation
13
2.3 Serial Ports Interface
The GOT3846T-832 has four serial ports. COM1 is RS-232/422/485, while COM2, COM3, and
COM4 are RS-232.
The following table shows you the pin assignments of this connector:
Description
Function
Jumper Setting
COM 1
RS-232 (Default)
JP9
JP7
JP8
RS-422
JP9
JP7
JP8
RS-485
JP9
JP7
JP8

GOT3846T-832 User’s Manual
Hardware Installation
14
2.3.1 COM1&COM2 Connector
The COM1 and COM2 is a standard DB-9 connector. This connector is equipped with
+5V level power capability on DCD and +12V level on RI by setting JP10 and JP11. The
pin assignment of RS-232/RS-422/RS-485 is listed on the following table. If you need
COM1 port to support RS-422 or RS-485 mode, please refer to Jumper Settings
COM1 (SBC87832)
1 5
6 10
2.3.2 COM3&COM4 Connector
The COM3 and COM4 is a 2x5 pin box header. This connector is equipped with +5V
level power capability on DCD and +12V level on RI by setting JP12 and JP13. The pin
assignment of RS-232/RS-422/RS-485 is listed on the following table. If you need COM1
port to support RS-422 or RS-485 mode, please refer to Jumper Settings
Pin
RS-232
RS-422
RS-485
1
DCD
TX-
Data-
2
RXD
TX+
Data+
3
TXD
RX+
N.C
4
DTR
RX-
N.C.
5
GND
No use
No use
6
DSR
No use
No use
7
RTS
No use
No use
8
CTS
No use
No use
9
RI
No use
No use
Pin
Signal
Pin
Signal
1
DCD
2
DSR
3
RXD
4
RTS
5
TXD
6
CTS
7
DTR
8
RI
9
GND
10
N.C.

GOT3846T-832 series User’s Manual
Hardware Installation
15
2.4 Ethernet
The GOT3846T-832 is equipped with a high performance Plug and Play Ethernet
interface, full compliant with IEEE 802.3 standard, and can be connected with a RJ-45
LAN connector.
Please refer to detailed pin assignment list below:
Pin
Signal
1
2
3
4
5
6
7
8
RJ-45
1
TX+ (Data transmission positive
2
TX- (Data transmission negative)
3
Rx+(Data reception positive)
4
RJ45 termination
5
RJ45 termination
6
Rx- (Data reception negative)
7
RJ45 termination
8
RJ45 termination

GOT3846T-832 User’s Manual
Hardware Installation
16
2.5 Mountings: Panel / Wall / Desktop / VESA
There are 4 application options for the GOT3846T-832, Panel/Wall/Desktop/VESA mountings.
2.5.1 VESA-ARM/Wall-Mount
The GOT3846T-832 provides VESA mount: 75x75 mm. Screw four screws to fix the kit
in the back chassis.