Backyard Creations Ellington FTS61288 User manual

Chat Table
style # FTS61288
sku # 2721066
>>assembly instructions
Ellington Collection

ATTENTION:
This Table is not intended for use during any kind of inclement weather and the manufacturer is not
and can not be held responsible for any damages caused as a result of such weather. Weather-related
damage, or damage as a result of the Table not being stored properly when not in use is not the
responsibility of the manufacturer.
During extended periods of non-usage, off season, or in inclement weather (wind, rain, snow, hail,
sleet), freezing conditions and extreme heat, the Table needs to be stored in a dry sheltered place to
prolong the life and to avoid damage to the Table.
2
IMPORTANT WARNING:
Unpack the box on a clean soft level surface and make sure all parts have been included.
If you have any questions or concerns, please visit our website at: www.yotrioint.com
or toll free at: 1-866-905-4107 Monday-Friday 8:30 am to 5:00 am pacific standard time / 11:30 am to 8:00 pm eastern standard time.
WARRANTY:
This Table comes with a one year limited warranty against original manufacture defects. If you experience
trouble with your table, please call the customer service number below.
Toll Free at: 1-866-905-4107 Monday-Friday 8:30 am to 5:00 am pacific standard time / 11:30 am to 8:00 pm eastern standard time.
before you begin
1. Check for damage or missing parts. Call 1-866-905-4107 or email at [email protected] to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. All tools needed for assembly are already included.
For longer life, cover and store when not in use.
Frame Care:
Wipe clean with damp cloth. Use only mild soap and detergents.
or email us at: [email protected]
Or email us at: [email protected]

table of contents
introduction
hardware
parts list
assembly
2
4
5
6-8
QUESTIONS? 3
Please call 1-866-905-4107 parts and service. For faster service, have the style nember and SKU number ready when calling.

hardware
4
(Part D)×8
M6*25mm bolt with washer
(Part F)×1
allen wrench
(Part E)×8
M6*30mm bolt with washer

ITEM DESCRIPTION QUANTITY
1
A
5
top
B
C
leg
connector bracket
4
1

6
step 01:
(Part E)×8
M6*30mm bolt with washer
(Part F)×1
allen wrench
ATTENTION: To avoid damage to your new patio furniture, please
use either the carton or another soft surface such as carpet as a
working surface to prevent product damage during assembly.
1. Attach the leg (B) to the top (A) by lining up the bolt holes.
2. Secure with M6*30mm bolt with washer (E) using allen wrench (F).
3. Repeat above step until the 4 legs (B) are secured to the top (A).
Do not completely tighten screws until all screws are in place.
A
B
EE

7
step 02:
(Part D)×8
M6*25mm bolt with washer
(Part F)×1
allen wrench
Do not completely tighten screws until all screws are in place.
1. Attach the connector bracket (C) to the leg (B) by lining up the bolt holes.
2. Secure with M6*25mm bolt with washer (D) using allen wrench (F).
3. Repeat above step until the 4 legs (B) are secured with the connector bracket (C).
B
D
D
C

step 03
1. Tighten all the bolts.
2. Turn the chair to upright position onto a flat level surface.
You are now ready to enjoy your new chat table.
8