Band-it A92079 User manual

BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Document # A92051 rev. H
© Copyright
BAND-IT-IDEX, Inc. 2006
All rights reserved
www.BAND-IT-IDEX.com
Page 1 of 4
A92079
Tie-Lok II Tool
Warning:
Always wear safety glasses when operating hand tool.
Instructions:
1. Turn tension adjustment knob until
desired tension setting is displayed in
tension indicator window. Space
between numbers counts as one-half
setting. See step 6.
2. Extend handle open to release gripping
mechanism and insert clamp tail into tool
through front load entry.
3. Squeeze handle repeatedly to tighten
band around object. Be sure to release
handle completely to use full pull-up
stroke of tool. Buckle must be secure
against the tool head and nestled
between the two retention clips. Once
the preset tension has been reached, the
handle will no longer release completely.
4. To cut-off excess clamp tail, squeeze
handle one last time.
5. The tool must be reset by, extending the
handle out until it snaps into place, the
tool will be ready to apply the next
clamp.
6. Tension Setting Range:
.250 Smooth I.D. Tie-Lok 0 – 8
Operating
Instructions
Tension Indicator
Window
Handle
Tension
Adjustment
Knob

BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Document # A92051 rev. H
© Copyright
BAND-IT-IDEX, Inc. 2006
All rights reserved
www.BAND-IT-IDEX.com
Page 2 of 4
A92079
Tie-Lok II Tool
Repair Parts
2
3
4
5
6
7, 32
8
9
17
16, 32
15
See list of tool
head parts on
next page
14, 32
1
13
18, 3227, 34
11
cut-off link and pin
shown as a
reference from
next page
22, 31
23, 32, 33
24, 34
28, 34
10
21
29
25, 34
14, 32
26 12
20
19

BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Document # A92051 rev. H
© Copyright
BAND-IT-IDEX, Inc. 2006
All rights reserved
www.BAND-IT-IDEX.com
Page 3 of 4
A92079
Tie-Lok II Tool
Repair Parts
Refer to website for warranty information: http://www.band-it-idex.com/warranty.html
Covered under US Patent #5743310
46 45
41, 32
42
43, 34
44
50
43, 34
48
49, 32
47
Partial view of pull-up
lever and spring shown
as a reference from
previous page 35
36
37, 32
38, 32
38, 32 39, 32
40, 32
51

BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Document # A92051 rev. H
© Copyright
BAND-IT-IDEX, Inc. 2006
All rights reserved
www.BAND-IT-IDEX.com
Page 4 of 4
A92079
Tie-Lok II Tool
Repair Parts
Item Band-It # Qty Description
1 M53387 1 Knob, adjustment
2 M53287 1 Bearing, thrust (3 pieces)
3 A92577 1 Cap, tension
4 A93487 1 Block, tension
5 A93587 1 Indicator, tension
6 A92387 1 Decal, tension indicator
7 K02187 1 Spring, die
8 A91787 1 Spring, extension
9 A95487 1 Link, tension
10 A92267 2 Arm, tension
11 A95387 2 Plate, tension
12 K93487 1 Body, left, black
13 A91477 2 Plate, body
14 A73587 3 Pin, dowel, 5/32 x 9/16 lg
15 A91387 1 Lever, pull-up, front load
16 A94887 2 Pin, straight, 3/16 x .780 lg
17 A91187 1 Gripper, pull
18 K97487 1 Pin, .125 x .313 lg
19 A93887 1 Spring,1/8 x 5/8, 25#
20 A92487 1 Plunger, tension
21 K97587 1 Handle
22 M50387 1 Grip, textured, blue
23 A94488 1 Screw, set, #10-24 x 2.00 lg
24 A85687 1 Screw, set, #6-32 x 7/16 lg
25 A96087 1 Screw, flt-hd, #6-32 x 3/4 lg
26 K93587 1 Body, right, black
27 A91987 6 Screw, flt-hd, #6-32 x 1/4 lg
28 M54587 4 Screw, cap, #6-32 x 1/4 lg
29 K57887 2 Pad, centering
30
31 - - Adhesive, cyanoacrylate
32 - - Grease, extreme pressure
33 - - Red Loctite (high strength)
34 - - Blue Loctite (med. strength)
35 A92177 1 Link, cut-off
36 A94987 2 Lever, cut-off
37 A94687 1 Pin, straight, 1/8 x 3/16 lg
38 M01887 2 Pin, dowel, 1/8 x 7/16 lg
39 A97187 1 Knife, Tie-Lok II
40 A94587 1 Pin, dowel, 1/16 x 1/4 lg
41 A91887 1 Dimple punch
42 A94287 1 Clip, left
43 A49787 2 Screw, cap, #4-40 x 1/8
44 A93977 1 Pin, Groove, 1/8 x 9/16 lg
45 A92677 1 Tool head
46 A93677 1 Blade, Tie-Lok II
47 A94387 1 Clip, right
48 C09587 1 Spring, 1/8 x 1/2, 13#
49 A84487 1 Pin, dowel, 1/8 x 1/2 lg
50 A91287 1 Gripper, hold
51 A90987 1 Pin, spiral. 1/8 x 1/2 lg