Baumatic BSO612SS User manual

1
User Manual for your
BSO612SS/BL/W
60 cm Fan Oven

User Manual for your Baumatic
BSO612SS/BL/W
60 cm Fan oven
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference; for
you or any person not familiar with the operation of the appliance.
GS 25/07/2012
2

3
Contents
Environmental note 4
Important safety information 5 - 7
Specifications 8 - 10
Product and aperture dimensions 8
Productspecifications 8
Standardaccessories 8
Electricaldetails 9
Coolingfan 9
Controlpanel 10
Setting and using the oven 10-11
Selecting manual operation mode 10
Setting the minute minder function 11
Selecting a cooking function and temperature 11-15
Beforefirstuse 11
Selectinganovenfunction 12
Ovenfunctions 12
Thermostatcontrolknob 13
Oven operating light 13
Cooking guidelines 13
Warnings 14
Shelfpositions 15
Cleaning and maintenance 15-18
Replacing the oven bulb 16
Removing the oven door for cleaning 17
Removing the inner door glass for cleaning 18
Installation 19-22
Electricalconnection 19
Installing the oven into the kitchen cabinet 20
Positioningtheappliance 20
Ventilationrequirements 21
My appliance isn’t working correctly 22-24
Cooking Guidelines 25
Baumatic consumables 26
Contact details 27

Environmental note
oThe packaging materials that Baumatic uses are environmentally
friendly and can be recycled.
all packaging material with due regard for the
environment.
oPlease discard
4

5
IMPORTANT SAFETY INFORMATION
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If you
are unsure of any of the information contained in this
booklet, please contact the Baumatic Customer Care
epartment.
eneral Information
ambient temperature
scolouration at
han 4mm to the appliance, will be the
nt of Baumatic Ltd will
Guarantee. The foregoing does not
affect your statutory rights.
atic service
arning and safety instructions
e hot during use and retain heat after
n.
D
G
oThis appliance is designed for domestic household use and can
be built into a standard kitchen cabinet or housing unit.
oIMPORTANT: The adjacent furniture or housing and all
materials used in the installation must be able to withstand a
minimum temperature of 85°C above the
of the room it is located in, whilst in use.
oCertain types of vinyl or laminate kitchen furniture are
particularly prone to heat damage or di
temperatures below the guidelines given above.
oAny damage caused by the appliance being installed in
contravention of this temperature limit, or by placing adjacent
cabinet materials closer t
liability of the owner.
oThe use of this appliance for any other purpose or in any other
environment without the express agreeme
invalidate any warranty or liability claim.
oYour new appliance is guaranteed against electrical or
mechanical defects, subject to certain exclusions that are noted
in Baumatic’s Conditions Of
oRepairs may only be carried out by Baum
engineers or their authorised service agents.
W
oThis appliance complies with all current European safety
legislation. Baumatic does wish to emphasise that this
compliance does not remove the fact that the appliance surfaces
will becom
operatio

6
babies and young children
are prevented from being near to the appliance and not allowed
ssary for younger family members to be in the
kitchen, please ensure that they are kept under close supervision
heavy objects on the oven door or lean on the
oven door when it is open, as this can cause damage to the oven
oDo not place pans or baking trays directly on the base of the
oDo not allow electrical fittings or cables to come into contact
oDo not use the appliance to heat the room it is located in or to
y using the
oven door or handle, as this may cause damage to the appliance
sult in injury to the person lifting the appliance.
Great care should be taken whilst using this appliance and when
oIMPORTANT: The appliance must be disconnected from the
mains before following the cleaning procedure.
Child Safety
oBaumatic strongly recommend that
to touch the appliance at any time.
oIf it is nece
at all times.
General Safety
oDo not place
door hinges.
oDo not leave heated oil or fat unattended, as this is a fire risk.
oven cavity, or line it with aluminium foil.
with areas on the appliance that get hot.
dry clothing.
oDo not install the appliance next to curtains or soft furnishings.
oDo not attempt to lift or move cooking appliances b
or re
Cleaning
oCleaning of the oven should be carried out on a regular basis.
ofollowing the cleaning procedure.

7
nstallation
pliance must be correctly installed by a
d person, strictly in accordance
e manufacturer’s instructions.
sibility for injury or
damage, to person or property, as a result of improper
ventilated. If the appliance is going to be used for
prolonged periods of time, then additional ventilation may be
oPlease consult with your qualified installer if you are in any doubt
ntilation that you will require.
uropean Directives:
C regarding “electromagnetic disturbances”
-Regulation (EC) N° 1935/2004 regarding “materials in contact
oThe above directives comply with 93/68/EEC regarding CE
in
accordance with the standards currently in force. This appliance
must be used by a trained person for domestic purposes only.
I
This ap
suitably qualifie
with th
oBaumatic Ltd declines any respon
use or installation of this appliance.
oHeat, steam and moisture will be created during use of the
appliance, take care to avoid injury and ensure that the room is
adequately
required.
about the amount of ve
Declaration of conformity
This appliance complies with the following E
-2006/95/EC regarding “low voltage”
-2004/108/E
with food”
marking.
oThe manufacturer declares that the oven is built using certified
materials and requires the appliance to be installed

8
pecificS ations
Product Aperture DimensioDimensions
ns
mm
550 mm (min)
ing (BSO612SS only)
baking tray
ne
Height: 590 mm 583 mm – 585 mm
Width: 595 mm 560
Depth: 550 mm
Product specifications
o4 oven functions
oEnergy efficiency class: A
oOven gross capacity: 59 litres
Oven net capacity: 50 litreso
oMinute minder
oCoolingfan
Double-glazed removable dooro
oRemovable inner door glass
oMark resistant coat
Standard accessories
oety shelves
oEnamelled
2 x Saf
oTrivet
ptional extraO
oBPS2 Pizza sto

9
Rated Voltage: ble pole switched fused
m contact gap)
:
ains Supply Lead: 3 x 1.5mm²
ven Light Bulb: 25 W/300°C screw type pygmy
ted inside of this appliance, to make
the internal temperature of the oven stable and the external
time afterwards.
The length of time will depend on how long the oven has been
switched on for and at how high a temperature.
les invoice. The rating plate for your oven can be
cated by opening the oven door and looking around the outer edge of
e oven chassis.
odel Number ……………………………….
erial Number ……………………………….
ate of Purchase ……………………………….
Electrical details
220-240 Vac 50 Hz
Supply Connection: 13A (dou
outlet with 3m
Max Rated Inputs 2.35 kW
M
O
Cooling fan
oA tangential cooling fan is fit
surface temperature lower.
oAfter you have finished cooking and switched off the oven, the
cooling fan will continue to run for a period of
For future reference please record the following information which can
be found on the rating plate and the date of purchase which can be
found on your sa
lo
th
M
S
D

Control Panel
10
ob
knob
ob
) Power indicator light
) Oven operating light
1) Oven function selector kn
2) Minute minder control
3) Thermostat control kn
4
5
Setting and using the oven
Selecting manual operation mode
Before you can select a cooking function or set a temperature,
ou must set the appliance eration mode.
oTurn the minute minder control knob (2) anti-clockwise, so that
it points at the word ON.
yinto manual op

11
e using the minute minder function and an alarm
ill sound when this period of time has elapsed and the oven
oThe minute minder can be used independently of an oven
oTo set the timer, turn the minute minder control knob clockwise
oDO NOT turn the minute minder control knob past the 120
oDO NOT turn the minute minder control knob anti-clockwise past
that has been set will expire when the control
knob reaches zero, a brief audible signal will sound and the oven
h off.
der control knob anti-clockwise, so that it
oints at the word ON. Otherwise the main oven will
not work.
ing function and temperature
Setting the minute minder function
You are able to set the minute minder at any time, regardless
of whether an oven function has been selected. You can set a
period of tim
w
will turn off.
cooking function for a time period of up to 120 minutes.
to the required countdown time.
minute marking.
the word ON.
oThe time period
will switc
Before you next use the oven, you MUST turn the
minute min
p
okSelecting a co
manufacturing process, you should select the fan oven
function and set the thermostat to its maximum temperature
oIt is perfectly normal for a smell to be produced during this
oYou should make sure that any windows in the room are left
oIt is advisable for you not to remain in the room whilst the
Before first use
oTo remove any residue from the oven that may have been left
from the
setting.
process.
open during this process.
burning off process is taking place.

12
oYou should leave the oven on maximum setting for 30 – 40
n be cleaned with
warm soapy water, using either a sponge or soft cloth. No
he oven should be cleaned with warm soapy
water, using either a sponge or soft cloth. No abrasive cleaners
appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
nly).
ithin the oven cavity, depending on the oven function that
ou select. When a function is selected, the power indicator light will
Oven functions
VEN LIGHT: Separate light control which allows the light to
e
defrost
the room temperature, the quantity
and type of food. Always check food packaging for the
nt
faster
ed simultaneously on different shelves,
preventing the transmission of smells and tastes from one dish
ment, which directs heat downwards onto
the food. This function is suitable for grilling small portions of
bacon, toast and meat etc.
minutes.
oAfter the oven cavity has cooled, it should the
abrasive cleaners should be used.
oOuter parts of t
should be used.
oWe would recommend that an
appliance (BSO612SS o
Selecting an oven function
The oven function selector knob should be used to select the particular
mode of cooking that you require. The appliance will utilise different
elements w
y
come on.
O
be switched on, even when the oven is not cooking.
DEFROST MODE: The fan runs without heat to reduce th
defrosting time of frozen foods. The time required to
the food will depend on
defrosting instructions.
FAN OVEN: This method of cooking uses the circular eleme
while the heat is distributed by the fan. This results in a
and more economical cooking process. The fan oven allows
food to be cook
onto another.
HALF GRILL: This method of cooking utilises the inner part
only of the top ele

13
n b
e oven. It
is possible to regulate the temperature
oTurn the control knob clockwise.
Oven operating light
en’s
n the thermostat
control knob has been reached. It will cycle on and off
throughout the cooking time.
ou should not place food inside the cavity, until the
correct cooking temperature has been reached.
times. Once familiar with
the performance of your appliance, temperatures and times can
he fan oven function, then you should follow
the information given on the food packaging for this particular
using the fan oven mode; however you should extend
the cooking time given on the food packaging by at least ten
oIMPORTANT: You should ALWAYS pre-heat the oven if you are
can generally reduce the
Thermostat control k
o
oThe oven thermostat control knob sets
the required temperature of th
within a range of 50 - 250°C.
oThis light will come on to indicate that the ov
heating elements are in operation. The light will turn
off when the temperature set o
Y
Cooking guidelines
oPlease refer to the information given on food packaging for
guidance on cooking temperatures and
be varied to suit personal preference.
oIf you are using t
mode of cooking.
oYou should pre-heat the oven and not place food inside of it until
the oven operating light has gone off. You can choose not to pre-
heat when
minutes.
baking.
oIf there is no guidance given on the food packaging specifically
for cooking in fan oven mode, you

14
cooking time and temperature by 10% from the information
cooking, unless the instructions on the food packaging advise
oBefore cooking, check that any accessories that are not required
oPlace cooking trays in the centre of the oven and leave gaps
w the dishes.
en light will remain on during cooking.
oKeep the oven door closed when using ALL oven functions,
heat items wrapped in aluminium foil under the grill. The high
oYou should also never line the base of your oven with aluminium
ing, never place pans or cookware directly onto the
bottom of your oven. They should always be placed on the shelf
t becomes extremely hot during
operation, avoid touching it inadvertently when handling the
oImportant: Be careful when opening the door, to avoid contact
with hot parts and steam.
given for conventional oven cooking.
oMake sure that frozen foods are thoroughly thawed before
that you can “cook from frozen”.
are removed from the oven.
between the trays to allow air to circulate.
oTry to open the door as little as possible to vie
oThe ov
Warnings
including the grill function.
oDo not use aluminium foil to cover the enamelled baking tray or
reflectivity of the foil could potentially damage the grill element.
foil.
oDuring cook
provided.
oThe grill heating elemen
food which you are grilling.

15
helf positions
Your oven will come supplied with
the following oven furniture:
(A) Safety shelf (x2)
(B) Enamelled baking tray
oYou should use the shelf position(s) that you find are best suited
to your personal cooking preferences.
n
S
oThe numbers 1 – 4, indicate the different shelf positions that you
can utilise within the oven.
Cleaning a d maintenance
Cleaning operations must only be carried out
when the oven is cool.
The appliance should be disconnected from your
mains supply before commencing any cleaning
time and after each use. This will avoid residual food
stuffs becoming baked on the oven cavity. After residues have
e difficult to
remove.
The oven cavity should only be cleaned with warm soapy water,
these splashes occur
being placed in cookware that is too small.
process.
oThe oven should be thoroughly cleaned before it is operated for
the first
been baked on several times, they are far mor
oNever clean the oven surfaces by steam cleaning.
ousing either a sponge or soft cloth. No abrasive cleaners should
be used.
oAny stains that may appear on the bottom of the oven will have
originated from food splashes or spilt food,
during the cooking process. These could possibly be a result of
the food being cooked at an excessively high temperature or

16
You
should also ensure that the food is placed in an adequately sized
e oven should only be cleaned with warm soapy
water, using either a sponge or soft cloth. No abrasive cleaners
appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
on your appliance, then you
must check with the manufacturer of the cleaner that it is
will not be fixed by the manufacturer free of
charge, even if the appliance is within the guarantee
period.
Replacing the oven bulb
disconnected from
our mains supply before you attempt to either
remove or replace the oven bulb.
oRemove the light cover by turning it anti-
oUnscrew the bulb clockwise and remove it from its
oReplace the bulb with a 25 W/300°C, screw type
oPlace the lamp cover back into position.
oYou should make sure that the cooking temperature that is
selected is appropriate for the food that you are cooking.
dish and use the enamelled baking tray where appropriate.
oOuter parts of th
should be used.
oWe would recommend that an
appliance (BSO612SS only).
oIf you use any form of oven cleaner
suitable for use on your appliance.
oAny damage that is caused to the appliance by a cleaning
product
IMPORTANT: The oven must be
y
oRemove the oven shelf and the drip tray.
clockwise.
holder.
pygmy.
oDo not use any other type of bulb.

17
emoving the oven do
o facilitate the cleaning of the inside of the oven and the outer frame
oIf you raise both of the movable bolts (B), then the hinges (A)
door at the centre and then
incline it slightly towards the oven cavity and then pull the door
ake sure that the door is supported
at all times and that you place the door on some padded
l amount of detergent. The cloth MUST
NOT have come into contact with any form of cleaning product
oTo refit the door you should slide the hinges back into their slots
oIMPORTANT: The movable bolts (B) must be closed back into
their original positions before closing the door.
system when removing the door,
as the hinge mechanism has a strong
oDo not immerse the door in water at any
time.
R or for cleaning
T
of the oven, the door can be removed as follows:-
oThe hinges (A) have two movable bolts on them (B).
are released from the oven housing.
oYou should grip the sides of the
gently away from the oven cavity.
oIMPORTANT: You should m
material whilst cleaning it.
oThe oven door and door glass should only be cleaned using a
damp cloth and a smal
or chemical previously.
and open the door fully.
oTake care not to dislodge the hinge
locking
spring.

Removing the inner door glass for cleaning
18
Remember that if the surface of the glass panel becomes scratched,
o not raise the panel more than 35° as it can damage the
The securing clips at the top and bottom of the glass panel will pop
en pulling the
ottom of the glass panel upwards, then pull the top of the
ectly back into the door in
the reverse order. nd
panel of glass is removed
om so you can reassemble the door correctly. Do not mix the
ange the order.
oDo not use any abrasive cleaner that could cause damage.
othis could lead to a dangerous failure.
oTo facilitate cleaning, the inner door glass can be lifted out.
Grip the top and the bottom of the inner door glass panel.
Gently pull the bottom of the inner door glass panel upwards.
D
securing clips.
out and the glass panel will be free to remove.
If the top securing clips do not pop out wh
b
glass panel upwards until the top also pops out.
After cleaning, insert the glass panel corr
Ensure the securing clips slot back into place a
the glass panel locks into place securely.
IMPORTANT: Remember where the
fr
glasses up or rearr

INSTALLATION
The installation must be carried out by a suitably
the Scottish Development
rk Regulations.
nnecting the appliance, make sure that the supply voltage
essible position adjacent to the appliance. The spur
outlet must still be accessible even when your oven is located in
its housing.
n it must be replaced
by an appropriate replacement which can be obtained from the
Spares Department.
19
qualified person, in accordance with the current
version of the following.
oUK Regulations and Safety Standards or their European
Norm Replacements.
oBuilding Regulations (issued by the Department of the
Environment).
oBuilding Standards (issued by
Department).
oIEE Wiring Regulations.
oElectricity At Wo
Electrical connection
Before co
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
oThis appliance should be wired into a 13A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily acc
oTo connect the oven power cord, loosen and remove the cover
on the terminal block, in order to gain access to the contacts
inside. Make the connection, securing the cord in place with the
cable clamp provided and then immediately close the terminal
block cover again.
oIf you have to change the oven power cord, the earthing
(yellow/green) conductor must always be 10 mm longer than the
line conductors.
oCare must be taken to ensure that the temperature of the mains
supply cable does not exceed 50°C.
oIf the mains supply cable is damaged, the

20
nstalling the oven into the kitchen cabinet
oEnsure that the aperture that you will be fitting the oven into is
ust be fitted into an oven housing with the ventilation
cut-outs shown in the “Ventilation requirements” section on the
oEnsure that the rear panel of the furniture housing unit has been
removed.
I
Positioning the appliance
of the size given in the above diagram.
oThe oven m
next page.