BDI LINEA 6222 User manual

LINEA™6222
CONSOLE DESK
DESIGN MATTHEW WEATHERLY
INSTRUCTION MANUAL

BDIUSA.COM | 3NEED ASSISTANCE? [e-mail]
Congratulations on the purchase of your Linea Console Desk 6222 from BDI. Your desk
has been designed to provide a lifetime of enjoyment. This manual will provide you with
assembly instructions and other helpful information that will ensure that you get the
most out of your product. Please save it for future reference.
Your Linea Console Desk has been engineered for simple assembly. Please follow these
directions carefully to prevent any damage.
Should you need further assistance, contact BDI at [e-mail].
ENJOY!

4 | BDIUSA.COM LINEA 6222
PART # C1
DESCRIPTION Desktop Assemby
QUANTITY 1
HARDWARE AND COMPONENTS
PART # T1
DESCRIPTION Hex Wrench
QUANTITY 1
PART # H2
DESCRIPTION M6 Screw x 16mm
QUANTITY 6
PART # H1
DESCRIPTION M6 x 10mm Screw
QUANTITY 4
HARDWARE AND COMPONENTS
Unpack and identify the parts listed below. The assembly workspace should be a non-marring
surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at
[e-mail].
Do not use power tools for the assembly of this product.
For all other concerns, please contact your BDI retailer.

PART # C4
DESCRIPTION Drawer Liner
QUANTITY 1
PART # C2
DESCRIPTION Leg Frame – Left
QUANTITY 1
PART # C3
DESCRIPTION Leg Frame – Right
QUANTITY 1
BDIUSA.COM | 5NEED ASSISTANCE? [e-mail]
HARDWARE AND COMPONENTS
PART # C5
DESCRIPTION Wire Management Extrusion
QUANTITY 1

6 | BDIUSA.COM LINEA 6222
Carefully position (C1) Desktop Assembly upside
down. Open the drawer partway to allow more
room for assembly.
Slide metal tab of (C2) Left Leg Frame into the
end of the (C1) Desktop Assembly back rail.
Attach using 2 (H1) M6 Screws and partially
tighten with (T1) Hex Wrench.
NOTE: Do not tighten until all screws are in place.
STEP 1. ATTACH LEFT LEG FRAMEASSEMBLY
C2
C1
PART/DESCRIPTION QTY
T1-HEX WRENCH 1
H1-SCREW 2
C2
C1
H1
H1
C2
Open drawer partway
Desk Assembly back rail

BDIUSA.COM | 7NEED ASSISTANCE? [e-mail]
ASSEMBLY
STEP 2. ATTACH RIGHT LEG FRAME
Slide metal tab of (C3) Right Leg Frame into the
opposite end of (C1) Desktop Assembly back rail
as shown.
Attach using 2 (H1) M6 Screws and partially
tighten with (T1) Hex Wrench.
NOTE: Do not tighten until all screws are in place.
PART/DESCRIPTION QTY
T1-HEX WRENCH 1
H1-SCREW 2
C3
C3
H1
H1
C3
C2

8 | BDIUSA.COM LINEA 6222
Using 6 (H2) Screws, fasten the legs to the
(C1) Desktop Assembly threaded holes on the
underside of the desk. Tighten with (T1) Hex
Wrench.
You may now tighten all screws.
PART/DESCRIPTION QTY
T1-HEX WRENCH 1
H2-SCREW 6
STEP 3. ATTACH DESKTOP ASSEMBLYASSEMBLY
C1
H2
H2
H2
H2
H2
H2

BDIUSA.COM | 9NEED ASSISTANCE? [e-mail]
ASSEMBLY
ASSEMBLY
STEP 4. INSERT DRAWER LINER
STEP 5. INSTALL WIRE MANAGEMENT EXTRUSION—OPTIONAL
With help from another person, carefully position your Linea Console desk onto its base, making sure
the drawer remains closed. Once the desk is upright, open the drawer and install the (C4) Drawer Liner.
2 PERSON TASK
C4
C5
Install the (C5) Wire Management Extrusion on the leg of your choice.

10 | BDIUSA.COM LINEA 6222
FINE TUNING
Your Linea Console is equipped with built-in levelers. Dial down one or more levelers (by hand) until
you attain a level stance.
LEVEL DESK
Dial down