BDI LINQ 9181 User manual

LINQ™9181 & 9182
NIGHTSTANDS
DESIGNED BY MATTHEW WEATHERLY
LET’S GET STARTED.
INSTRUCTION MANUAL
9181 9182

Congratulations on the purchase of your LINQ Nightstand 9181 | 9182 from BDI. Your
nightstand has been designed to provide a lifetime of enjoyment. This manual will
provide assembly instructions and other helpful information to ensure you get the
most out of your product. Please save it for future reference.
Your LINQ Nightstand has been engineered for simple assembly. Please follow these
directions carefully to prevent any damage.
Should you need further assistance, contact BDI at customerservic[email protected]om.
ENJOY!

BDIUSA.COM | 3NEED ASSISTANCE? [e-mail]
M6 x 16 Screw (H1) QTY: 8
Spanner (C1) QTY: 2
Cabinet (C3) QTY: 1
M6 x 80 Screw (H2) QTY: 6
Leg (C2) QTY: 2
Drawer Pull (C4) QTY: 1
M4 x 35 Screw (H3) QTY: 2
Leveler Wrench (T2) QTY: 1 Phillips Screwdriver
TOOL REQUIRED (NOT INCLUDED)
HARDWARE AND COMPONENTS HARDWARE AND COMPONENTS
Unpack and identify the parts listed below. The assembly workspace should be a non-marring
surface, such as carpet. For missing hardware pieces, please contact BDI Customer Service at
customerservic[email protected]om. For all other concerns, please contact your BDI retailer.
Do not use power tools for the assembly of this product.
Hex Wrench (T1) QTY: 1
9182 shown

4 | BDIUSA.COM LINQ 9181 & 9182
Lay the Spanners (C1) on a soft, non-marring
surface, like carpet. Attach the Legs (C2) to the
Spanners (C1) using 8 Screws (H1) and tighten
with Hex Wrench (T1).
Lay the Cabinet (C3) on a soft, non-marring
surface, like carpet. Attach the Base to the
Cabinet (C3) using 6 Screws (H2). Tighten with
Hex Wrench (H1).
HEX WRENCH – T1 QTY
1
SCREW – H1 QTY
8
HEX WRENCH – T1 QTY
1
SCREW – H2 QTY
6
H1
H1
H1
H1
C1
C1
C2
C2
STEP 1. ASSEMBLE BASE
STEP 2. ATTACH BASE TO CABINET
ASSEMBLY
ASSEMBLY
H2
C3
H2
H2
H2
H2
H2

BDIUSA.COM | 5NEED ASSISTANCE? [e-mail]
ASSEMBLY
STEP 3. INSTALL DRAWER PULL
With the help of another person, carefully turn
the Side Table onto its feet. Open the drawer
and connect the Drawer Pull (C4) with 2 Screws
(H3). Tighten with Phillips Head Screwdriver
(not included).
NOT INCLUDED
PHILLIPS SCREWDRIVER
QTY
1
SCREW – H3 QTY
2
Remove the thumb screws on the
underside of the top panel.
H3
C4

6 | BDIUSA.COM LINQ 9181 & 9182
FINE TUNING LEVEL NIGHTSTAND
Make sure the cabinet is level. Adjust one or
more of the levelers using the Leveler Wrench
(T2) to attain a level stance.
PART/DESCRIPTION QTY
LEVELER WRENCH – T2 1
Dial down
T2
Wires can pass under the
pullout tray’s back panel.
Neoprene keeps the wires in
place as the pullout tray
moves.
Wire management slot
in sub panel
9182
9181

BDIUSA.COM | 7NEED ASSISTANCE? [e-mail]
CARE & MAINTENANCE
Your BDI furniture has been constructed with the finest materials, carefully manufactured, and
designed to last a lifetime. Regular furniture care will prolong your enjoyment and keep it looking its
best. Here are some general tips for taking care of BDI furniture. Your surfaces may vary.
GLASS
Glass surfaces are maintained using household glass cleaner and a paper towel or cloth.
SATIN-ETCHED GLASS
This uniquely smooth-to-the-touch glass surface can be regularly maintained using household glass
cleaner and a paper towel or cloth.
A ‘Magic Eraser’ removes minor scratches or scuffs not eliminated using a paper towel or cloth. ‘Magic
Eraser’ is a melamine foam product available at any grocery store or home improvement center.
Dampen the entire glass surface and the Magic Eraser, then rub the whole surface in broad, even
strokes using moderate pressure. Clean and dry the surface with a paper towel. Check for results and
repeat as necessary. Any scratches or scuffing not eliminated by one of the above methods can often
be addressed by ‘refreshing’ the glass. This process should not be required more than once per
6–12 months. See this brief video for the simple method: www.bdiusa.com/glass
WOOD
Wood surfaces should be cleaned with a slightly damp (not saturated) cloth or paper towel. Do not
use glass cleaner on wood. If moisture remains, dry the surface with another cloth. If needed, a gentle,
non-abrasive cleanser may be used, but wipe away all cleaner residue and dry the surface with a cloth.
BDI’s wood finishes feature natural hardwood solids and veneers. Wood is a product of nature and—
unlike man-made materials that can be manufactured to strict and consistent specifications—has
natural imperfections that are part of its appeal and character. Every piece of wood differs from every
other, even when coming from the very same tree. As such, grain, texture, and tone variation should
be expected from one panel or piece of furniture to the next.
While BDI’s stained wood finishes are stable in tone & appearance, all finishes are subject to some
degree of discoloration with prolonged exposure to direct sunlight. Please avoid positioning your BDI
cabinet in any area with ample direct sunlight. To learn more about the features of natural wood, visit
www.bdiusa.com/wood
METAL, PORCELAIN, & PAINTED SURFACES
Surfaces should be cleaned with a slightly damp (not saturated) cloth or paper towel. If moisture
remains, dry the surface with another cloth. If needed, a gentle, non-abrasive cleanser may be used,
but be sure to wipe away all cleaner residue and dry the surface with a cloth.

These distinctive product configurations are protected by US and international patents, trade
dress, and/or copyright laws. LINQ & BDI are trademarks of Becker Designed, Inc. All rights
reserved. ©2023, BDI | V.03.20.2023
Made in Vietnam.
WARRANTY
PRODUCT REGISTRATION
BDI warrants to the original purchaser that for the below-stated warranty term, BDI will repair or
replace any product, part, or component covered by this warranty that fails under everyday use due
to a defect in material or workmanship. BDI will repair or replace the product mentioned above, part,
or component with a comparable product, part, or component. The decision to repair or replace will
be at BDI’s sole discretion.
BDI furniture is warranted for three (3) years from the date of purchase, as shown on your sales
receipt. The warranty period starts from the date of purchase. This warranty extends only to the
original purchasers who acquire new products from BDI Authorized Resellers. To be eligible for
warranty coverage, any product, part, or component must have been assembled, installed, used, and
maintained according to BDI’s published instructions. Any modification to the original product voids
the warranty.
To view BDI’s complete warranty information, visit www.bdiusa.com/warranty
Registering your new BDI product allows us to send you important product updates, service
information, and helpful hints related to your BDI products. Register today, and you will be entered to
win free a BINK table from BDI: www.bdiusa.com/register