Bea-fon S10 User manual

User Manual
Bea-fon S10 English

Product safety information
Please read these simple guidelines. Not following them may be dangerous or
illegal
Switch off the phone in the vicinity of chemical plants, gas stations and other
locations containing explosive objects.
Keep the phone far away from children.
When driving, please use the hands free calling device (purchased separately) to
ensure safety. Please park the car at roadside for communication unless in
emergency.
Switch off the phone when boarding an airplane and do not switch the phone on
during the flight.
Be careful when using the mobile phone in the vicinity of such devices as
pacemakers, hearing aids and other electro-medical equipment, which may be
interfered by the mobile phone.
No guarantee for the accessories and parts not produced by the original factory.
Never attempt to disassemble the phone by yourself. Contact the supplier in case
of any trouble with your mobile phone.
Do not recharge the phone without battery being installed.
Charge the phone in well-ventilated environment and keep away from
inflammable and high explosive articles.
To avoid demagnetization, keep the handset away from magnetic substances,
such as magnetic discs or credit cards.
Keep the phone away from liquid. If soaking or erosion occurs, take the battery
out and contact the supplier.
Avoid using the phone in too high or too low temperature environments. Never
leave the phone exposed under direct sunlight, in high humidity or in a dusty
environment.
Do not use liquid or a damp cloth with strong detergents to clean the handset.

Your phone
Earpiece
Display
Love key
Press it to enter the love
number.
Right soft key
Delete key
End / Power key
Up / Down key
In standby mode, press to
change ring tone volume.
# Key
In standby mode, long press
it to switch the user profiles.
In editor, press to change
input method.
ӿKey
In standby mode, press it to input ӿ / + / p / w
In editor, press to input symbols.
Menu key
Perform the function indicated
at the bottom of the display.
Send key
Dial a phone number or
answer a call. In standby
mode, shows the history of
calls made, received and
missed.
Number key
In standby mode, press to
input numbers; Long press 2-9
to speed dial; In editor, press
them to input numbers or
words. In standby mode,
press and hold the 0 key to
on/off the audiphones.

Screen Icons
Signal Indicator, More bars indicates stronger signal.
Alarm clock
Battery Level Indicator
Keypad lock
Handset mode
Missed call(s)
Ring mode
Ring
Vibration Only
Vibration then Ring
Vibration and Ring
Battery
The lithium battery of the mobile phone can be immediately used
after unpacking. A new battery performs best after performing a
full charge/discharge 3 times.
Installing the battery
1. Insert the battery by aligning the gold contacts in the
battery compartment on the phone.
2. Push down on the upper section of the battery until it

clicks into place.
Pull down the battery press the cover
Removing the battery
1. Ensure that your mobile phone is switched off.
2. Remove the battery cover.
3. Pull the battery up and remove it from the mobile phone.
How to insert the SIM card
If you want a mobile Phone that is sophisticated and easy to use
and here it‟s in your hands! Naturally you are eager to star using
it, but first you need to insert the SIM card.
Insert the SIM card as follows:
Ensure that the phone is switched off and charger is
disconnected from the phone.
Turn the phone over and remove the back cover.
If the battery is already inside, remove it!
Hold your SIM card with the cut corner oriented as shown and
then slide it into the card holder face down.
Replace the battery first.

Replace the back cover.
What is a SIM card?
Every mobile phone has a SIM card (Subscriber Identity Module).
This is a micro-chip that holds your personal information such as
names and phone numbers. Your phone won‟t work without it. If
you already have contacts on your SIM card, they can be
transferred in most cases.
How to charge the battery
Your phone is powered by a rechargeable battery.
Connect your travel adapter to the bottom of your mobile
phone or the back of the charger that it has laid the mobile
phone.
Connect the other end of the travel adapter to the mains
socket.
If you are charging the battery when the mobile phone is
switched off, the display will show a large battery icon with
the bars moving from up and down. If charging the battery
when the mobile is switched on, the display will show a

smaller icon.
When the battery is fully charge, disconnect the charger.
Note: Please ensure the battery be charged for 12 hours or more
before its first use.
Power on/off
Ensure that you SIM card is in your mobile phone and that the
battery is charged.
Please hold END key to Power on/off the phone. The phone will
automatically search for the network.
Display information
Besides sending and receiving calls, you can also do:
In the standby mode, press Menu key to enter main Menu.
In the standby mode, press Right soft key to view phone
book list.
In the standby mode, press Send key to enter call list.

Menu tree
1. Phone book
2. Messages
Write message
Inbox
Outbox
Delete all SMS
Use Template
Voice Mail Server
Broadcast
Message
Message Settings
Services
3. Call history
Missed Calls
Dialed Calls
Received Calls
Delete Call Log
Call Time
4. Alarm
5. User profiles
General
Meeting
Outdoor
Indoor
Headset
6. Settings
Time and date
One key help
Phone settings
Call setup
Network Setup
Security setup
Restore Factory
Settings
Write text
Change input mode: press # key to change the input mode (input
modes: ABC, abc, 123)
In the abc / ABC input, press the number keys 2-9 to input letters.
Please input the characters followed the order according to the
letters on the keys. Press the key once to input the first letter,
press it twice to input the second one and so on.
In the 123 input, Press the keys to input the corresponding
numbers.
Input Symbol: Press the “*”key to select the symbol that you
want.
Input Space: Press 0 key to input space, it does not word in 123

mode.
Delete Character: Press Right soft key to clear a character. Press
and hold Right soft key to delete all characters and clear the
display.
Move cursor to left or right: Press the Up/down navigation keys to
move the cursor left or right.
How to add contact to your phone books
There are someone who you want to call again and again so it
makes sense to add these to your phone book. You can then
access these numbers quickly and easily.
Select Menu then phone book.
Press Menu key to view the phone book list, and then select one
to press the Menu key to select Add new entry.
Select whether to save the new contact to your SIM card or to the
phone‟s memory.
Enter the contact‟s phone number.
Press Menu key, then enter a name and confirm by Menu key.
If SIM card is selected to save new contact, you can enter name
and number.
If phone is selected to save the new contact. Name, Number,
Home Number, Company Name, Email Address, Office Number,
Fax Number, birthday, Associate sound to add the content.
To delete someone from your phone book list, first select the

name, then press Menu key and choose Delete.
How to make and receive calls
To most basic way to make a call is to key in the number in the
standby mode and press the send key. One advantage of a mobile
phone is that you can also store people‟s names and numbers in
your mobile phone book and call then more easily.
To call someone:
Select menu then phone book. From here use the Up/down
keys to find the name of the person you want to call. You can
also type in the first letter of the name of the person you want
to call.
Now simply press Send key.
To receive call: press Send key.
To end the call: press End key.
Make sure you are in an area with sufficient coverage to make
calls. The strength of the network signal is indicated on top left
corner or screen.
How to send and receive text messages
You can use your mobile phone to send and receive text
message.
1. Go to Menu→Messages→Write message.
2. Write your message. For more information on writing, see
section „write text‟.
3. Press MENU key and select done to send the message.