Beko TBN5400 User manual

www.beko.com
TBN5400
TBN5502
TBN5500
01M-8835993200-1417-01
Table Blender
User Manual
EN ZH VI TH

Please read this user manual first!
Dear Customer,
Thank you for preferring a Beko product. We hope that you get the best results from
your product which has been manufactured with high quality and state-of-the-art
technology. Therefore, please read this entire user manual and all other accompany-
ing documents carefully before using the product and keep it as a reference for future
use. If you handover the product to someone else, give the user manual as well. Follow
all warnings and information in the user manual.
Meanings of the symbols
Following symbols are used in the various section of this manual:
C
Important nformaton and useful
hnts about usage.
AWARNING:
Warnngs for dangerous
stuatons concernng the safety of lfe
and property.
Suitable for contact with food.
Do not mmerse the applance, power
cable, or power plug n water or any
other lquds.
Protecton class for electrc shock.
Ths product has been produced n envronmentally-frendly, state-of-the-art facltes.
It does not contan PCB.Ths applance conforms to the
WEEE regulaton. Made n P.R.C

3 / EN
Table Blender / User Manual
CONTENTS
ENGLISH 4-16
CHINESE 17-26
VIETNAMESE 27-41
THAI 42-52
01M-8836013200-1417-01
01M-8836433200-1417-01

4 / EN Table Blender / User Manual
1 Important safety and
envronmental nstructons
This section contains safety instructions that will
help protect from risk of personal injury or property
damage.
Failure to follow these instructions invalidates the
granted warranty.
1.1 General safety
•Ths applance comples wth the nternatonal
safety standards.
•Ths applance s ntended to be used n household
and smlar applcatons such as:
– staff ktchen areas n shops, offces and other
workng envronments;
– farm houses;
– by clents n hotels, motels and other resdental
type envronments;
– bed and breakfast type envronments.

5 / EN
Table Blender / User Manual
1 Important safety and
envronmental nstructons
•Ths applance can be used by people who have
lmted physcal, sensory or mental capacty or who
do not have knowledge and experence, provded
that they are supervsed or they understand the
nstructons wth regard to safe use of the product
and potental dangers.
•Chldren should not play wth the applance.
•Cleanng and mantenance works should not be
performed by chldren.
•Ths applance cannot be used by chldren.
•Do not use t f the power cable, blades or the
applance tself s damaged. Contact an authorsed
servce.
•Unplug the applance when left unattended, whle
nstallng/removng accessores or before cleanng.
•Only use the orgnal parts or parts recommended
by the manufacturer.
•Do not attempt to dsmantle the applance.
•Do not operate or place any part of ths applance
or ts parts on or near hot surfaces.
•Do not use the devce for hot food.

6 / EN Table Blender / User Manual
1 Important safety and
envronmental nstructons
•Your mans power supply should comply wth the
nformaton suppled on the ratng plate of the
applance.
•Do not use the applance wth an extenson cord.
•Do not touch the plug of the applance wth damp
or wet hands.
•Do not pull the power cable when unpluggng the
applance.
•Unplug the applance before cleanng, dsassembly,
accessory replacement and wat for t to stop
completely.
•When emptyng the contaner, durng cleanng and
grabbng choppng blades wth bare hands serous
njures could result due to ncorrect use. Use the
plastc secton tryng to hold the choppng blade.
•Never touch blades whle usng the applance.
There s the possblty of njury due to ncorrect
usage.
•After cleanng, dry the applance and all parts
before connectng t to mans supply and before
attachng the parts.

7 / EN
Table Blender / User Manual
1 Important safety and
envronmental nstructons
•Do not mmerse the applance, power cable, or
power plug n water or any other lquds.
•If you keep the packagng materals, store them out
of the reach of chldren.
•Keep the applance and the power cable out of the
reach of chldren.
1.2 Complance wth the WEEE Drectve and
dsposal of waste products
This product does not include harmful and prohibited materials
specified in the “Regulation for Supervision of the Waste Electric
and Electronic Appliances” issued by the Ministry of Environment
and Urban Planning. Complies with the WEEE Regulation. This
appliance has been manufactured with high quality parts and
materials which can be reused and are suitable for recycling. Therefore, do
not dispose the appliance with normal domestic waste at the end of its
service life. Take it to a collection point for the recycling of electrical and
electronic equipment. Ask the local authority in your area for these collec-
tion points. Help protect the environment and natural resources by recy-
cling used products.

8 / EN Table Blender / User Manual
1 Important safety and
envronmental nstructons
1.3 Package nformaton
Package of the product is made of recyclable materials in accord-
ance with our national legislation. Do not dispose of the packag-
ing materials together with the domestic or other wastes. Take
them to the packaging material collection points designated by
the local authorities.
1.4 Thngs to do for energy savng
Cut the solid food into small pieces before placing them in the appliance as
stated in the user manual. Follow the other instructions and times speci-
fied in the manual. Select low speed levels if suitable for the food to be
prepared. Switch off and unplug the appliance after using it.

9 / EN
Table Blender / User Manual
2.1 Overvew
The values whch are declared n the markngs affxed on your product or the other prnted documents suppled wth t
represent the values whch were obtaned n the laboratores pursuant to the pertnent standards. These values may vary
accordng to the usage of the applance and ambent condtons.
2 Your blender
1
2
3/4
5
6
7
8
9
1011121314

10 / EN Table Blender / User Manual
2Your blender
1. Cap/Measuring cup
2. Lid
3. Jug
4. Glass jug (TBN5502)
5. Jug handle
6. Blade unit
7. Motor housing
8. Control dial
9. Non-slip feet
10. Cable storage coil
11. Mxng contaner
12. Choppng blade
13. Frut flter (TBN5400/
TBN5500)
14. Strrer
2.2 Techncal data
Voltage: 220-240V~,50-60Hz
Power: 400 W
Insulation class: II
Technical and design modifications
reserved.

11 / EN
Table Blender / User Manual
3Operaton
3.1 Intended use
This appliance is intended only for
household use; it is not suitable for
professional use.
It is designed to chop small amounts
of vegetables and fruit (strawber-
ries, bananas, etc.).
3.2 Operaton
Clean the appliance parts before
initial use (see 4.1).
Remove all packaging and stick-
ers materials and dispose of them
according to the applicable legal
regulations.
AWARNING:
Do not
operate the appli-
ance when it is emp-
ty or its cover is open.
1. Place your applance on a sold
and flat surface.
2. Now set the jug wth the ope-
nng facng down on a level sur-
face.
3. Assemble the blade unt ca-
refully on the jug by turnng t
clockwse and lftng t by holdng
t from the sdes of the unt.
AWARNING:
Do not
remove the blade
unt by lftng t from
the blades.
A
WARNING: The
blade unit is very
sharp! Handle the
blade unit with ut-
most care, especially
during cleaning, in
order to avoid inju-
ries.
4. Cut the food nto small peces
and put t n the jug.
5. Close the ld by turnng t clock-
wse. Make sure that the cap/
measurng cup s nsde the ld
openng and s secured.
6. Place the jug onto the motor ho-
usng by turnng t clockwse.
A
WARNING: Make
sure that the notches
on the bottom of the
jug fit those in the
motor housing.
7. Connect the power plug to a su-
table power outlet.

12 / EN Table Blender / User Manual
3Operaton
8. The cuttng speed can be var-
ably adjusted wth the control
dal.
C
To operate the blend-
er at the low speed,
turn the control dial
to “1”. If you want to
blend with a higher
speed, turn the con-
trol dial to the speed
level “2”.
C
For short pulses of
blending with a high
speed, turn the con-
trol dial to “P”. When
you release the con-
trol dial, the blender
will stop and return
to “0” automatically.
C
If ingredients are
to be added during
the blending pro-
cess, then add them
through the opening
in the lid. To do this,
take out the cap/
measuring cup.
9. After the desred consstency of
the blended food has been reac-
hed, turn the control dal to 0 to
swtch off the blender.
A
WARNING: Never
run the blender for
longer than 1 minute,
otherwise it would
overheat. After run-
ning the appliance
for 1 minute, let it
cool down before us-
ing it again.
10.Take the jug off from the mo-
tor housng by turnng the jug
counterclockwse and open the
ld.
11. Take off the ld and pour the
mxture nto glasses or other
contaners.
C
Mix 3 units of hard
food and 2 units of
water in order to
have a smooth jug
blender experience.
(i.e: 60 gr hard food
40 ml water)

13 / EN
Table Blender / User Manual
3Operaton
12.Close the ld by turnng clock-
wse. Make sure that the cap/
measurng cup s nsde the ld
openng and s secured.
3.3 Grnder
1. Place your applance on a sold
and flat surface.
2. Put the coffee beans (max. 50 g.
to be n the grnder jug.
3. Assemble the blade unt care-
fully on the grnder jug by tur-
nng t counterclockwse.
4. Place the grnder jug onto the
motor housng.
5. Connect the power plug to a su-
table power outlet.
6. The cuttng speed can be var-
ably adjusted wth the control
dal.
C
To operate the blend-
er at the low speed,
turn the control dial
to “1”. If you want to
blend with a higher
speed, turn the con-
trol dial to the speed
level “2”.
7. After grndng, turn the control
dal to 0 to swtch off the blen-
der.
8. Set the grnder wth the openng
facng down on a level surface
and remove the blade unt by
turnng t counterclockwse.
A
WARNING: Never
run the blender for
longer than 30 sec-
onds, otherwise it
would overheat.
After running the ap-
pliance for 1 minute,
let it cool down be-
fore using it again.
3.4 Frut Flter
(TBN5400/
TBN5500)
The fruit filter is for fresh fruit
juices and cocktails. It prevents pips
and skins from your drink.
1. Ft the flter nto the mddle of
the jug.
2. Cut the frut nto small peces
and put t n the frut flter.

14 / EN Table Blender / User Manual
3Operaton
3. Close the ld of the jug by turnng
t clockwse. Make sure that the
cap/ measurng cup s nsde the
ld openng and s secured.
4. Connect the power plug to a su-
table power outlet.
– The cuttng speed can be var-
ably adjusted wth the control
dal.
5. After the desred consstency of
the blended frut has been reac-
hed, turn the control dal to 0 to
swtch off the blender.
6. Take the jug off from the motor
housng by turnng the jug coun-
terclockwse and open the ld.
7. Take off the ld and pour the
frut juce nto glasses or other
contaners.
3.5 Strrer
The stirrer can be used for blending
mixtures or frozen ingredients.
Place the stirrer into the lid hole.
Use the stirrer during the operation
by moving it anti clockwise.

15 / EN
Table Blender / User Manual
4Cleanng and care
4.1 Cleanng
1. Unplug the applance before cle-
anng.
2. Wat for the accessores used to
stop completely.
3. Remove the blade unt from the
jug after removng the jug (1)
from the applance (see. 3.2).
4. Clean the resdual food n the jug
(1) under runnng tap water.
5. After nstallng choppng acces-
sory nto the jug (1), replace the
jug on the body (4).
6. Completely fll or fll half of the
jug (3) wth warm water and
some drops of dsh-washng l-
qud and operate the applance
n hghest speed for a couple of
seconds.
7. Then remove and rnse the jug.
A
WARNING: Do not
immerse the body
(4) in water. You can
wipe it with a damp
cloth.
A
WARNING:
Chopping blade (2)
is sharp. Do not hold
the sharp edge or
immerse in water
while cleaning.
A
WARNING: Never
use petrol, solvents,
abrasive cleaners,
or metal objects and
hard brushes to clean
the appliance.

16 / EN Table Blender / User Manual
4Cleanng and care
4.2 Storage
•If you do not intend to use the
appliance for a long time, store it
carefully.
•Unplug the appliance before lift-
ing it.
•Store the appliance in a cool and
dry place.
•Keep the appliance and cable out
of the reach of children.
4.3 Handlng and
transportaton
•During handling and transporta-
tion, carry the appliance in its
original packaging. The packag-
ing of the appliance protects it
against physical damages.
•Do not place heavy loads on the
appliance or the packaging. The
appliance may be damaged.
•Dropping the appliance may ren-
der it non-operational or cause
permanent damage.

请首先阅读本手册！
亲爱的顾客，
感谢您选购 Beko 产品。我们的产品具有高品质，且采用先进的技术生产，希望您能
从中获取最大的效益。因此，使用本产品前，请仔细阅读完整的用户手册和附带的其
它文件，并妥善保管，以备日后使用。如果将本产品转让他人，请一并移交用户手
册。请遵循用户手册中包含的所有警告和信息。
符号含义
在本手册的不同章节使用了下列符号：
C
有关使用的重要信息和有用的提示。
A警告：
有关生命和财产安全之危险
情况的警告。
适合接触食物。
本设备、电源线或电源插头不得浸泡
在水或任何其它液体中。
触电防护等级。
本产品由高度环保的现代化工厂制造。
其不含 PCB。
本设备符合 WEEE 规定。
中国制造

18 / ZH 搅拌机 / 手冊
1 重要的安全和环境说明
本节包含的安全须知有助于避免发生人身伤害或财产
损失之风险。
若未遵循这些说明将导致保修条款失效。
1.1 一般安全
•本设备符合国际安全标准。
•本装置拟供家庭和类似环境使用，例如：
– 商场、办公室和其他工作环境的员工厨房区域；
– 农场；
– 酒店、汽车旅馆和其他居住型环境中的顾客；
– 住宿和早餐型环境。
•本用具可由身体、感官或智力能力受限或不具备知
识和经验的人使用，只需要他们的监护人或本人了
解有关产品安全使用和潜在危险的说明。
•儿童不得摆弄本装置。
•儿童不得实施清洁和工作。
•儿童不得使用本装置。
•如果电源线、刀片或装置本身损坏，请停止使用。
并与授权服务部门联系。

19 / ZH
搅拌机 / 手冊
1 重要的安全和环境说明
•离开本装置、安装/拆卸附件或清洁前，请拔下电源
插头。
•只能使用原装零件或制造商建议的零件。
•请勿试图拆解本装置。
•请勿在高温表面上方或附近操作或放置本装置的任
何部分。
•本装置不得用于高温食物。
•确保电源符合设备铭牌上提供的信息。
•本装置不得使用加长电源线。
•请勿使用湿手接触本装置的插头。
•拔下插头时，请勿拉拔电源线。
•清洁、拆解，更换附件前，应拔下插头，并等待其
完全停止工作。
•清空容器时，清洁和裸手抓握斩拌刀期间，若使用
不当，可能导致严重受伤。尝试使用塑料部分抓握
斩拌刀。
•使用本装置时，切勿接触刀片。可能因使用不当导
致受伤。
•清洁后，晾干本装置和所有零件，而后连接主电源
和连接零件。

20 / ZH 搅拌机 / 手冊
1 重要的安全和环境说明
•本设备、电源线或电源插头不得浸泡在水或任何其
它液体中。
•如果保留包装材料，应置于儿童不可及之处。
•本装置和电源线应置于儿童不可及之处。
1.2 符合 WEEE 指令和废旧产品处置
本产品不含环境和城市部签发的“废旧电器电子设备监管规定”
中指定的有害和禁用材料。符合报废的电子电气设备（WEEE）
处置规定。本装置采用可以重复使用和适合回收的优质零件和材
料制成。因此，在本装置使用寿命结束时，请勿作为日常生活垃
圾进行处置。而应将本产品送至电器和电子设备回收点进行处
置。有关这些回收点的信息，请咨询当地的政府部门。通过回收用过的产
品，有助于保护环境和自然资源。
1.3 包装信息
产品包装采用符合国家法律的可回收材料制成。请勿将包装材
料与生活垃圾或其它垃圾一起处置。应将包装材料运送至当地
机构指定的包装材料回收点。
1.4 节能措施
按照用户手册中的说明，将固体食物放入本装置前，请切割为小块。遵循
手册中的其他说明和指定的时间。如果制作的食物适合，可以选择低速水
平。使用后，关闭开关，并拔下插头。