Belden Hirschmann MACH4002 Series User manual

Installation MACH4002
Release 16 03/2021
Technical support
https://hirschmann-support.belden.com
User Manual
Installation
Modular Industrial Ethernet Backbone Switch
MACH4002 family
P
1LS DA 2345678
M4-8TP-RJ45 LS DA LS DA LS DA LS DA LS DA LS DA LS DA
R
1LS DA 2345678
LS DA LS DA LS DA LS DA LS DA LS DA LS DA
P
1
LS/DA
2345678
147
258
36
M4-FAST 8SFP
P
12345678
147
258
36
P P1P2P3P4
RM RL1 RL2 FAN RUN
L/D FDX 1000 AN TP/FO
RING
PORT STBY LED
TEST 21
12
34
LED
MEDIA SLOTS
M4-AIR
SLOT.PORT
USBV.24
5.1 5.2 5.3 6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
6.10
6.11
6.12
6.13
6.14
6.15
6.16
SELECT
LED
MACH 4002 48+4G
FAULT
RL2
LS/DA 6.1 6.16 LS/DA
RL1
LS/DA
M4-FAST 8TP-RJ45-PoE
M4-FAST 8SFP
P
1LS DA 2345678
M4-8TP-RJ45 LS DA LS DA LS DA LS DA LS DA LS DA LS DA
R
1LS DA 2345678
LS DA LS DA LS DA LS DA LS DA LS DA LS DA
P
1
LS/DA
2345678
147
258
36
M4-FAST 8SFP
P
12345678
147
258
36
P P1P2P3P4
RM RL1 RL2 FAN RUN
L/D FDX 1000 AN TP/FO
RING
PORT STBY LED TEST 21
12
34
LED
MEDIA SLOTS
M4-AIR
SLOT.PORT
USBV.24
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
6.10
6.11
6.12
6.13
6.14
6.15
6.16
SELECT
LED
MACH 4002 48+4G
FAULT
RL2
LS/DA 6.1 6.16 LS/DA
RL1
LS/DA
M4-FAST 8TP-RJ45-PoE
M4-FAST 8SFP
MACH4002-48G
6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8
P
1LS DA 2345678
M4-8TP-RJ45 LS DA LS DA LS DA LS DA LS DA LS DA LS DA
R
1LS DA 2345678
LS DA LS DA LS DA LS DA LS DA LS DA LS DA
P
1
LS/DA
2345678
147
258
36
M4-FAST 8SFP
P
12345678
147
258
36
P P1P2P3P4
RM RL1 RL2 FAN RUN
L/D FDX 1000 AN TP/FO
RING
PORT STBY LED
TEST 21
12
34
LED
MEDIA SLOTS
M4-AIR
SLOT.PORT
USBV.24
5.1 5.2 5.3 6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
SELECT
LED
MACH 4002 48+4G
FAULT
RL2
LS/DA 6.1
RL1
LS/DA
M4-FAST 8TP-RJ45-PoE
M4-FAST 8SFP
MACH4002-24G+3X
P
1LS DA 2345678
M4-8TP-RJ45 LS DA LS DA LS DA LS DA LS DA LS DA LS DA
R
1LS DA 2345678
LS DA LS DA LS DA LS DA LS DA LS DA LS DA
P
1
LS/DA
2345678
147
258
36
M4-FAST 8SFP
P
12345678
147
258
36
PP1P2P3P4
RM RL1 RL2 FAN RUN
L/D FDX 1000 AN TP/FO
RING
PORT STBY LED
TEST 21
12
34
LED
MEDIA SLOTS
M4-AIR
SLOT.PORT
USBV.2 4
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
SELECT
LED
MACH 4002 48+4G
FAULT
RL2
LS/DA 6.1
RL1
LS/DA
M4-FAST 8TP-RJ45-PoE
M4-FAST 8SFP
MACH4002-24G
6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8
MACH4002-48G+3X

24.03.2021 Installation MACH4002
Release 16 03/2021
The naming of copyrighted trademarks in this manual, even when not specially indicated, should
not be taken to mean that these names may be considered as free in the sense of the trademark
and tradename protection law and hence that they may be freely used by anyone.
© 2021 Hirschmann Automation and Control GmbH
Manuals and software are protected by copyright. All rights reserved. The copying, reproduction,
translation, conversion into any electronic medium or machine scannable form is not permitted,
either in whole or in part. An exception is the preparation of a backup copy of the software for
your own use.
The performance features described here are binding only if they have been expressly agreed
when the contract was made. This document was produced by Hirschmann Automation and
Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right
to change the contents of this document without prior notice. Hirschmann can give no guarantee
in respect of the correctness or accuracy of the information in this document.
Hirschmann can accept no responsibility for damages, resulting from the use of the network
components or the associated operating software. In addition, we refer to the conditions of use
specified in the license contract.
You can get the latest version of this manual on the Internet at the Hirschmann product site
(www.hirschmann.com).
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany

Installation MACH4002
Release 16 03/2021 3
Contents
Important Information 6
Safety instructions 7
About this manual 13
Key 14
1 Description 15
1.1 General device description 15
1.2 MACH4002 Basic Device 16
1.3 Supply voltage 20
1.3.1 Power supply connections on the rear side of the
device 21
1.3.2 M4-POWER power unit chassis 21
1.4 Fan 23
1.4.1 M4-AIR plug-in fan 23
1.4.2 Monitoring temperature and fan 24
1.5 Integrated basic board 25
1.5.1 Left area of basic board 26
1.5.2 Right area of basic board 27
1.6 Signal contact 28
1.7 Media modules 28
1.7.1 M4-8TP-RJ45 29
1.7.2 M4-FAST 8-SFP 29
1.7.3 M4-GIGA 8-SFP 29
1.8 SFP/XFP transceiver 30
1.9 Ethernet ports 31
1.9.1 10/100/1000 Mbit/s twisted pair port 31
1.9.2 100 Mbit/s F/O port 31
1.9.3 1000 Mbit/s F/O port 32
1.9.4 10-Gbit/s F/O port 32
1.9.5 Combo ports 32
1.10 Display elements 33
1.10.1 Device state 33

4Installation MACH4002
Release 16 03/2021
1.10.2 Port status display 35
1.10.3 ACA Auto Configuration Adapter 36
2 Installation 39
2.1 Checking the package contents 39
2.2 Installing the device and grounding 39
2.2.1 Selecting the assembly location 39
2.2.2 Mounting on a flat surface 40
2.2.3 Mounting in a switch cabinet 40
2.2.4 Grounding the device 42
2.3 Mounting the power supply unit on the back of the
MACH4002 device 42
2.4 Mounting the power unit chassis, connecting with the
MACH4002 device 43
2.5 Installing the M4-AIR... plug-in fan unit 44
2.6 Installing the plug-in power units in the M4-POWER power
unit chassis 45
2.7 Installing media modules 45
2.8 Installing an SFP transceiver (optional) 47
2.9 Connecting the supply voltage 47
2.10 Wiring and installing the signal contact 49
2.11 Connecting data cables 50
3 Making basic settings 51
4 Maintenance and service 52
5 Deinstallation 53
5.1 Removing a media module 53
5.2 Removing an SFP transceiver (optional) 54
5.3 Deinstalling the M4-AIR... plug-in fan unit 54
6 Technical data 55
6.1 General technical data 55
6.2 Dimension drawings 56
6.3 Interfaces 57

Installation MACH4002
Release 16 03/2021 5
6.4 EMC and immunity 57
6.5 Network range 58
6.5.1 10/100/1000 Mbit/s twisted pair port 58
6.5.2 Fast Ethernet SFP transceiver 58
6.5.3 Bidirectional Fast Ethernet SFP transceiver 59
6.5.4 Gigabit Ethernet SFP transceiver 60
6.5.5 Bidirectional Gigabit Ethernet SFP transceiver 61
6.6 Power consumption/power output 63
6.7 Scope of delivery 64
6.7.1 MACH4002-... 64
6.7.2 M4-POWER 64
6.7.3 M4-S-... 64
6.7.4 M4-P-... 64
6.8 Order numbers/product description 65
6.9 Accessories 66
6.10 Underlying technical standards 69
A Further support 70

6Installation MACH4002
Release 16 03/2021
Important Information
Notice: Read these instructions carefully, and look at the equipment to
become familiar with the device before trying to install, operate, or maintain
it. The following special messages may appear throughout this
documentation or on the equipment. The message warns of potential
hazards or calls attention to information that clarifies or simplifies a
procedure.
Symbol explanation
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
The addition of this symbol to a “Danger” or “Warning” safety
label indicates that an electrical hazard exists, which will result
in personal injury if the instructions are not followed.
This symbol points out the dangers posed by hot device
surfaces. In connection with safety notes, the disregard of these
instructions will result in injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided,
can result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided,
can result in minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physical injury.

Installation MACH4002
Release 16 03/2021 7
Safety instructions
General safety instructions
You operate this device with electricity. Improper usage of the device
entails the risk of physical injury or significant property damage. The
proper and safe operation of this device depends on proper handling
during transportation, proper storage and installation, and careful
operation and maintenance procedures.
Before connecting any cable, read this document, and the safety
instructions and warnings.
Operate the device with undamaged components exclusively.
The device is free of any service components. In case of a damaged
or malfunctioning device, turn off the supply voltage and return the
device to Hirschmann for inspection.
Qualification requirements for personnel
Only allow qualified personnel to work on the device.
Qualified personnel have the following characteristics:
Qualified personnel are properly trained. Training as well as practical
knowledge and experience make up their qualifications. This is the
prerequisite for grounding and labeling circuits, devices, and systems
in accordance with current standards in safety technology.
Qualified personnel are aware of the dangers that exist in their work.
Qualified personnel are familiar with appropriate measures against
these hazards in order to reduce the risk for themselves and others.
Qualified personnel receive training on a regular basis.
Certified usage
Use the device solely for the application cases described in the
Hirschmann product information, including this manual.
Operate the device solely according to the technical specifications.
National and international safety regulations
Verify that the electrical installation meets local or nationally applicable
safety regulations.
Supply voltage
Every time you connect the electrical conductors, make sure that the
following requirements are met:
Devices with DC power supply are designed for the operation with
Safety Extra Low Voltage. On the DC supply voltage connections,
exclusively connect PELV or SELV circuits according to IEC 60950-1
or ES1 circuits according to IEC/EN 62368-1.
The supply voltage complies with the description on the type plate of
your device.

8Installation MACH4002
Release 16 03/2021
The complete defective plug-in power supply unit must be changed.
For safety reasons, the fuse installed in the plug-in power supply units
may not be changed.
Only switch on the device when the housing is closed. Close all empty
slots with a covering panel.
Screw the power supply units to the housing before connecting the
input voltage.
If you are using the M4-POWER power unit chassis: Check the
configuration of the connection plugs and the power supply cable to
the switch chassis before you connect an external voltage to the M4-
POWER inputs.
Only use connection cables that are permitted for a temperature range
from 0 °C ... +60 °C (+32 °F ... +140 °F).
Only use copper wire/conductors of class 1, +75 °C (+167 °F).
Only use the M4-POWER CABLE for the redundant power supply.
Only use the M4-POWER power supply unit for the redundant power
supply. Do not connect any other external voltage source.
Use undamaged parts.
Safe grounding
Make sure you ground the devices assembled in the switch cabinet
safely. In particular, check the supply voltage connections if they are not
connected directly to the supply cable (e.g. when using power strips).
Signal contacts (“FAULT”)
Exclusively connect SELV circuits with voltage restrictions according to
IEC 60950-1 or ES1 circuits according to IEC/EN 62368-1 to the signal
contacts.
Shielded ground
The shielded ground wire of the twisted pairs cables is connected to the
front panel as a conductor.
Beware of possible short circuits when connecting a cable section with
conductive shield braiding.
ESD Guidelines
Media modules are equipped with electrostatically sensitive components.
These can be destroyed by the effect of an electric field or by charge
equalization when touching the printed circuit board or the contacts, or
their lifetime can be affected. Media modules are therefore delivered
packed in a conductive ESD protection bag. The packaging is reusable.
Make sure you adhere to the following protection measures for
electrostatically endangered assemblies:
Create electrical equipotential bonding between yourself and your
environment, e.g. using a wristband, which you clamp to the basic
device (knurled screw of an interface card). When the power supply

Installation MACH4002
Release 16 03/2021 9
cable is connected, the basic device is grounded via the power supply
connection.
Only now do you take the card out of the conductive bag.
Outside the basic device, only store the cards in a conductive ESD
protective bag.
ESD protective field equipment is available for the safe handling of
electrostatically endangered assemblies.
Further information about electrostatic sensitive modules can be found in
DIN EN 61340-5-1 (2007-08) and DIN EN 61340-5-2 (2007-08).
Device casing
Only technicians authorized by the manufacturer are permitted to open
the casing.
The device is grounded via the voltage supply socket.
Reduced air flow: Install the device in the switch cabinet in such a way
that ensures sufficient air flow for operating the device safely.
Keep the ventilation slits free to ensure good air circulation.
Make sure there is at least 3.94 in (10 cm) of space in front of the
ventilation slits of the casing.
Never operate the device without a plug-in fan.
See “Fan” on page 23.
Never insert pointed objects (narrow screwdrivers, wires, etc.) into the
device or into the connection terminals for electric conductors. Do not
touch the connection terminals.
Seal all unused slots with cover panels.
Modules, fans and power supply units of a switched-on device may
only be installed or removed by an electrician.
Fans are subject to natural wear. If one or more fans in the plug-in fan
fail, function and lifetime of a device can be negatively affected or the
device may fail completely. Use the monitoring functions of the device
for fans and temperature.
Depending on your installation conditions, it may be possible to
continue operating your device after one fan has failed. Observe the
temperature display of your device.
– In the Command Line Interface with the command: show
temperature.
– In the Graphical User Interface, in the dialog Basic settings:
System, Temperature
The displayed temperature must not exceed the maximum value of
+80 °C (+176 °F).
The basic board must not be removed.
Removing the basic board invalidates the guarantee.
The chassis should be installed in the horizontal position.
After the device is switched off, the fan blades continue rotating for a
number of seconds. Do not reach into a rotating fan!

10 Installation MACH4002
Release 16 03/2021
The internal workings of the basic device are not for users! Do not
reach inside a switched-on device because of the danger caused by
high energy densities.
When fully equipped with media modules, the device weighs up to
10 kg. Please comply with the legally stipulated maximum weight
when dealing with heavy objects.
If you are operating the device in a 19" switch cabinet: install sliding/
mounting rails for supporting the weight of the device.
See “Mounting in a switch cabinet” on page 40.
Installation site requirements
Operate the device at the specified ambient temperature (temperature of
the ambient air at a distance of 2 in (5 cm) from the device) and at the
specified relative humidity exclusively.
When you are selecting the installation location, make sure you
observe the climatic threshold values specified in the technical data.
Use the device in an environment with a maximum pollution degree
that complies with the specifications in the technical data.
Increased ambient temperature: When you are operating the device in
a closed switch cabinet or together with other devices in a switch
cabinet, the ambient temperature in the switch cabinet can be higher
than the ambient temperature in the room. Only install the device in an
ambient temperature in line with the maximum ambient temperature
specified by the manufacturer: tmax.
Mechanical stress: Install the device in a switch cabinet in such a way
that rules out hazardous conditions due to severe mechanical stress.
Strain relief
Note: If the strain relief is insufficient, there is a risk of torsion, contact
problems and creeping interruptions.
Relieve the connection points of cables and lines from mechanical
stress.
Design strain relieves in such a way that they prevent any mechanical
damage to cables, wires or conductors caused by external influences
or their own weight.
To prevent damage to device connections, connectors and cables,
follow the instructions for proper installation in accordance with DIN
VDE 0100-520:2013-06, sections 522.6, 522.7 and 522.13.

Installation MACH4002
Release 16 03/2021 11
CE marking
The devices comply with the regulations contained in the following
European directives:
2011/65/EU and 2015/863/EU (RoHS)
Directive of the European Parliament and of the Council on the restriction
of the use of certain hazardous substances in electrical and electronic
equipment.
2014/35/EU
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the making
available on the market of electrical equipment designed for use within
certain voltage limits.
2014/30/EU (EMC)
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to
electromagnetic compatibility.
In accordance with the above-named EU directive(s), the EU conformity
declaration will be at the disposal of the relevant authorities at the
following address:
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
You find the EU conformity declaration as PDF file for downloading on the
Internet at: https://www.doc.hirschmann.com/certificates.html
The product can be used in the industrial sector.
Interference immunity: EN 61000-6-2
Emitted interference: EN 55032
Safety: EN 62368-1
You find more information on technical standards here:
“Underlying technical standards” on page 69
Warning! This is a class A device. This device can cause interference in
living areas, and in this case the operator may be required to take
appropriate measures.
Note: The assembly guidelines provided in these instructions must be
strictly adhered to in order to observe the EMC threshold values.

12 Installation MACH4002
Release 16 03/2021
LED or laser components
LED or LASER components according to IEC 60825-1 (2014):
CLASS 1 LASER PRODUCT
CLASS 1 LED PRODUCT
FCC note
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
MACH4002
U.S. Contact Information
Belden – St. Louis
1 N. Brentwood Blvd. 15th Floor
St. Louis, Missouri 63105, United States
Phone: [phone]
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Recycling note
After usage, this device must be disposed of properly as electronic waste,
in accordance with the current disposal regulations of your county, state,
and country.

Installation MACH4002
Release 16 03/2021 13
About this manual
The “Installation” user manual contains a device description, safety
instructions, a description of the display, and the other information that you
need to install the device.
The following manuals are available as PDF files for download on the Internet
at https://www.doc.hirschmann.com/ :
User Manual Installation
User Manual Basic Configuration
User Manual Redundancy Configuration
Reference Manual Graphical User Interface
Reference Manual Command Line Interface
The Network Management Software Industrial HiVision provides you with
options for smooth configuration and monitoring. You find further information
on the Hirschmann product pages on the internet: www.hirschmann.com/de/
Hirschmann/Industrial_Ethernet/Netzmanagement/index.phtml
With the Industrial HiVision Network Management software, you increase
your network security in industrial application areas:
Ethernet Early Warning System
Easy monitoring of industrial networks
Fast display
Interface with diagnostic and configuration programs
Low deployment cost

14 Installation MACH4002
Release 16 03/2021
Key
The symbols used in this manual have the following meanings:
Listing
Work step
Subheading

Installation MACH4002
Release 16 03/2021 15
1 Description
1.1 General device description
The modular, industry-compatible MACH4002 Gigabit Ethernet system is
used as an industrial backbone system, and also in applications with high
data volumes, such as Voice/Video over IP.
The MACH4002 is a modular, industry-compatible Gigabit Ethernet system
in a 19" chassis that is also suitable for use as an industrial backbone system.
The MACH4002 devices are designed for the special requirements of
industrial automation. They meet the relevant technical standards, provide
very high operational reliability, even under extreme conditions, and also
long-term reliability and flexibility. The power is supplied by an AC or DC
power unit at the back of the device, or it is supplied redundantly via a power
unit chassis with up to three hot-swappable plug-in power units. The switches
and the power unit chassis are suitable for mounting in the 19" rack.
The device allows you to set up switched Industrial Ethernet networks
according to standard IEEE 802.3.
The HIPER-Ring redundancy concept enables you to quickly carry out a
reconfiguration, and also a simple configuration with only one additional
connection.
The diagnosis LEDs for displaying the operating parameters provide a quick
overview.
There are convenient options for managing the device. Manage your devices
via:
Web browser
SSH
Telnet
HiDiscovery (software for putting the device into operation)
Network management software (for example Industrial HiVision)
V.24 interface (locally on the device)
The device provides you with a large range of functions, which the manuals
for the operating software inform you about. You can download these
manuals as PDF files from the Internet on the Hirschmann product pages
(http://www.doc.hirschmann.com).

16 Installation MACH4002
Release 16 03/2021
1.2 MACH4002 Basic Device
Depending on the MACH4002 device variant, the device provides you with
the following ports and slots for equipping it with media modules:
1 Media module 3 (plug-in unit)
2 Media module 1 (plug-in unit)
3 Media module 4 (plug-in unit)
4 Media module 2 (plug-in unit)
5 USB interface
6 V.24 interface for external management
7 Basic board (integrated)
16 × Twisted Pair port (Port 6.1 ... 6.16)
8 2 × switchable signal contact
9 Basic board (integrated)
4 × Combo port 5.1 ... 5.4
10 LED display elements
11 SELECT button
12 Label for the LED display elements
13 Plug-in fan
Rear side of the device:
Power supply unit
External connection to M4-POWER
Table 1: Structure of the basic device (Example: MACH4002-48G)
1 Basic board (integrated), Port 6.1 ... 6.8, SFP 100/1000 Mbit/s (alternative to the RJ45
Ports 6.1 ... 6.8)
Table 2: Ports and Media module slots on the MACH4002-24G
P
1LS DA 2345678
M4-8TP-RJ45 LS DA LS DA LS DA LS DA LS DA LS DA LS DA
R
1LS DA 2345678
LS DA LS DA LS DA LS DA LS DA LS DA LS DA
P
1
LS/DA
2345678
147
258
36
M4-FAST 8SFP
P
12345678
147
258
36
PP1P2P3P4
RM RL1 RL2 FAN RUN
L/D FDX 1000 AN TP/FO
RING
PORT STBY LED TEST 21
12
34
LED
MEDIA SLOTS
M4-AIR
SLOT.PORT
USBV.24
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
6.10
6.11
6.12
6.13
6.14
6.15
6.16
SELECT
LED
MACH 4002 48+4G
FAULT
RL2
LS/DA 6.1 6.16 LS/DA
RL1
LS/DA
M4-FAST 8TP-RJ45-PoE
M4-FAST 8SFP
6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8
1 2 3 4
13 12 11
10 9 8 7 6 5
P
1LS DA 2345678
M4-8TP-RJ45 LS DA LS DA LS DA LS DA LS DA LS DA LS DA
R
1LS DA 2345678
LS DA LS DA LS DA LS DA LS DA LS DA LS DA
P
1
LS/DA
2345678
147
258
36
M4-FAST 8SFP
P
12345678
147
258
36
PP1P2P3P4
RM RL1 RL2 FAN RUN
L/D FDX 1000 AN TP/FO
RING
PORT STBY LED TEST 21
12
34
LED
MEDIA SLOTS
M4-AIR
SLOT.POR T
USBV.2 4
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
SELECT
LED
MACH 4002 48+4G
FAULT
RL2
LS/DA 6.1
RL1
LS/DA
M4-FAST 8TP-RJ45-PoE
M4-FAST 8SFP
6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8
3
4
2
1

Installation MACH4002
Release 16 03/2021 17
2 Media module 1 (plug-in unit), Port 1.1 ... 1.8, 10/100/1000 Mbit/s
3 Media module 2 (plug-in unit), Port 2.1 ... 2.8, 10/100/1000 Mbit/s
4 Basic board (integrated), Port 6.1 ... 6.8, RJ45 10/100/1000 Mbit/s
1 Basic board (integrated), Port 5.1 ... 5.3, XFP 10 Gbit/s
2 Media module 1 (plug-in unit), Port 1.1 ... 1.8, 10/100/1000 Mbit/s
3 Media module 2 (plug-in unit), Port 2.1 ... 2.8, 10/100/1000 Mbit/s
4 Basic board (integrated), Port 6.1 ... 6.8, RJ45 10/100/1000 Mbit/s
Table 3: Ports and Media module slots on the MACH4002-24G+3X
1 Basic board (integrated), Port 6.1 ... 6.8, SFP 100/1000 Mbit/s (alternative to the RJ45
Ports 6.1 ... 6.8)
2 Media module 1 (plug-in unit), Port 1.1 ... 1.8, 10/100/1000 Mbit/s
3 Media module 3 (plug-in unit), Port 3.1 ... 3.8, 10/100/1000 Mbit/s
4 Media module 4 (plug-in unit), Port 4.1 ... 4.8, 10/100/1000 Mbit/s
5 Media module 2 (plug-in unit), Port 2.1 ... 2.8, 10/100/1000 Mbit/s
6 Basic board (integrated), Port 6.1 ... 6.16, RJ45 10/100/1000 Mbit/s
Table 4: Ports and Media module slots on the MACH4002-48G
1 Basic board (integrated), Port 5.1 ... 5.3, XFP 10 Gbit/s
2 Media module 1 (plug-in unit), Port 1.1 ... 1.8, 10/100/1000 Mbit/s
3 Media module 3 (plug-in unit), Port 3.1 ... 3.8, 10/100/1000 Mbit/s
4 Media module 4 (plug-in unit), Port 4.1 ... 4.8, 10/100/1000 Mbit/s
5 Media module 2 (plug-in unit), Port 2.1 ... 2.8, 10/100/1000 Mbit/s
6 Basic board (integrated), Port 6.1 ... 6.16, RJ45 10/100/1000 Mbit/s
Table 5: Ports and Media module slots on the MACH4002-48G+3X
Table 2: Ports and Media module slots on the MACH4002-24G
P
1LS DA 2345678
M4-8TP-RJ45 LS DA LS DA LS DA LS DA LS DA LS DA LS DA
R
1LS DA 2345678
LS DA LS DA LS DA LS DA LS DA LS DA LS DA
P
1
LS/DA
2345678
147
258
36
M4-FAST 8SFP
P
12345678
147
258
36
P P1P2P3P4
RM RL1 RL2 FAN RUN
L/D FDX 1000 AN TP/FO
RING
PORT STBY LED TEST 21
12
34
LED
MEDIA SLOTS
M4-AIR
SLOT.POR T
USBV.2 4
5.1 5.2 5.3 6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
SELECT
LED
MACH 4002 48+4G
FAULT
RL2
LS/DA 6.1
RL1
LS/DA
M4-FAST 8TP-RJ45-PoE
M4-FAST 8SFP
3
4
2
1
P
1LS DA 2345678
M4-8TP-RJ45 LS DA LS DA LS DA LS DA LS DA LS DA LS DA
R
1LS DA 2345678
LS DA LS DA LS DA LS DA LS DA LS DA LS DA
P
1
LS/DA
2345678
147
258
36
M4-FAST 8SFP
P
12345678
147
258
36
P P1P2P3P4
RM RL1 RL2 FAN RUN
L/D FDX 1000 AN TP/FO
RING
PORT STBY LED TEST 21
12
34
LED
MEDIA SLOTS
M4-AIR
SLOT.POR T
USBV.2 4
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
6.10
6.11
6.12
6.13
6.14
6.15
6.16
SELECT
LED
MACH 4002 48+4G
FAULT
RL2
LS/DA 6.1 6.16 LS/DA
RL1
LS/DA
M4-FAST 8TP-RJ45-PoE
M4-FAST 8SFP
6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8
4
5
6
3
2
1
P
1LS DA 2345678
M4-8TP-RJ45 LS DA LS DA LS DA LS DA LS DA LS DA LS DA
R
1LS DA 2345678
LS DA LS DA LS DA LS DA LS DA LS DA LS DA
P
1
LS/DA
2345678
147
258
36
M4-FAST 8SFP
P
12345678
147
258
36
P P1P2P3P4
RM RL1 RL2 FAN RUN
L/D FDX 1000 AN TP/FO
RING
PORT STBY LED TEST 21
12
34
LED
MEDIA SLOTS
M4-AIR
SLOT.POR T
USBV.2 4
5.1 5.2 5.3 6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
6.10
6.11
6.12
6.13
6.14
6.15
6.16
SELECT
LED
MACH 4002 48+4G
FAULT
RL2
LS/DA 6.1 6.16 LS/DA
RL1
LS/DA
M4-FAST 8TP-RJ45-PoE
M4-FAST 8SFP 4
5
6
3
2
1

18 Installation MACH4002
Release
16
03/2021
The devices comply with the specifications of the standards:
ISO/IEC 8802-3u 100BASE-TX/-1000BASE-TX
ISO/IEC 8802-3 100BASE-FX
ISO/IEC 8802-3 1000BASE-SX/LX
ISO/IEC 8802-3 10GBASE-SR/LR
The MACH4002 basic devices are 2 height modules high (approx. 88 mm) and, depending on the device variant and the
connected media, they provide you with
up to 48 Fast Ethernet ports
up to 48 Gigabit Ethernet ports
up to three 10 Gigabit Ethernet ports
See “Ethernet ports” on page 31.
You can order the basic devices with different ranges of functions (see on page 65 “Order numbers/product description”).
The software supplied defines the range of functions:
Software Layer 2 Professional (L2P)
Software Layer 3 Enhanced (L3E), static routing
Software Layer 3 Professional (L3P), Multicast routing
Basic device Maximum number of ports on the device, in brackets number of installed ports on the basic
board
Maximum number of media
modules
TP ports, 10/100 Mbit/s TP ports, 10/100/
1000 Mbit/s
TP/SFP Combo ports,
10/100/1000 Mbit/s
XFP slots, 10 Gbit/s 10/100 Mbit/s 10/100/1000 Mbit/s
4002-24G - (-) 16 (-) 8 (8a)
a. SFP 100/1000 Mbit/s
- (-) - 2
4002-48G - (-) 48 (8) 8 (8c) - (-) - 4
4002-24G+3X - (-) 24 (8) - (-) 3 (3) - 2
4002-48G+3X - (-) 48 (16) - (-) 3 (3) - 4
Table 6: Maximum number of ports and media modules

Installation MACH4002
Release 16 03/2021 19
Depending on the device variant, a basic device has 2 or 4 slots for media
modules (media modules 1 ... 2 or 1 ... 4) that are hot-swappable and
provide 8 Fast Ethernet/Gigabit Ethernet ports each. The media modules
differ with regard to the number of interfaces and the media type for
connecting segments.
The integrated basic board is located below the media modules.
The basic board has the following connections:
MACH4002-24G: 8 × Gigabit Ethernet ports (SFP-Schächte für
100BASE-FX, 1000BASE-SX/LX, Media module 6, alternative to the
RJ45 ports 6.1 ... 6.8) and 8 × Gigabit Ethernet RJ45 ports (10/100/
1000BASE-TX, Media module 6).
MACH4002-48G: 8 × Gigabit Ethernet ports (SFP-Schächte für
100BASE-FX, 1000BASE-SX/LX, Media module 6, alternative to the
RJ45 ports 6.1 ... 6.8) and 16 × Gigabit Ethernet RJ45 ports (10/100/
1000BASE-TX, Media module 6).
MACH4002-24G+3XP: 3 × 10 Gigabit Ethernet ports (XFP slots for
10GBASE-SR/LR, Media module 5) and 8 × Gigabit Ethernet RJ45 ports
(10/100/1000BASE-TX, Media module 6).
MACH4002-24G+3XP: 3 × 10 Gigabit Ethernet ports (XFP slots for
10GBASE-SR/LR, Media module 5) and 16 × Gigabit Ethernet RJ45
ports (10/100/1000BASE-TX, Media module 6).
Along with the 10-Gigabit (if present), Gigabit and Fast Ethernet ports, the
front of the basic board also has the following connections:
A USB socket for connecting an AutoConfiguration Adapter ACA22.
A V.24 socket for the network management connection.
2 signal contacts that are integrated on one socket together.
The LED display block on the left side of the basic board informs you about
the status of the device. You use the SELECT button to define the meaning
of the LED displays.
At the front left of the basic chassis of the MACH4002, there is a replaceable
plug-in fan.
On the back of the device there is a slot for a power supply unit:
AC plug-in power unit 300 W
The back of the device also has 2 external inputs (voltage input number 3
and 4) for the redundant voltage supply via the M4-POWER power supply
unit basic device.
The M4-POWER power unit basic device enables a redundant power supply.
Power supply cable(s) between M4-POWER and MACH4002 can be
connected at the back of the MACH4002 device. The M4-POWER power
supply basic device provides you with 3 slots for plug-in power units:
AC plug-in power unit 300 W

20 Installation MACH4002
Release 16 03/2021
1.3 Supply voltage
On the back of the device there is a slot for a power supply unit (AC or DC)
and 2 inputs for the redundant power supply via the M4-POWER power
supply unit basic device. Both inputs are uncoupled.
Figure 1: Back side of the MACH4002 basic device
1 - M4-POWER connection (voltage input P3-1/P3-2, external)
2 - M4-POWER connection (voltage input P4-1/P4-2, external)
3 - Slot for slide-in power supply unit
(voltage input P1 and, if required, P2)
With redundant supply, the power supply unit with the higher output voltage
supplies the device on its own. The supply voltage is electrically isolated from
the housing.
With non-redundant supply of the mains voltage, the device reports a power
failure. You can avoid this message by changing the configuration in the
management, or, with power supply units of the same type, by feeding the
supply voltage in through both inputs.
123