Belkin F1D201 User manual

Package Contents
Introduction 1
Introduction
This booklet will guide you through the basic steps needed to install the
2-Port Reverse KVM Switch.
2-Port Reverse
KVM Switch
Quick Installation
Guide

Specifications 2
Specifications
Part No. F1D201
Material Plastic enclosure
Net Weight 30.6 lbs. (13.9kg.)
Unit Dimensions 2.95 (W) x 2.76 (D) x 1.23 (H) in.
(75 x 70 x 31.3mm)
Max. Video Resolution 1600x1200
Keyboard Connection PS/2
Mouse Connection PS/2
Monitor Connection HDDB15 (VGA)
Warranty 2 years

Installation 3
Installation
Step 1 Power off your computer.
Step 2 Using the included KVM cable, connect the male VGA end to the VGA port on
your computer.
Step 3 Connect the PS/2 ends of the included KVM cable to the keyboard and mouse
ports, paying particular attention to which cable connects to which port. They
are not interchangeable.
Step 4 Connect your monitors to the back of the Reverse KVM Switch.

Installation 4
Step 5 Connect your keyboards and mice to the console ports to the back of the
Reverse KVM Switch.
Step 6 Turn on the connected monitors.
Step 7 Turn on the connected computer. The display LED will turn on User 1 or User 2,
depending on the last lighted position of the LEDs.
You are now ready to use your 2-Port Reverse KVM Switch.

Using your 2-Port Reverse KVM Switch 5
Using your 2-Port
Reverse KVM Switch
Switch Between Two Users
Press “Ctrl” twice (within three seconds) to switch between users.
Switch the Beeping Sound ON/OFF
Press the right “Shift” twice (within three seconds) to switch the beeping sound ON
or OFF.
Hot-Key Setting Mode
1To enter the hot-key setting mode, press “Scroll-Lock” twice (within three seconds).
2The LED lights under “Num Lock”, “Caps Lock”, and “Scroll Lock” at the top right
corner of the keyboard will be used as an indicator for the time-out setting.

Hot-Key Setting Mode 6
4Single Screen Display:
To turn on or off the display on the other console, press “L” while in the hot-key
setting mode.
5Release control to the other user:
While in the hot-key mode, press “SPACE” to give the usage to the other user.
6Exit the hot-key setting mode:
Press “ESC” to exit the hot-key setting mode.
Time-Out Period NUM LOCK CAPS LOCK SCROLL LOCK
30 sec. OFF OFF ON
1 min. ON OFF OFF
3 min. ON OFF ON
5 min. OFF ON OFF
10 min. OFF ON ON
20 min. ON ON OFF
3Adjusting time-out setting:
a. Under the hot-key settings, press “-” to decrease the time-out period.
b. Under the hot-key settings, press “+” to increase the time-out period.
c. Time-out setting table.

Belkin Tech Support
US: 800-223-5546, ext. 2263
310-898-1100, ext. 2263
UK: 0845 607 77 87
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 65 64857620
Europe: www.belkin.com/support
Belkin International, Inc.
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
[phone]
[phone] fax
Belkin Ltd.
4 Pioneer Avenue
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
[phone]
[phone] fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
[phone]
[phone] fax
© 2009 Belkin International, Inc. All rights reserved. All trade names are registered
trademarks of respective manufacturers listed.
8820-00071
2-Port Reverse KVM Switch

Start Here
Quick Installation Guide F1D201
2-Port Reverse KVM Switch