Berlin Gardens GCDT0048D Firmware update

FM - 62
#GCDT0048D, #GCDT0048C, #GCDT0048B
HARDWARE PACKAGE
8 ¼" x 2" Carriage Bolts
8 ¼" Flange Nuts
2 Umbrella Knobs
16 3" Screws
12 1½" Screws
PACKAGE CONTENTS
1Top
2 Bases
1 Cross Support
2 Footrests (Bar and Counter Heights)
4 Braces
1 Hardware Package
TOOLS NEEDED:
Hammer
7/" Wrench
Cordless Drill/Screwdriver
Firmly tap bolts into pre-drilled
holes before tightening.
CORRECT INCORRECT
1 2 34 5
Use to measure bolts
Garden Classic
Daisy Table
Umbrella
Holder
Cross Support
Base
Upright
Top Boards
Apron
Brace
Garden Classic
Footrest
Be sure to
use 1½"
screws when
fastening
braces.
!
NOTE: Bar and
Counter Height Only
Assembly Directions for
48" Round Table

FM - 63
Umbrella
Knobs
STEP #1 - Fasten the rst base to the aluminum frame
using 4- ¼" x 2" carriage bolts.
STEP #2 - First fasten the cross support to the base using
3" screws. Second fasten the two footrests to
the upright using 3" screws. (Counter and Bar
height only.)
STEP #3 - Fasten the second base to the aluminum frame
using 4- ¼" x 2" carriage bolts. Second attach
the cross support and footrest using 3" screws.
STEP #4 - Fasten the four braces using 1½" screws.
Your 48" Round Table is complete!
¼" x 2" Carriage Bolts
3" Screws
Cross Support
Footrest
¼" x 2" Carriage Bolts
1½" Screws
3" Screws