Berlin Gardens Mayhew Sling User manual

Step 1
Set the Arm and Seat Assembly forward onto the front of the
Arms and set the Back Assembly on top. Be sure to do this
on top of a soft surface to avoid damaging the arms.
Fasten the Back to the Seat using eight - 4" Buglehead Screws.
Keeping the Arms Supports even with the outside edges of the
Back, fasten them using two - 3" Buglehead Screws.
Mayhew Sling
Counter & Bar Swivel
Chairs Assembly Guide
Tools Required
Hardware Included
Cordless Drill #2 Square Drive Bit
(Included)
Allen Wrench
(Included)
2 - 3"
Buglehead
Screws
8 - 4"
Buglehead
Screws
4- 1/4" x 3/4"
Flangenuts
Bar Height
Counter Height
Back Assembly
Arm & Seat Assembly
Keep the Arm Support even with the outside edge of the Back.
3" Buglehead Screws 4" Buglehead Screws
Wrench
4- 1/4" x 3/4"
Allenhead Bolts Swivel Mechanism

Step 2
Fasten the swivel stem to the aluminum frame
located under the seat using 4 - 1/4" x 3/4"
allen head bolts and flange nuts. Be sure to
tighten firmly.
Step 3
Lift the top of the chair and set the swivel stem
into the receiver of the base. Push firmly onto the
chair until it sits securely in the receiver.
Step 2 Detail
1/4"x 3/4" Allen Head Bolts
1/4" Flange Nut