Berlin Gardens Harbor User manual

Harbor Table Assembly Guide
Tools / Items Needed
Cordless Drill
#2 Square Drive Bit
Allen Wrench
(Included) 7/16" Wrench
Hardware Included
1
4
" x 2"
Bolt x8
1
4
" Flange
Nut x8
1
1
2
" Buglehead
Screw x4
Does not apply
to 28" Sq, 33" Sq,
and 38" Round
3" Buglehead
Screw
5
8
" Panhead
Screw x8
Does not apply
to 28" Sq, 33" Sq,
and 38" Round
Umbrella Knob x2
Dining Height x8
Counter Height x16
Bar Height x16
Dining Height Counter Height Bar Height
Harbor Table Assembly 28" Sq, 33" Sq, 33"x66", 38" Round, 48" Round,
44" Sq, 44"x64" Oblong Tables (Dining, Counter & Bar Heights)

Step 2
Step 3
Start by placing the assembled base on the table top. Line up
holes in base ends with holes in the aluminum frame on the
table top and attach base to frame using 1/4"x2 Bolts and
1/4" Flange Nuts. Next Fasten the Umbrella Knobs to the
Umbrella holder in the predrilled holes as detailed, these are
hand tightened. Note: Ensure bolts and nuts are properly
secured using a wrench and supplied Allen Wrench.
Applies to the following sizes of tables-33"x66",44"Sq,44"x64",48" Round.
Start by placing a table brace against the bottom of the table top and
against the inside of a base leg. Fasten the brace against the leg using 1,
1-1/2" Buglehead Screw. Next fasten the aluminum piece against the top
using 2, 5/8" Panhead Screws. Note: The aluminum piece that is fastened
aginst the brace should be placed against the table top.
Step 1
Open the box containing the Table top on all sides but
leave the top laying in the box for assembly steps 1 and 2.
Next fasten all cross pieces to 1 base assembly by inserting
cross piece tenons into mortises on base assembly and
fasten using 3" Buglehead Screws. Repeat assembly on
other side with remaining base assembly. NOTE: Dining Height
will only have 1 set of cross pieces. A
Step 1 Detail
Counter and Bar Height Only
Step 2 Detail
Umbrella Knob Placement
3" Buglehead Screws
1/4"x2" Bolts 1/4"x2" Bolts
1/4" Flange Nuts
Step 3 Detail
5/8" Panhead Screws
1-1/2" Buglehead
Screws