Berlin Gardens PZDC2127 Firmware update

Assembly Directions for
Comfo Cozi Dining Chair
#PZDC2127, #PEDC2127
STEP #2 - Repeat step one.
STEP #3 - Your Chair is complete!
HARDWARE PACKAGE
4 ¼" x 3½" Allen Head Bolts
2 ¼" x 3¼" Allen Head Bolts
2¼" x 2½" Allen Head Bolts
8 ¼" Flange Nuts
PACKAGE CONTENTS
1 Back
1 Seat
2 Arms with Legs
1 Hardware Package
TOOLS NEEDED:
Hammer
" Wrench
Allen Wrench (included)
Firmly tap bolts into pre-drilled
holes before tightening.
CORRECT INCORRECT
1 2 34 5
Use to measure bolts
Seat Slat
Back Slat
Right Arm
Left Arm
Front Leg
Back Leg
Cozi-Back Chair
Comfo-Back Chair
STEP #1 -
A. Attach the seat to the back using 1- ¼" x 3¼" Allen Head Bolt
and Flange Nuts.
B. Attach the arm assembly to the Seat and Back using
2- ¼" x 3½" and 1- ¼" x 2½" Allen Head Bolts and Flange Nuts.
¼" x 3½" Allen Head Bolts
B.
¼" x 2½" Allen Head Bolt
B. ¼" x 3¼" Allen Head Bolt
A.

Assembly Directions for the
Homestead Table
Item Number: HDT0044D, HDT4472D
1 2 34 5
Use to measure bolts
PACKAGE CONTENT
1 • Table Top
4 • Leg Assemblies
1 • Hardware Package
HARDWARE PACKAGE
24 • 1 1/4” Pandeck Screws
1 • #2 Sq. Drive Bit
TOOLS NEEDED
Cordless Drill
44” Homestead Table
44” x 72” Homestead Table
Leg Assembly
Leg Assembly
Table Top
Table Top

Step #1
Lay the Table Top upside down on a Car-
pet, or Blanket. Set the Leg Assembly in the
corner. Align Holes in Table Top with the
holes in the Leg Assembly, and fasten using
1 1/4” Pandeck Screws.
is screw goes directly in the poly.