Body Craft Jones Light Commercial User manual

1
Jones Light Commercial (LC) Machine
Owners Manual
Record your Product Registration Info here:
Serial Number:__________________________
Purchase Date:__________________________
Dealer Name:___________________________
Register your product at www.bodycraft.com
Click the link at the top of the page.
5049
1
2
3
4
5
6
7
8
9
10
11
12
13

2

1
BEFORE YOU BEGIN
Congratulations and thank you for selecting the Jones Light Commercial
Machine. The Jones Light Commercial offers an impressive array of strength
training exercises to develop every major muscle group of the body. Whether your
goal is cardiovascular fitness, a shapely, toned body or dramatic muscle size and
strength, the Jones Light Commercial will help you achieve the specific results you
want. For your safety and benefit, read this manual and the accompanying
literature before using the Jones Light Commercial. Keep this manual for future
reference. If you have additional questions, please call your local dealer or our
customer service department at 800-990-5556 Monday through Friday, 9 a.m. until
5 p.m. Eastern Time.
IMPORTANT SAFETY NOTES
There is a risk assumed by individuals who use this type of equipment. Before
beginning this or any other exercise program consult your physician. This is
especially important for individuals over the age of 35 or persons with pre-existing
health problems. Recreation Supply, Inc. assumes no responsibility for personal
injury or property damage sustained by or through use of this product.
1. This product must be assembled on a flat, level surface to assure its proper function.
2. Clean pads and frame on a regular basis. We recommend warm,
soapy water. Do not use harsh or abrasive chemicals.
3. Inspect and tighten all parts before every use. Replace any worn
parts immediately. Failure to do so may result in serious injury.
4. Keep children away from the JONES MACHINE COMMERCIAL
at all times.
5. Keep your hands away from moving parts other than the designated
handles.
6. Exercise with care to avoid injury.
7. If lubrication is needed, apply MP NO 2.5 Lithium Grease to Vertical
Guide Rod (12), Base Bearing Rod (13) and Top Bearing Rod (14).
8. If unsure about the proper use of the JONES MACHINE
COMMERCIAL strength training system call your local dealer or
our customer service department at 800-990-5556.

2
1 2 3 4 5 6 7 8 9
10
11
12 13
9
14
49
492
3
42 42
42 51
51
51
12
35
15L
41A
34
26
45
51
51
24
25
33
46 54
351 27
55 53 52
37 36
37
29
32
28
22
34
1
49
13
49
23
50
58
50
50 54
54 58
21 36
52
27
19
44
39
39 22
51
51 55
55
51
55
51
55
54
50
55
55
51
51
44
51 51
51
40 50
50
54
37
20 37
53
10
11
37
53
9
11
53 37
17L
37
53
5
7
14 49
9
3 3
34
16R
41A
35
24
27
12
26
27
4
4
52
21
52
25
33
13
1
36
2
53
18R
6
29
23 32
28 23
38
44
53
20
55
51
55
55
51
51
55
44
51
50
54
54
40
50
50
40
23
50
42
42
51
51
42
42
51
51
41
51
47
56 56
47
48
50
41
55
55
51
44
51
50
54
50
50
50
40
54
49
40
54
55
51
51
55
44
44
55 51
50
55
53
45
51 36
38
38
34
42
51 42
51
51
42
51 42
49
49
52
46
42
42
42
51
51 42
51
51
54
49 50
50
37 40
45
45
51
44
55 55
51 51
51 51
51
55 55
44
44
47
48
51
51 51
51
47 56
56
49
49
OVERVIEW
FRONT

3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15L
16R
17L
18R
19
20
21
22
23
24
25
26
27
28
29
32
33
34
35
36
37
38
39
40
41
41A
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
2
2
4
2
1
1
1
2
1
1
2
2
2
2
1
1
1
1
1
2
2
2
4
2
2
2
4
2
2
2
2
4
2
4
8
4
2
8
2
2
16
1
16
8
2
8
4
16
24
78
4
8
14
38
12
1
2
BASE FRAME L & R
TOP FRAME L & R
UPRIGHT FRAME
BASE CONNECTOR
TOP BEARING HOUSING CONNECT
CHIN UP BAR
REAR TOP FRAME
LOGO PANEL
RIGHT BAR RACK
LEFT BAR RACK
RACK HOLDER
VERTICAL GUIDE ROD
BASE GUIDE ROD (pre-assembled in Base Frame)
TOP GUIDE ROD (pre-assembled in Base Frame)
LEFT BASE BEARING HOUSING (pre-assembled in Base Frame)
RIGHT BASE BEARING HOUSING (pre-assembled in Base Frame)
LEFT TOP BEARING HOUSING (pre-assembled in Top Frame)
RIGHT TOP BRARING HOUSING (pre-assembled in Top Frame)
WEIGHT BAR
VERTICAL BEARING HOUSING
SAFETY CATCH (pre-assembled at factory)
SAFETY SPOTTER
LINK PLATE (pre-assembled with Safety Spotter)
HOOK PLATE (pre-assembled on Weight Bar)
OLYMPIC WEIGHT SLEEVE
19 X 13 X 70L CONNECT ROD (pre-assembled on Weight Bar)
34 X 29 X 8L SPACER (pre-assembled on Weight Bar)
19 X 13 X 15L SHORT CONNECT ROD
(pre-assembled on Safety Spotter)
1" ID BIG WASHER
1" SPRING
2" OLYMPIC SPRING CLIP
RUBBER STOPPER (pre-assembled in Base Frame)
POP PIN (pre-assembled in Base Frame)
25mm BEARING (pre-assembled in Base Frame)
2 5mm BEARING (pre-assembled in Vert., Top Bearing Housings)
30mm BEARING (pre-assembled in Base Frame)
1/2" X 4" HEX BOLT
1/2" X 3-1/4" HEX BOLT
1/2" X 1-3/4" HEX BOLT
1/2" X 3" HEX BOLT
3/8" X 4" HEX BOLT
14mm HEX WRENCH
3/8" X 2-3/4" HEX BOLT
3/8" X 1-1/4" HEX BOLT
1/2" X 1-1/4" ALLEN BOLT
M8 X 20mm ALLEN BOLT
M8 X 15mm ALLEN BOLT
5/16" X 1/4" SET SCREW
1/2" WASHER
3/8" WASHER
LARGER RETAINING RING (pre-assembled in Weight Bar)
SMALL RETAINING RING (pre-assembled in Vert Bearing Housings)
1/2" NYLON NUT
3/8" NYLON NUT
5/16" SPRING WASHER
3mm HEX WRENCH
PLASTIC KNOB
1 2 3
4 5 6 7 8 9 10
11
12 13
14 15L 16R 17L 18R
19 20 21 22
23 24 25 26 27 28
32 33 34 35 36 37 38
39
40
41
42
43
44
45
48
46
49
50
51
29
52
53 54 55
47
41A
56 57 58
PARTS LIST
NO. DESCRIPTION QTY.
0 1/4 1/2 3/4 1" 1/4 1/2 3/4 2" 1/4 1/2 3/4 3" 1/4 1/2 3/4 4" 1/4 1/2 3/4 5" 1/4 1/2 3/4 6"
(inch)

4
STEP 1 Base Frame Assembly
3
42 51
51
1
16R
1
51
51
51
51
51
51
51
51
51
51 42
42
55
55
55
4
4
55
42
3
3
3
15L
IMPORTANT:
˙ Assembly requires two people.
˙ To ease the assembly process, do not tighten bolts until instr ucted.
˙ Assemble on a flat, level floor.
1. Slide an Upright Frame (3) onto each end of the Left and Right Base Frame (1)
and attach the two Base Connectors (4) using two 3/8" X 4" Hex Bolts (42), four
3/8" Washers (51) and two 3/8" Nylon Nuts (55) at each corner.

5
STEP 2 Rack and Top Frame Assembly
40
40
50
17L
18R
50
49
49
2
2
54
50
12
12
11
11
9
10
44
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
55
3
3
3
3
29
32
22
20
20
29
32
1
22
49
49
51
44
44
55
55
55
55
44
44
44
44
44
55
55
55
55
55
55
44
44
44
44
44
44
54
50
55
15L
16R
1
2
3
4
5
6
7
8
9
10
11
12
13
1. Loosen the 5/16" X 1/4" Set Screws (49) on the ringlet welded to the Base Bearing
Housings (15L, 16R) and insert the two Vertical Guide Rods (12). Slide the Safety Spotter
(22), then the 1" Spring (32), then the 1" ID Big Washer (29), and finally, the Vertical
Bearing Housing (20) over the top of Vertical Guide Rod (12) as shown. Make sure the
Handle of the Safety Spotter (22) is oriented toward the inside of the machine (as shown in
A and B).
2. Slide the Rack Holders (11) onto the
square receptacles on the Base
Bearing Housings (15L, 16R) and
secure using two 3/8" X 2-3/4" Hex
Bolts (44), four 3/8" Washers (51), and
two 3/8" Nylon Nuts (55) on each Rack
Holder (11). Than attach the Right and
Left Bar Rack (9,10) to the inner side
of each Rack Holder (11), using six
3/8" X 3" Hex Bolts (43), twelve 3/8"
Washers (51) and six 3/8" Nylon Nuts
(55).
3. Loosen the 5/16" X 1/4" Set Screws
(49) on the ringlet welded to the Top
Bearing Housings (17L, 18R). Slide
one Top Frame (2) over top of the
Vertical Guide Rod (12), and Upright
Frame (3). Secure the Top Frame (2)
to the Top Bearing Housing (17L, 18R)
using two 1/2" X 3-1/4" Hex Bolts (40),
four 1/2" Washers (50) and two 1/2"
Nylon Nuts (54). Repeat for the other
side.
A
B
FRONT
REAR
A
B

6
1
2
3
4
5
6
7
8
9
10
11
12
STEP 3 Chin Up Bar and Rear Top Frame Assembly
42
42
51
51
51 8
3
2
7
6
55
55
55
55
51
51
51
51
55
55
51
51
2
3
3
3
8
42
51
51
51
42
51
51
1. Attach the Chin Up Bar (6), Rear Top Frame (7), and the two Logo Panels (8)
to the Top Frames (2) using four 3/8" X 4" Hex Bolts (42), eight 3/8" Washers
(51) and four 3/8" Nylon Nuts (55).
FRONT
REAR

7
STEP 4 Weight Bar Assembly
5
50
25
55
55
51
51
20
51
51
51
51
20
55
25
46
33
55
45 19
45
45
51
45
46
33
50
50
50
50
50 17L
54
54
40
40
18R
1
2
4
5
6
7
8
9
10
1. Attach the Weight Bar (19) to the Vertical Bearing Housing (20) using two 3/8" X 1-1/4"
Hex Bolts (45), four 3/8" Washers (51) and two 3/8" Nylon Nuts (55).
2. Slide the Olympic Weight Sleeve (25) onto each side of Weight Bar (19) and secure with
a 1/2" X 1-1/4" Allen Bolt (46). Use the 2" Olympic Spring Clip (33) to hold weights in
place during use.
3. Attach the Top Bearing Housing Connector (5) to the Right and Left Top Bearing
Housings (17L & 18R) using two 1/2" X 3-1/4" Hex Bolts (40), four 1/2" Washers (50),
and two 1/2" Nylon Nuts (54).
Tighten all bolts. Start at Base and work toward top. If horizontal movement is not
completely smooth, tr y loosening the Allen Bolts on the Bear ing Housings that
hold the bearings in place, and then re-tighten. The bear ings will seat onto
the guide rods.

8

9
Thank you for purchasing the Jones Light Commercial M achine.
If you have any questions, please call your local BodyCr aft dealer
or call our customer ser vice department at 800-990-5556.
Assembly is complete! Please take the following steps befor e using the
BODYCRAFT JONES M ACHINE:
IMPORTANT
TIPS FOR PROPER AND SAFE USE
• ALWAYS utilize the Safety Spotters. Failure to do so
can result in serious injury.
• Remember that the lifting bar is hooked into place by
rotating the bar toward the chromed hooks.
• Be certain that both hooks are fully engaged before
removing your hands from the lifting bar.
• Inspect the machine before every use. Do NOT use
the machine if you find any irregularities.
• Be sure to register your warranty by submitting a
completed warranty registration form.
• This product must be assembled on a flat, level surface
to assure its proper function.
• If unsure about the proper use of the BodyCraft Jones
Machine, call your local BodyCraft dealer or our
customer service department at 800-990-5556.
WEIGHT LIM I TATIONS FOR THE LI FTI NG BARS
JB7N 7’ Long, 35l b. Steel with Nylon Ends. 500lbs Capacity
JB7PB 7' Long, 50 lb. Steel Power Bar, 1000 lb. Capacity.
JB7ABB 7' Long, 55 lb. Steel Power Bar, 1000 lb. Capacity.