BorMann PRO BTC5105 User manual

Art Nr:
WWW.NIKOLAOUTOOLS.GR
EN FR
BTC5105
065364
IT EL
BG SL
RO HR
v2.2

EN
WWW.NIKOLAOUTOOLS.GR
2
WARNING
To reduce the risk of injury, all operators and maintenance personnel must read and understand
these instrucons before operang, changing accessories or performing maintenance on equipment
we produced. All possible situaons cannot be covered in these instrucons. Care must be given by
everyone using, maintaining or work near this equipment.
CAUTION
NO OIL IN ENGINE
Fill the engine with oil to the correct level before starng the engine.
Technical Data
Model BTC5105
Power Engine 6,5HP (4,1 kW)
Engine 196cc
Impact depth 20cm
Impact Force 10,5 kN
Frequency (ipm) 5600 vpm
Vibraon Frequency 93 Hz
Size of plate 50x36cm
Weight 62 Kg
Includes Foldable handle, trolley
wheel, rubber mat
SPECIFICATIONS
* The manufacturer reserves the right to make minor changes to product design and technical specicaons without prior
noce unless these changes signicantly aect the performance and safety of the products. The parts described / illustrated in
the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with
similar features and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspecon, repair or replacement work,
including maintenance and special adjustments, must only be carried out by technicians of the authorized service department
of the manufacturer.
* Always use the product with the supplied equipment. Operaon of the product with non-provided equipment may cause
malfuncons or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages
resulng from the use of non-conforming equipment.
APPLICATIONS
The Plate Compactor is a machine that compacts the ground and it intends to make the surface smooth, by transming vibraon through vibrang plate,
which power is generated from a single motor in vibrator case. This machine is suitable for making the ground surface smooth, leveling the soil, beaching, and
nishing the asphalt paving.
Applicaons as follows:
• Trench compacon Earth works
• Road maintenance Landscaping
• Brick paving Driveway toppings
• Earth works
• Landscaping
• Driveway toppings
This machine is hard to move forward on soil with much water (especially clay soil). It is not suitable for such applicaon. This machine is dicult to level
ground including big stones due to insucient compacng force. Plate compactor is mainly used for compacng surface smoother and it is nor eecve for
jobs that require heavy compacon. In case of compacng ground deeply into lower layer, it is recommended for use. Tamping Rammer, Vibrator Compactor
and Vibraon Roller, which compact force, are rather eecve. Please use this compactor for compacng surface soil, sediment, sand, beaching and asphalt. It
is not recommended to be used for the other applicaons.
Warning for incorrect applicaon and abuse

EN
WWW.NIKOLAOUTOOLS.GR
3
Motor:
The motor is controlled by an ON/OFF switch or push buon, which is mounted on the motor below the fuel tank. The motor speed is controlled by a remote
throle lever which is mounted on the machine handle. The motor is ed with an oil alert device which will stop the motor or prevent starng.
The motor speed is controlled by a remote throle lever which is mounted on the machine handle. The motors are ed with an oil alert device which will stop
the motor or prevent starng when the crankcase oil level falls below a safe level.
Drive belt:
Tension of the drive belt is adjustable. Loosen the four nuts which secure the motor to the base plate, adjust the set screws, which bear against the motor
crankcase to achieve the required belt tension. Ensure that the four nuts and the set screw lock nuts are ghtened aer adjustment.
FUNCTIONS AND CONTROLS
FOR SAFE OPERATION
This safety alert symbol idenes important safety messages throughout this manual and on the machine.
When you see this symbol, carefully read the message that follows. Your safety is at stake!
Foreword:
It is important to read this manual carefully so that you will fully understand the operaonal characteriscs and performance of the plate compactor. Proper
maintenance procedures will insure long life and top performance of the unit.
Safety:
This secon outlines basic safety procedures that apply to the operaon, maintenance and adjustment of the plate compactor. This unit is designed as a
powerful, producve machine that should be operated with respect and cauon. Misuse or carelessness can result in serious injury or damage or both. Safety
precauons must be observed at all mes.
Operator Qualicaons:
Before operang this equipment, the individual should read this manual. Whenever possible, he should be shown how to operate the unit by an experienced
operator. Inexperience is hazardous in operang any machine or aachment. Trial and error is not the way to become familiar with a piece of equipment. This is
expensive, diminishes equipment's life. The machine should not be le unaended when operang.
CAUTION
General Safety:
Protecon is required. Wear hard hat, shaerproof glassed, steel toed boots and other protecve devices required by job condions. Avoid jewellery or loose
clothing. These could be caught in controls or in moving parts and cause serious injury.
Starng Safety:
Poisonous fumes. Start and operate only in well venlated area. Breathing exhaust gases can result sickness or death.
Servicing Safety:
Flammable liquid: Stop engine and do not smoke or allow work in immediate area when refueling. Fire or explosion could result from ames or sparks.
Moving parts: Shutdown engine before performing.
Service or maintenance: Contact with moving parts can cause serious injury.
Temperature: Allow machine and engine to cool before performing service or maintenance. Contact with hot components can cause serious bums.
SHUTDOWN
EMERGENCY SHUTDOWN
Move throle lever to “OFF” posion and also turn stop switch to “OFF”.
NORMAL SHUTDOWN
Move throle lever quickly from “ON” to “OFF” and run the engine for 3 to 5 minutes at low speed. When engine cools, turn stop switch to “OFF” posion,
close the shuto fuel valve.

EN
WWW.NIKOLAOUTOOLS.GR
4
HAZARDS AND RISKS
Never allow any person to operate the machine without adequate instrucons.
Ensure that all operators will read, understand and follow the operang instrucons.
Serious injury could result from improper or careless use of this machine.
Plate compactors are heavy units and should be posioned by two people of appropriate strength, using the liing handles provided on the machine, along
with the correct liing techniques.
MECHANICAL HAZARDS
Do not operate the machine unless all protecve guards are in place.
Keep hands and feet clear of rotang and moving parts as they will cause injury if contacted.
Ensure that the motor operaon switch is in the OFF posion and the spark plug ignion lead is disconnected before removing the guards or making adjustments.
Ensure that both the machine and the operator are stable by seng up on level terrain and the machine will not p over, slide or fall while in operaon or
unaended.
Do not leave the machine in operaon while is unaended.
Ensure that the walls of a trench are stable and will not collapse due to the acon of vibraon, prior to commencing compacon.
Ensure that the area to be compacted does not contain any “live” electrical cables, gas, water or communicaon services which may be damaged by the acon
of the vibraon.
Exercise care when operang unit. Exposure to vibraon or repeve work acons may be harmful to hands and arms.
Never stand on the unit while it is operang.
Do not increase the governed no-load motor speed above 3.500 r/min. Any increase may result personal injury and damage to the machine.
Be careful not to contact with muer when the engine is hot, since it can cause severe burns.
Ensure that repairs to the motor and machine are carried out by specialists.
FIRE AND EXPLOSION HAZARDS
Petrol is extremely ammable and explosive under certain condions.
Ensure that petrol is only stored in an approved storage container.
Do not refuel the motor while it is in operaon or hot.
Do not refuel the motor in the vicinity of sparks, a naked ame or a person smoking.
Do not overll the fuel tank and avoid spilling petrol when refueling. Spilled petrol or petrol vapor may ignite. If spillage occurs, ensure that the area is dry
before starng the motor.
Ensure that the fuel tank cap is securely ed aer refueling.
CHEMICAL HAZARDS
Do not operate or refuel a petrol or diesel motor in a conned area without adequate venlaon.
Carbon monoxide exhaust gases from internal combuson motor driven units can cause death in conned spaces.
NOISE HAZARDS
Excessive noise can lead to temporary or permanent loss of hearing.
Wear an approved hearing protecon device to limit noise exposure. As required by Occupaonal Health and Safety regulaons.
PROTECTIVE CLOTHING
Always wear approved hearing protecon when working in a conned work space. Protecve goggles and a dust mask should be worn when working in a dusty
environment. Protecve clothing and footwear may also be desirable when working with hot mix bitumen.
ADDITIONAL HAZARDS
Slip/Trip/Fall is a major cause of serious injury or death. Beware of uneven or slippery work surfaces.
Take care when working in the vicinity of unprotected holes or excavaons.

EN
WWW.NIKOLAOUTOOLS.GR
5
OPERATION
GENERAL OPERATION
The machine is best suited to the compacon of bituminous and granular materials e.g. granular soils, gravels and sands or mixtures of both. Cohesive soils
such as silt and clay could be beer compacted by the use of the impact force produced by a vibrang rammer.
Where possible, the site should be graded and leveled before commencing compacon.
Correct moisture content in soil is vital to proper compacon. Water acts as a lubricant to help soil slide parcles together. Too lile moisture means inadequate
compacon; too much moisture leaves water-lled voids that weaken the soil’s load bearing ability.
Use unleaded grade petrol and ensure that the fuel is free from contaminaon.
The vibratory moon provides a self propelling acon. Posion the handle at the opposite end of the machine to the vibrator.
Start the motor using the recoil starter. (If the motor is ed with an on/o switch this must rst be turned to ON before starng.)
Increase the motor speed to the maximum seng, using the hand throle lever, before commencing compacng.
The machine should be controlled by grasping the handle with both hands and applying restraint to control the forward moon. If forward or backward moon
is problemac, adjust the red handle or nuts (item 21, 22 in components list), steer the machine by moving the handle sideways to the right or le.
Always maintain good foong so that you do not slip and loose control when starng or operang the machine.
PRIOR TO OPERATION
• Make sure that all dirt, etc., are thoroughly removed from the unit prior to operaon. Special eort should be given to the buon face to the vibrang plate
and those areas adjacent to the cooling air inlet of engine, carburetor, and air cleaner.
• Check all bolts and screws for ghtness and make sure all bolts and screws are securely ghtened. Loose bolts and screws may cause damage to the unit.
• Check the V-belt for ghtness. The normal slack should be approximately 10-15 mm (1/2’’) when the belts are forcibly depressed in the middle posion
between the two sheaves.
• If there is excess belt play. There could be a decrease in the impact force or errac vibraon, causing machine damage.
• Check the engine oil level and if it is low, it should be relled. Use the proper motor oil as suggested in the table below. (Fig.1)
• Remove the oil plug in the vibrator assembly and check the oil level. Make sure the compactor's level when checking. The oil level should be up to the oil
plug. Every month or every 200 hours of operaon, replace the oil.
Season Temperature Grade of Motor oil
(higher than MS class)
Spring, Summer or Autumn
+120oF to +40oFSAE 30
Winter
+40oF to +15oFSAE 20
Below +15oFSAE 10W-30
UPPER LEVEL
LOWER LEVEL
OIL GAUGE
(OIL FILLER)
Fig.1
IMPORTION
Use the motor oil SAE
• When changing the oil, the old oil can be drained by pping the unit. The oil will drain easily while is hot.
• A regular grade gasoline should be used in the engine.
• When lling the fuel tank, make sure the fuel lter is used.
CAUTION
• Be careful with the operang place and venlaon. Avoid operang the machine in a closed room, tunnel, or other badly venlated places, since its exhaust
contains deadly poisonous carbon monoxide. If the machine is employed unavoidable operated in such a place, discharge the exhaust out of the room by
suitable means.
• Be careful with hot members. Muers and other hot members are dangerous. Do not touch them with unprepared hand.
• Observe the following cauons when transporng. Tighten the fuel tank cap securely and turn o the fuel supply during the draining of petrol from the fuel
tank before transporng over long distances or uneven roads.
• Stop engine without fail before replenishing fuel tank. Never replenish gasoline while the engine is running or remains hot, otherwise spilled or evaporated
fuel is liable to catch re from engine sparks or muer heat. Wipe o spilled fuel, if any, before starng engine. Be careful not to spill fuel.
• Keep inammable way from the vicinity of the exhaust port. Be careful with the use of inammables, since the exhaust port is subjected to a high temperature.

EN
WWW.NIKOLAOUTOOLS.GR
6
STARTING
Gasoline Engine
• Turn the STOP switch clock-wise to the posion “I” (ON). (Fig.2)
• Open the fuel cock. (Fig.3)
• Set the speed control lever 1/3 to 1/2 of the way towards the high
speed posion. (Fig.4)
Close the choke lever
• If the engine is warm or the ambient temperature is high, open the
choke lever half-way, or keep it fully open.
• If the engine is cold or the ambient temperature is low, close the
choke lever fully. (Fig.5)
• Pull the starter handle slowly unl resistance is felt. This is the
“compression” point.
• Return the handle to its original posion and pull swily.
• Do not pull out the rope all the way.
• Aer starter the engine, allow the starter handle to return to its
original posion while sll holding the handle.(Fig.6)
Diesel Engine
• Turn the throle lever to START posion (open about 30 degrees).
(Fig.7)
Operate Starter
• In case of recoil starter pull the starter knob slowly, you will reach a
point where resistance becomes stronger (compression point). By
pulling it further, you will nd a point where resistance is reduced.
Return the knob slowly to its original place. (Fig.7)
CAUTION
Fig.2 Fig.3
Fig.4 Fig.5
Fig.6 Fig.7
STOP SWITCH
"I" (ON)
"O" (OFF)
FUEL COCK
OPEN
CLOSE
SPEED CONTROL LEVER CHOKE LEVER
RECOIL STARTER THROTTLE LEVER
Open
about 30
degrees
Do not pull the rope all the way and do not take you hand o the pulled knob but slowly return it original posion.
Aer starng up the engine, be sure to perform a warm up for 2 to 3 minutes. This should be performed without fail, parcularly during winter season.
OPERATION
• As the engine warms up, gradually move the choke lever to the
OPEN posion. (Fig.8)
• Move the speed control lever from the Low to the High posion.
When the engine speed reaches approximately 2,300-2,600rpm,
the centrifugal clutch engages. If the engine speed increased very
slowly, it is possible that the clutch can slip. Do not operate the
speed control lever slowly. (Fig.9, 10)
OIL ALERT SYSTEM (Oponal)
• The Oil Alert system is designed to prevent engine damage caused
by an insucient amount of oil in the crankcase. Before the oil level
in the crankcase can fall below a safe limit, the Oil Alert System will
automacally stop the engine (the engine switch will remain in the
ON posion).
Fig.8
CHOKE LEVER
Fig.9
SPEED CONTROL LEVER
Fig.10
SPEED CONTROL LEVER
at handle

EN
WWW.NIKOLAOUTOOLS.GR
7
TRANSPORTATION
Be sure to stop the engine while transporng.
Screw up the fuel tank cap securely and close the fuel valve to avoid fuel leaking.
In transportaon by car, place the machine in a secure way so not to move or fall down. In case of driving a long distance or o-road, remove fuel from tank.
SHUTDOWN
To stop the engine in an emergency, turn the stop switch to the OFF
posion.
Under normal condions, use the following procedure:
• Set the speed control lever at the low speed posion and allow
the engine to run at low speed for 2 or 3 minutes before stopping.
( Fig.11)
• Tum the stop switch to the OFF posion. (Fig.12)
• Close the fuel cock. (Fig.13)
OPEN
CLOSE
STOP SWITCH
FUEL COCK
Fig.11
Fig.12
Fig.13
Fig.14
SPEED CONTROL LEVER
AIR CLEANER
ELEMENT
URETHANE FOAM
SERVICE AND STORAGE
CAUTION
Flammable liquid: Stop engine and do not smoke or allow work in immediate area when refueling. Fire or explosion could result from ames or sparks.
Moving parts: Shutdown engine before performing service or maintenance. Contact with moving parts can cause serious injury.
High temperature: Allow machine and engine to cool before performing service or maintenance. Contact with hot components can cause serious burn.
Daily Service
• Remove mud, dirt, etc, from the unit.
• Clean boom face of the vibrang plate.
• Check the air cleaner element and clean if necessary.
• Check all nuts, bolts, and screws for ghtness and re-ghten as necessary.
Weekly Service
AIR CLEANER SERVICE (Fig.14)
Dirty air cleaner element will cause starng diculty, power loss, engine malfuncons, and shorten engine life extremely.
Keep the air cleaner element clean.
URETHANE FOAM ELEMENT
Remove the element and wash it in kerosene or diesel fuel. Then saturate it in a mixture of 3 parts kerosene or diesel fuel and 1 part engine oil. Squeeze the
element to remove the mixture and install it in the air cleaner.

EN
WWW.NIKOLAOUTOOLS.GR
8
URETHANE FOAM DUAL STRUCTURE
• Clean the urethane foam in the same way as described above.
• Wash the element in kerosene or diesel fuel. Saturate it in a mixture of 3 parts kerosene or diesel fuel and 1 part engine oil. Shake o excessive oil.
• Remove spark plug, clean and adjust the spark plug gap to 0.6-0.7mm (0.02-0.03 in). (Fig.15)
• Drain the motor oil of the engine and replace with new specied oil. (Fig.16)
NOTE
When the engine is new, the rst oil change must be made aer 20 hours of operaon and replenish the oil tank before operang.
Monthly Service
Change the oil in the vibrator assembly.
Storage
When storing the compactor for long periods aer operaon:
• Thoroughly drain the fuel from the fuel tank, fuel pipe and carburetor.
• Pour a few drops of motor oil into the cylinder by removing the spark plug.
Rotate the engine several mes by hand so that the cylinder interior is
covered with oil.
• Clean the outer surface of the machine with an oil moistened cloth.
• Cover the unit and store in a humidity-free area.
Fig.16
MOTOR OIL
SPARK PLUG
Fig.15
CARE & PREVENTIVE MAINTENANCE
Check the oil level in the motor crankcase daily. Check the vibrator oil level weekly. Inspect the rubber anvibraon mounts for wear or deterioraon. Clean the
underside of the plate regularly to prevent a build up of material.
SERVICE
Change the oil in the motor crankcase regularly to minimize wear. Inspect,
clean and/or replace the motor air cleaner regularly, parcularly when
operang in a dusty environment. Inspect, clean and/or replace the spark
plug regularly. Check all fasteners for ghtness as the machine is subject to
vibraon. Check V belt tension, wear and that it is running correctly. Adjust
or replace as required.
Vibrator oil check
1. Place the plate compactor horizontally on a at surface. Make sure the
compactor is level when checking the oil in the vibrator assembly.
2. Check vibrator oil level by removing the plug (vibrator oil gauge) as shown
in Fig.17. The oil level should be up to the oil plug. If oil is required, replace
using SAE motor oil, as suggested in the table Fig.1.
3. When changing the vibrator oil, remove the drain plug (Fig.17), and simply
p the compactor to drain the oil. Note that the oil will drain more easily
while it is hot.
VIBRATOR
Fig.17
VIBRATOR OIL PLUG

EN
WWW.NIKOLAOUTOOLS.GR
9
TROUBLESHOOTING
BEARINGS
The following bearings are sealed:
• Centrifugal clutch - grease lubricated
• Vibrator - oil bath lubricated
FINISH
The machine is nished in gold equipment enamel, the handle in black backed enamel. Exposed metal surface is zinc electroplated for corrosion protecon.
SYMPTOM POSSIBLE CAUSES AND CORRECTION
Motor will not start
• Check the ON/OFF switch to ensure that it is switched "ON".
• Check the fuel supply.
• If a motor is ed check the crankcase oil level as and oil
sensor device is ed to these motors which prevents starng
and stops the motor when the oil level is low.
Motor stops • Check the fuel supply.
Petrol Motor lacks power. • Check the condion of the air lter
Insucient vibraon • Check for a slipping or a missing see belt.
Machine is not moving freely • Check the underside of the plate for a build up of material.

WWW.NIKOLAOUTOOLS.GR
10
EL
ΠΡΟΣΟΧΗ
Για να μειωθεί ο κίνδυνος τραυματισμού, όλοι οι χειριστές και το προσωπικό συντήρησης πρέπει να
διαβάσουν και να κατανοήσουν αυτές τις οδηγίες πριν από τη λειτουργία, την αλλαγή εξαρτημάτων
ή την εκτέλεση συντήρησης στον εξοπλισμό που παράγουμε. Όλες οι πιθανές καταστάσεις δεν
μπορούν να καλυφθούν σε αυτές τις οδηγίες. Πρέπει να δίνεται προσοχή από όλους όσοι
χρησιμοποιούν, συντηρούν ή εργάζονται κοντά σε αυτόν τον εξοπλισμό.
ΠΡΟΣΟΧΗ
ΔΕΝ ΥΠΆΡΧΕΙ ΛΆΔΙ ΣΤΟΝ ΚΙΝΗΤΗΡΆ
Γεμίστε τον κινητήρα με λάδι στη σωστή στάθμη πριν από την εκκίνηση
του κινητήρα.
Τεχνικές Προδιαγραφές
Μοντέλο BTC5105
Ισχύς Κινητήρα 6,5HP (4,1 kW)
Κινητήρας 196cc
Βάθος πρόσκρουσης 20cm
Δύναμη πρόσκρουσης 10,5 kN
Συχνότητα (ipm) 5600 vpm
Συχνότητα δόνησης 93 Hz
Μέγεθος πλάκας 50x36cm
Βάρος 62 Kg
Περιλαμβάνει
Πτυσσόμενη λαβή, τροχός
καροτσιού, ελαστικό
στρώμα
ΠΡΟΔΙΆΓΡΆΦΕΣ
* Ο κατασκευαστής διατηρεί το δικαίωμα να πραγματοποιήσει δευτερεύουσες αλλαγές στο σχεδιασμό του προϊόντος και στα
τεχνικά χαρακτηριστικά χωρίς προηγούμενη ειδοποίηση, εκτός εάν οι αλλαγές αυτές επηρεάζουν σημαντικά την απόδοση και
λειτουργία ασφάλειας των προϊόντων. Τα εξαρτήματα που περιγράφονται / απεικονίζονται στις σελίδες του εγχειριδίου που
κρατάτε στα χέρια σας ενδέχεται να αφορούν και σε άλλα μοντέλα της σειράς προϊόντων του κατασκευαστή, με παρόμοια
χαρακτηριστικά, και ενδέχεται να μην περιλαμβάνονται στο προϊόν που μόλις αποκτήσατε.
* Για να διασφαλιστεί η ασφάλεια και η αξιοπιστία του προϊόντος καθώς και η ισχύς της εγγύησης όλες οι εργασίες
επιδιόρθωσης, ελέγχου, επισκευής ή αντικατάστασης συμπεριλαμβανομένης της συντήρησης και των ειδικών ρυθμίσεων,
πρέπει να εκτελούνται μόνο από τεχνικούς του εξουσιοδοτημένου τμήματος Service του κατασκευαστή.
* Χρησιμοποιείτε πάντα το προϊόν με τον παρεχόμενο εξοπλισμό. Η λειτουργία του προϊόντος με μη-προβλεπόμενο εξοπλισμό
ενδέχεται να προκαλέσει βλάβη ή ακόμα και σοβαρό τραυματισμό ή θάνατο. Ο κατασκευαστής και ο εισαγωγέας ουδεμία
ευθύνη φέρει για τραυματισμούς και βλάβες που προκύπτουν από την χρήση μη προβλεπόμενου εξοπλισμού.
ΕΦΆΡΜΟΓΕΣ
Ο συμπιεστής εδάφους είναι ένα μηχάνημα που συμπιέζει το έδαφος και κάνει την επιφάνεια λεία, μεταδίδοντας δονήσεις μέσω της δονούμενης πλάκας, η
ισχύς της οποίας παράγεται από έναν ενιαίο κινητήρα στην περίπτωση του δονητή. Αυτό το μηχάνημα είναι κατάλληλο για την εξομάλυνση της επιφάνειας
του εδάφους, την ισοπέδωση του εδάφους, την παραλία και την τελική επίστρωση της ασφάλτου.
Εφαρμογές ως εξής:
Συμπύκνωση τάφρων.
Συντήρηση δρόμων Διαμόρφωση τοπίου
Τοιχοποιία με τούβλα Επικαλύψεις οδοστρωμάτων
Εργασίες με χώμα
Διαμόρφωση τοπίου
Επιστρώσεις οδοστρωμάτων
Αυτό το μηχάνημα κινείται δύσκολα σε εδάφη με πολύ νερό (ειδικά σε αργιλώδη εδάφη). Δεν είναι κατάλληλο για τέτοιες εφαρμογές. Αυτό το μηχάνημα
είναι δύσκολο να ισοπεδώσει το έδαφος, συμπεριλαμβανομένων των μεγάλων λίθων, λόγω της ανεπαρκούς δύναμης συμπίεσης. Ο συμπιεστής πλάκας
χρησιμοποιείται κυρίως για την ομαλότερη συμπίεση της επιφάνειας και δεν είναι αποτελεσματικός για εργασίες που απαιτούν βαριά συμπίεση. Σε περίπτωση
συμπύκνωσης του εδάφους βαθιά σε κατώτερο στρώμα, συνιστάται η χρήση του. Ο συμπιεστής συμπίεσης, ο συμπιεστής δόνησης και ο κύλινδρος δόνησης,
που συμπιέζουν με δύναμη, είναι μάλλον αποτελεσματικοί. Χρησιμοποιήστε αυτόν τον συμπιεστή για τη συμπύκνωση επιφανειακού εδάφους, ιζημάτων,
άμμου, παραλίας και ασφάλτου. Δεν συνιστάται η χρήση του για άλλες εφαρμογές.
Προειδοποίηση για εσφαλμένη εφαρμογή και κατάχρηση