Bosch FPA-5000 User guide

Modular Fire Panel
FPA-5000
en System Information

Modular Fire Panel Table of contents | en 3
Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089
Table of contents
1System Information 6
2Product Description 6
2.1 FPA-5000 with Functional Modules 6
2.2 MPC Panel Controller 11
2.3 Remote Keypad 12
2.4 Housings for Frame Installation 13
2.5 Housings for Wall Mounting 16
2.6 System Overview of FPA-5000 with Peripherals 18
2.7 Networking 23
2.8 Connection to BIS 23
2.9 Connecting a Voice Alarm System 24
3Planning 24
3.1 General Information 24
3.2 Structures in Local Security Network 25
3.3 Detection Points 27
3.4 Addressing 27
3.5 Achievable Cable Length with LSN 0300 A 28
3.6 Achievable Cable Length with LSN 1500 A 31
3.7 Examples of Housing Equipment 35
3.8 Configuration of BCM Battery Controller Module 36
3.9 Redundancy 40
4Installation 42
4.1 General Information 42
4.2 Quick Installation Guide 43
4.3 Installation of Housing Components 44
4.3.1 Installation Instructions for Housing 45
4.3.2 Installation Dimensions for Wall Mounting Housing 47
4.3.3 Installation Dimensions for Frame Installation Housing 53
4.3.4 Installation Dimensions for Mounting Frames 56
4.3.5 Installation Kits for 48 cm (19”) Racks 59
4.4 Accessories for Housing 61
4.4.1 RLE 0000 A Junction Board 61
4.4.2 HMP 0003 A Mounting Plate for Mounting Frame 63
4.4.3 FPO-5000-EB Earth Bar 65
4.5 Power Supply Brackets 65
4.5.1 FPO‑5000‑PSB‑CH Power Supply Bracket 67
4.5.2 FPO-5000-PSB1 Power Supply Bracket 71
4.6 UPS 2416 A Universal Power Supply 24 V/6 A 72
4.7 Panel Rails 78
4.7.1 PRS-0002-C Panel Rail Short for 2 Modules 78
4.7.2 PRD 0004 A Panel Rail Long for 4 Modules 80
4.7.3 Panel Rail Installation 81
4.8 MPC Panel Controller 84
4.9 Functional Modules 99
4.9.1 Installation and Removal 100
4.9.2 ANI 0016 A Annunciator Module 101
4.9.3 BCM‑0000‑B Battery Controller Module 101
4.9.4 CZM 0004 A 4 Zone Conventional Module 107

4en | Table of contents Modular Fire Panel
09.2017 | 11.3 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH
4.9.5 ENO 0000 B Fire Service Interface Module 107
4.9.6 FPE‑5000‑UGM Interface Module 109
4.9.7 IOP 0008 A Input/Output Module 110
4.9.8 IOS 0020 A 20 mA Communication Module 111
4.9.9 IOS 0232 A RS232 Communication Module 112
4.9.10 LSN 0300 A LSN improved Module 300 mA 113
4.9.11 LSN 1500 A LSN improved Module 1500 mA 114
4.9.12 NZM 0002 A Notification Appliance Zone Module 116
4.9.13 RMH 0002 A Relay Module for Mains Voltage 117
4.9.14 RML 0008 A Relay Module for Low Voltage 118
4.9.15 Accessories for Functional Modules 119
4.10 Cable Sets 120
4.11 Monitoring auxiliary power according to EN 54-13 121
4.12 FPP‑5000 External Power Supply Unit Kit 24 V/6 A 121
4.13 THP 2020 A Thermal Printer 123
4.14 Remote Keypad 127
5Commissioning 141
5.1 Notes 141
5.2 Documentation 141
5.3 Quick Guide for Commissioning 141
5.4 Functional Test 141
5.4.1 Preparation 141
5.4.2 Testing the Power Supply 142
5.4.3 Testing the Conventional and LSN Functions 142
5.4.4 Testing the Addressing/Activation 142
6Maintenance and Service 143
6.1 Warranty 143
6.2 Repair 143
6.3 Disposal 143
6.4 Additional Documentation 143
7Technical Data 143
7.1 System Limits 143
7.2 Power loss of FPA-5000 Components 145
7.3 Housing and Accessories 146
7.3.1 Housings for Frame Installation 146
7.3.2 Housings for Wall Mounting 146
7.3.3 PRS-0002-C Panel Rail Short for 2 Modules 146
7.3.4 PRS 0002 A Panel Rail Short for 2 Modules (no longer available) 147
7.3.5 PRD 0004 A Panel Rail Long for 4 Modules 147
7.3.6 FPO‑5000‑PSB1/FPO‑5000‑PSB‑CH Power Supply Brackets 148
7.3.7 UPS 2416 A Universal Power Supply 24 V/6 A 148
7.4 Panel Controller and Remote Keypad 148
7.4.1 MPC 148
7.4.2 Remote Keypad 149
7.4.3 FSP-5000-RPS Programming Software 150
7.5 Functional Modules 150
7.5.1 ANI 0016 A Annunciator Module 150
7.5.2 BCM‑0000‑B Battery Controller Module 150
7.5.3 CZM 0004 A 4 Zone Conventional Module 151

Modular Fire Panel Table of contents | en 5
Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089
7.5.4 ENO 0000 B Fire Service Interface Module 152
7.5.5 FPE‑5000‑UGM Interface Module 152
7.5.6 IOP 0008 A Input/Output Module 152
7.5.7 IOS 0020 A 20 mA Communication Module 153
7.5.8 IOS 0232 A RS232 Communication Module 153
7.5.9 LSN 0300 A LSN improved Module 300 mA 153
7.5.10 LSN 1500 A LSN improved Module 1500 mA 154
7.5.11 NZM 0002 A Notification Appliance Zone Module 155
7.5.12 RMH 0002 A Relay Module for mains voltage 155
7.5.13 RML 0008 A Relay Module for Low Voltage 156
7.6 FPP‑5000 External Power Supply Unit Kit 24 V/6 A 156
7.6.1 FPP‑5000 Kit 156
7.6.2 FPP‑5000‑TI Trouble Interface 157
7.6.3 FPP‑5000‑TI13 Communication Interface 157
8Appendix 157
8.1 Options with requirements under EN 54‑2:1997/A1:2006 157
8.2 Component Overview 158
8.2.1 Frame Installation Housings, Mounting Frames and Installation Kits 158
8.2.2 Wall Mounting Housings and Installation Kits 158
8.2.3 Accessories for Housing 159
8.2.4 Panel Rails 159
8.2.5 Power Supply Units, Power Supply Brackets, Batteries 159
8.2.6 Panel Controller/Remote Keypad 160
8.2.7 Functional Modules 162
8.2.8 Cable Sets 162
8.2.9 Thermal Printer 162
8.2.10 CAN/FOC Adapters 163
8.3 Special Applications 164
8.3.1 Controlling Extinguishing Systems 164
Index 165

6en | System Information Modular Fire Panel
09.2017 | 11.3 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH
1 System Information
Safety Instructions
Danger!
The fire panel contains live components.
Touching live components can result in electric shock.
Disconnect the power supply to the fire panel before all maintenance or installation work.
Notice!
The fire panel may only be installed and commissioned by trained specialist personnel.
Notice!
Have maintenance and inspection work carried out regularly by trained, qualified personnel.
Bosch Sicherheitssysteme GmbH recommends a functional and visual inspection at least once
a year.
Notice!
The fire panel is designed for indoor installation.
After installing batteries, the poles must be masked. Appropriate masking strips are included
with the housing in which the batteries are installed.
Use fuses complying with national regulations to protect the power lines.
Notice!
Do not dispose of batteries with domestic waste. Use the collection points provided locally.
See http://www.boschsecurity.com/standards for further information.
Notice!
Consider national and local regulations when installling and operating the fire system.
2 Product Description
With its modular design, the FPA-5000 Fire Panel is easily adapted to local circumstances and
regulations. Due to the different functional modules, country-specific characteristics are
accommodated in the connection just as quickly as the respective alarm protocol.
2.1 FPA-5000 with Functional Modules
The fire panel is available with two different housings:
– Housing for mounting directly on the wall
– Frame installation housings, which are fitted to the mounting frame and can be swiveled.
Special installation kits also allow installation in 482.6mm (19") racks. All housings can be
extended with various additional housings.
The fire panel is configured on a laptop using the FSP-5000-RPS programming software.

Modular Fire Panel Product Description | en 7
Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089
The MPC Panel Controller is the central component of the system. All messages are shown on
the display. The complete system is operated via a touch screen. The user-friendly interface
adapts to the relevant situation. This allows correct operation that is both simple and clear
and targeted and intuitive. The FSP-5000-RPS programming software enables adaptation to
country-specific circumstances.
The panels can be networked with one another and with the remote keypad using the external
CAN bus interface. With a loop or bus structure, this networking is adapted to the conditions
of use (see Networking, page 23).
The FPA-5000 can be connected to the Bosch UGM Universal Security System and thus
integrated into large-scale systems.
Connection to a building management system (Bosch Building Integration System BIS) is
possible via an Ethernet interface using an OPC server (see Connection to BIS, page 23). The
FSM-5000-FSI Software Interface Package allows custom connections to other management
systems.
The FPA-5000 can be connected to a Plena Voice Alarm System. The Praesideo/PAVIRO
systems can be connected using an IP based interface module. See Connecting a Voice Alarm
System, page 24.
The FMR-5000-C Remote Keypad allows decentralized operation of the panel or the panel
network.
Ethernet
BIS
OPC
FPA-5000
FMR-5000
Figure2.1: FPA-5000 Fire Panel (with FMR-5000-C Remote Keypad) in a network
System Overview
The figure below shows an example configuration:

8en | Product Description Modular Fire Panel
09.2017 | 11.3 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH
N
I
TUO
N
I
TUO
#
0
*
8 9
5 6
2 3
7
4
1
?
PQRS TUV WXYZ
GHI JKI MNO
ABC DEF
F i r e
Test
City Tie
City Tie Fa ult
Ground F ault
Battery F ault
Power
Trouble
Signal S ilence
Bypass ed
Superv isory
N A C 1 N A C 3N A C 7N A C
9
N A C 5
N A C 2N A C 4N A C 8N A C
10
N A C 6
PS 2PS 3 PS 5P S
6
PS 4
BC B A T
BC B A T
BA T 2
10 A
25 A
25 A
Bridge 2-3 Bridge 3-4 Bri dge 4- 5 Bridge 5- 6
- - - --+ + + ++
- + - +
-
+
BA T 1 AB AT 1 B
-
+-
+
NETZEIN
NETZSTROM
Störung
BATTERIE1
Störung
BATTERIE2
Störung
FAULT
MAIN
+ - BAT1 + - BAT2 + - BAT1 + - +-
FAULT AC FAULT
AUX3
+ - AUX4 + -
AUX2
+ -
AUX1
+ - AUX5 + - AUX6 + -
BCM0000A
L S N 0 3 0 0 A
AU X 1
+ - L S N 1 a -b +AU X 2 + - L S N 2 a -b +
ZONE4
Störung
ZONE3
Störung
ZONE2
Störung
ZONE1
Störung
CZM0004A
AUX1
+ - OUT1 +- IN1 +- AUX2 + - OUT2 +- IN2 +-
AUX3
+ - OUT3 +- IN3 +- AUX4 + - OUT4 +- IN4 +-
ANI0016A
F2F1
NC1 NO1
C1
NC2 NO2
C2
FB1
+-FB2 + -
RELAIS2
Störung
RELAIS1
Störung
RMH0002A
OUT3 OUT2 OUT4 OUT6 OUT5 OUT7 GND OUT8 GND GND GND
IN1 IN3 IN2 IN4 IN6 IN5 IN7
GND
IN8
GND GND GND
OUT1
IOP0008A
3
4
2
5
1
6
7
9
110
11
8
Figure2.2: Example configuration
Position Description Position Description
1 Functional modules 7 Power supply unit

Modular Fire Panel Product Description | en 9
Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089
Position Description Position Description
2 Address cards 8 Housing (in this case: HCP0006A)
3 Panel controller 9 Panel rail, long
4 Distributor, optional (RLE) 10 Batteries
5 Panel rail, short 11 Remote keypad
6 Power supply bracket
Functions
Due to its modular structure, the FPA‑5000 Modular Fire Panel provides complete flexibility
and thus customized solutions for any application.
The configuration of the components is supported by Planning Software by Bosch for fire
alarm systems. The software provides information about the size and number of housings, the
modules and the energy balance calculation.
Depending on specific requirements, the planning involves choosing from the following
options:
–Housing type (frame and wall mounting)
– Selection of a basic housing
– Extension housing, optional
– Power supply housing, optional
– Installation kits (optional) for installation in 482.6mm (19") racks
–Panel controller
– Selection from a range of language versions
–Panel rail
– Selection according to housing type and/or number of functional modules required
–Power supply
– Batteries
– Power supply units for additional power supply
– Power supply brackets
The power supply brackets on frame installation housings are preinstalled ex works;
for wall-mounted housings, power supply brackets can be selected as required.
–Thermal printer
– THP2020A Thermal Printer
The thermal printer is used to document operating procedures on the panel, as well
as alarm and fault messages (see THP2020A Thermal Printer, page 123). Plain text
can also be printed. Programming is carried out via the programming software
FSP-5000-RPS.
–Additional accessories
– Front doors
– Cable sets for special applications (see Cable Sets, page 120)
–Functional modules
Functional modules are independent, encapsulated units that can be inserted into any
slot on the panel. The power supply and the data traffic with the panel are therefore
provided automatically. The module is identified by the panel with no further settings and
operates in the default operating mode (plug and play).
Wiring to external components is performed using compact connector/screw terminals.
After a replacement, only the connectors need to be reinserted; there is no need for
extensive rewiring.

10 en | Product Description Modular Fire Panel
09.2017 | 11.3 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH
Module Description Function
ANI 0016 A Annunciator Module Indicating system statuses; with 16 red and 16
yellow freely programmable LEDs
BCM-0000-B Battery Controller
Module
Monitoring the power supply to the panel and the
battery charge level
CZM 0004 A 4 Zone Conventional
Module
Connecting existing conventional peripherals using
four monitored conventional lines
ENO 0000 B Fire Service
Interface Module
Connecting fire service equipment complying with
DIN 14675
FPE-5000-UGM Interface Module Connection to UGM systems
IOP 0008 A Input/Output OC
Module
Individual displays or flexible connection of various
electrical devices, with 8 independent digital inputs
and 8 open collector outputs
IOS 0020 A 20mA
Communication
Module
With S20, RS232 and S1 interfaces
IOS 0232 A RS232
Communication
Module
Connection of two devices using two independent
serial interfaces, e.g. a Plena Voice Alarm System,
laptop or printer.
LSN 0300 A LSN improved
Module 300mA
Connection of an LSN loop with up to 254LSN
improved elements or 127LSN classic elements at a
maximum line current of 300mA
LSN 1500 A LSN improved
Module 1500mA
Connection of an LSN loop with up to 254LSN
improved elements at a maximum line current of
1500mA or 127LSN classic elements at a maximum
line current of 300mA
NZM 0002 A Notification
Appliance Zone
Module
Allows connection of two conventional, monitored
notification appliance circuit lines
RMH 0002 A Relay Module Monitored connection of external elements with
feedback, with two changeover contact relays
suitable for switching mains voltage
RML 0008 A Relay Module For low voltage switching, with eight changeover
contact relays
Further information can be found in Functional Modules, page 99.
The technical data can be found in Housing and Accessories, page 146.
Notice!
Planning Software by Bosch can be used to plan fire alarm systems that conform to the
relevant limits (e.g. in terms of cable length and power supply).