Bosch SE352 User manual

Control and Power Electronics
SE352/SE352M control unit

2 Bosch Rexroth AG | Electric Drives and Controls
Control and Power Electronics
SE352/SE352M control unit
Electric Drives and Controls, PDF version, status 2014-03-05, © Bosch Rexroth AG, subject to changes
Documentation
•Instructions
The control unit controls and monitors the tightening process of up to two independent tightening channels per control unit. It also carries out the
system diagnosis and monitors all individual components of a tightening channel. Tightening processes and rework strategies are simply and flexibly
programmed via the BS350 operating system. Automatic recognition of individual components enables fast and secure start-up. Use in multi-channel
tightening systems requires a KE350/KE350G IL communication unit. The SE352M control unit has one free slot. One of the IM24V or IMser interface
modules can be inserted into this slot for communication with superior controllers. On delivery, the SE352M control unit slot is sealed with a cover.
Technical data
Code Order no.
SE352 0608830262
SE352M 0608830263

Local contact information can be found at:
www.boschrexroth.com/adressen
Bosch Rexroth AG
Postfach 13 57
97803 Lohr, Germany
Bgm.-Dr.-Nebel-Str. 2
97816 Lohr, Germany
Tel. [phone]
Fax [phone]
www.boschrexroth.com/electrics
© Bosch Rexroth AG 2012
Subject to modification.
Printed in Germany
The data specified above only serve to describe the product.
As our products are constantly being further developed, no
statements concerning a certain condition or suitability for a certain
application can be derived from our information. The information
given does not release the user from the obligation of own judgment
and verification.
It must be remembered that our products are subject to a natural
process of wear and aging.