Braun ActivScan 9 User manual

ActivScan™9
BUA 7200

H
B
A
D
C
I
E
J
G
F
1
www.hot-europe.com
This product is manufactured under a licence to the
‘Braun’trademark. ‘Braun’ is a registered trademark of
Braun GmbH, Kronberg , Germany.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc., and any
use of such marks is under licence.
App Store is a service mark of Apple Inc., registered
in the U.S. and other countries.
Google Play and the Google Play logo are
trademarks of Google Inc.
Kaz Europe Sàrl
Place Chauderon 18
CH-1003 Lausanne
Switzerland
Printed in China
© 2017, All rights reserved
BUA7200CEME P/N A000495R0 16AUG17
Braun ActivScan™9
BUA7200
Upper arm blood pressure monitor
Product description
English...........................2
Dansk..........................14
Suomi..........................26
Norsk...........................38
Polski...........................50
......................62
..............74
Svenska ......................86
Türkçe .........................98
GB
DK
FI
NO
PL
RU
SA
SE
TR

2
Intended use of the Braun ActivScan™9
ActivScan™9 is a blood pressure monitor that has been developed for accurate, comfortable and
intuitive blood pressure measurements from the upper arm.
What you should know about blood pressure
Blood pressure constantly changes throughout the day. It rises sharply in the early morning and
declines during the late morning. Blood pressure rises again in the afternoon and finally drops
to a low level at night. It may also vary over a short period of time. Therefore readings from
successive measurements may fluctuate.
This device will display your blood pressure reading referring to two values: systolic and diastolic.
The systolic blood pressure (the upper number) indicates how much pressure your blood is
exerting against your artery walls when the heart beats. The diastolic blood pressure (the lower
number) indicates how much pressure your blood is exerting against your artery walls while the
heart is resting between beats. The pulse value is also displayed after each measurement.
The ESH (European Society of Hypertension) and WHO (World Health Organisation) have set up
the following standard blood pressure values when measured with a resting pulse at home:
Blood pressure
(mmHg) Too
low Normal values
Grade 1
mild
hypertension
Grade 2
moderate
hypertension
Grade 3
severe
hypertension
SYS = systole
(upper value) below 100 up to 134 135-159 160-179 ≥180
DIA = diastole
(lower value) below 60 up to 84 85-99 100-109 ≥110
For every measurement displayed
on the screen, the associated colour
(from green to red) will indicate the
corresponding blood pressure level.
You can use this classification daily
to help you understand your blood
pressure. If you are really concerned
by the classification, you should
consult your doctor.
The guidance levels set by the
World Health Organisation are also
available directly on the ActivScan™ 9
blood pressure monitor. If you wish
to consult the colour-coded chart on
your device, select the Information tab .
Safety information and important precautions
To ensure accurate measuring results, read the complete instructions for use carefully.
People suffering from cardiac arrhythmia, vascular constriction, arteriosclerosis in the extremities,
diabetes or users of cardiac pacemakers should consult their doctor before measuring their blood
pressure themselves. Deviations in blood pressure values may occur in such cases.
180+ 110+
160-179 100-109
135-159 85-99
< 85
< 135 and
or
or
or
SYS (mmHg) DIA (mmHg)
Green >
Yellow >
Orange >
Red >

3
English
If you are under medical treatment or taking any medication, please consult your doctor first.
The use of this blood pressure monitor is not intended as a substitute for a consultation with your
doctor.
Key rules for accurate blood pressure measurement
Always take readings at the same time of day, under the same conditions.
Do not take a measurement within 30 minutes of smoking, drinking coffee or tea or any form of
exertion. These factors will influence the measurement.
Always measure on the same arm. The left arm is recommended.
Place the cuff in direct contact with the skin. Do not wrap the cuff over a jacket, sweater or shirt.
If you want to take multiple measurements, wait approximately 3 minutes before repeating a
measurement.
Product description (see Page 1)
AHome button (touch-sensitive)
BNavigation dial
CEnter button (centre of navigation dial)
DHeart measurement button (touch-sensitive)
EBattery compartment cover
FAir hose
GConnector
HDisplay
IOn/Off button
JCuff
Inserting/replacing batteries
• Remove the battery compartment cover by sliding it horizontally to the
left. Insert the four batteries supplied with this product, with polarity
as indicated in the battery compartment. When replacing batteries, use
alkaline batteries exclusively, type AA/LR6, 1.5V.
• New batteries will provide approximately 350 measurements.
• When replacing batteries, all readings saved in memory are preserved
but date and time must be set again.
The basics
On/Off button: located at the top of the device.
Home button: When home is available this icon will be lit. Simply touch or tap this button takes you back
to the home screen menu.
Navigation dial: turn this control to the left or right to go through the different functions of your device
and press in the centre (Enter button) to select or confirm a choice.
Heart measurement button: When lit, touch or tap this button will start a measurement.

4
Menu icons
Take a measurement Select this function and press enter to take a measurement. This function is the
same as the Heart measurement button (D)
History Select this function to view the history and the trend of your blood pressure
readings in a coloured chart
Calendar View Select this function to view your blood pressure readings in a month by month
calendar view with coloured daily averages
Reports Select this function to see your 7/14/30 day blood pressure averages
Users Select this function to select, add, edit or delete a user
Date and time setting Select this function to set the date and time on your device
Settings Select this function to enable/disable the guided animations when taking a
reading or enable/disable the user selection when turning on
Bluetooth® pairing Select this function to pair your device with the Braun Healthy Heart app
Information Select this function to obtain more information about the blood pressure colour
chart and how to take a blood pressure reading correctly
Setting the date and time
The date and time need to be set before a
measurement can be taken.
It is important to set the date and time
correctly to ensure that the readings are
displayed correctly on this device and in the
Braun Healthy Heart app.
This screen will be shown automatically when
the device is first used or after inserting a new
set of batteries.
If you need to adjust the date and time at a
later date (for example when advancing the
clock by one hour in the summer), then you
can access this screen from the main menu by
selecting the date and time icon .
Choose the format (EU or US), then the date and time by turning the navigation dial. Press the
Enter button to activate the field. When the field flashes you can adjust the numbers. Press the
Enter button to confirm the number entered and the cursor will jump to next field. Repeat the
process. When completed, confirm by selecting the 'Save' icon .

5
Setting a user name
From the main menu select User and press
Enter. Now select the letters by turning the
navigation dial, and confirm each letter by
pressing the Enter button. When complete,
select the Save icon and press Enter.
Names can be changed at any time by
choosing the User icon from the main
menu.
The user name will not be lost if the batteries
are removed or replaced.
Correct posture and cuff positioning
Correct posture during measurement is
important to obtain accurate readings. For
greater accuracy, we recommend using the
left arm because it's closer to your heart.
The correct position of the cuff should be 2-3 cm
above the elbow, with tube outlet facing in the
direction of your hand and running along the
centre of the inside of your elbow, close the
cuff with Velcro fasterner so it fits tightly but
comfortable on your arm. There should not be
a space between the cuff and your arm.
The ActivScan™ 9 provides on-screen
animations to help you achieve the correct
posture and fit the cuff properly. This assisted
reading function will be displayed automatically when the device is first used and then can be
displayed optionally before each reading by selecting the Settings icon .
The on-screen animation guide can also be viewed at any time by choosing the Information icon
from the main menu.
Taking a blood pressure reading
1. Sit down, relax, keep still (especially the arm being used for the measurement), do not move
or speak.
2. Fit the cuff 2-3 cm above the elbow, with tube outlet facing in the direction of your hand and
running along the centre of the inside of your elbow.
3. Touch the heart measurement icon located to the left of the dial to start a measurement
or select the heart button in the main menu. The measurement starts after 3 seconds of
on-screen countdown animation. It is possible to cancel the measurement at any time by
touching the Home button or the Enter button.
3
English

6
Understanding your reading
When a measurement is complete, the
readings are displayed on the screen along
with a coloured heart logo. The heart logo and
the background colour will indicate the level
of hypertension for the reading. Please refer
to the WHO colour-coded chart (on Page 2) to
understand this interpretation.
SYS: shows the reading for the systolic blood
pressure
DIA: shows the reading for the diastolic blood
pressure
Shows the pulse (heart rate)
This icon appears if there is an irregular
heartbeat. An irregular heartbeat can be
caused by simply talking, moving or shaking during a measurement.
Normally this is not cause for concern. However if the symbol appears frequently, and these
guidelines are strictly followed, you should seek medical advice.
Memory function
Your ActivScan™9 stores up to 200 readings for each user. Readings are stored automatically
when the measurement is complete. When the 200 readings are reached, the new readings
automatically replace the oldest ones. We suggest you regularly transfer your stored readings
onto the Braun Healthy Heart app on your Smartphone in order to follow the evolution of your
blood pressure easily over a long period of time.
The memory is non-volatile. Stored readings will not be lost when batteries are replaced.
Consult the average of your readings
Access the averages of your readings as a
report by selecting the Report icon in the
menu. This function gives the averages for the
last 7, 14 or 30 days from the readings taken
for the morning (left), evening (middle) and
the whole day (right).
The total number of readings taken during the
time period is displayed at the bottom and is
shown as .
Consulting the average of your readings will
give you a blood pressure value which is more
representative of your overall cardiovascular
health.
Make sure you regularly take your blood
pressure so the average numbers will more
accuratly show your overall cardiovascular health.
Refers to measurements taken in the morning, between 04:00 and 09:59
Refers to measurements taken in the evening between 19:00 and 01:59 (on the next day)
24h
Refers to all measurements taken during the day, between 00:00 to 23:59
EMMA
mmHg
70
80
mmHg
120 SYS
DIA
4:56 PM
03-25-2016
18-12-2016 — 25-12-2016
75
140
90
SYS
DIA
7 14 30 14
mmHg
mmHg
mmHg
80
160
100
SYS
DIA
mmHg
mmHg
mmHg
70
120
80
SYS
DIA
mmHg
mmHg
mmHg
24h

7
Tracking the evolution of your blood pressure
Selecting the History icon in the menu will
give you access to an overview of your blood
pressure data in the form of a bar chart.
Each coloured bar represents a single
reading. Select a coloured bar by moving
the blue highlight box with the navigation
dial. The details of the selected reading will
be displayed at the bottom of the bar chart.
Each bar colour follows the WHO guidelines as
shown on Page 2.
This icon indicates the pulse reading.
This icon appears if an irregular heartbeat
has been detected for this selected
reading.
The irregular heartbeat will also be shown on the bar chart for the corresponding reading with an
interrupted coloured bar .
Deleting a reading
It is possible to selectively delete a reading
from the history view. That reading will also
be deleted from all other views and will not be
transfered at next connection with your Braun
Healthy Heart App.
Select one reading in the bar chart, and then
press on the Enter button: this will show a
screen with the details of the reading and
a small icon at the bottom for deleting that
reading.
To delete the reading, select the dustbin
symbol then press on Enter button. To
abort, select the back symbol and press on
Enter button.
EMMA
EMMA
mmHg
70
80
mmHg
120
SYS
DIA
16:56
03-25-2016
English

8
Calendar view
Selecting the Calendar icon in the menu
will show your daily average month by month.
Month and year are shown at the top of the
screen.
The week starts with Monday to the left;
Saturday and Sunday are to the right of the
grey line.
Days with readings are highlighted in the
colour of the daily average (refer to the WHO
chart on Page 2) and details of a particular
day's average reading are shown on the right
hand side.
Navigate through the days of the month using
the navigation dial. You can quickly navigate through the months by going to the first (last) day of
the month, and then you will jump to the previous (next) month and so on.
On top of the screen, the small heart icon followed by a number refers to the number of
readings that were taken on the selected day.
You can see all measurements for a selected day by clicking on the Enter button. The small heart
icon at the top will indicate the measurement numbers
1/2
. Clicking on the Enter button
will move to the next measurement.
Bluetooth pairing
ActivScan™ 9 is comptabile with the Braun
Healthy Heart app.
Make sure the Braun Healthy Heart app has
been downloaded onto your Smartphone
and your app is open.
To pair your device with the Braun Healthy
Heart app on your Smartphone, select the
Bluetooth icon in the menu of your
ActivScan™ 9.
Switch on the Bluetooth function on your
phone. At first time use of the Braun Healthy
Heart app, follow the on-screen instructions
to pair your device. Both app and device will
show that the connection is in progress.
When your ActivScan™ 9 is successfully paired,
the screen will display a green tick mark .
If you want to pair another device with your
smartphone, go to the‘Connect device’section
of the app and follow the instructions.
03-13-16
EMMA
mmHg
75
90DIA
mmHg
140SYS
16:56
2
EMMA
EMMA