Bristan Quadrant Riser Rail kit User manual

AFTERCARE
INSTRUCTIONS
Your fitting has a high quality finish and should be treated with care to
preserve the visible surfaces.
All surface finishes will wear if not cleaned correctly, the only safe way to
clean your fitting is to wipe with a soft damp cloth. Stains can be
removed using washing up liquid. All bath cleaning powders and liquids
will damage the surface of your fitting even the non-scratch cleaners.
GUARANTEE
All products are manufactured to the highest standards and a 5 year
guarantee covers any defect in manufacture.
As gold and special effect finishes are softer than chromium plate,
special care must be taken when cleaning, a 3 year guarantee covers
these finishes.
NOTE: - the 5 year guarantee is invalidated if damaged by any
waterborne debris.
PRODUCT CODE: KIT1 C / ST
TELEPHONE HELP LINE! [phone]
Bristan Limited
Birch Coppice Business Park
Dordon
Tamworth
Staffordshire
B78 1SG
UK
Web site: www.bristan.com
Telephone: [phone]
Facsimile: [phone]
Email: [email protected]
(FI KIT1 30/04/02 MZ)
Quadrant Riser Rail Kit
Fitting
Instructions
Before starting any installation project, consider
“safety” first. Look for the “safety note” sign and
read the safety advice.
Please keep these instructions for future reference
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

3
5
550 mm
6
4
1
2
33 mm
CONTENT
•Slider rail (x1)
•Slider (x1)
•Wall bracket assemblies (x2)
•Wall fixing kit (x2)
•Hose (x1)
•Handset (x1)
INSTALLATION
1. Identify all components and check for completeness, particularly
before arranging installation.
2. Pulling out the wall bracket securing plugs (1) from ends of riser tube
(3) and removing the wall bracket assemblies (2) will reveal the wall-
fixing holes.
3. Use the riser tube (3) loosely assembled with the wall brackets as a
template to establish the position for the slider rail and mark out the
fixing holes or use the diagram as a guide.
Prior to drilling into walls, check there are no hidden
electrical wires, cables or water supply pipes with
the aid of an electronic detector. If you use power
tools do not forget:
•Wear eye protection
•Unplug equipment after use
4. Drill holes to suit, and insert rawl plugs if required.
5. Screw wall brackets to wall using supplied fixing kit. Make sure the
holes in the wall bracket assemblies are horizontal, then position riser
tube onto brackets and secure with plugs (2).
6. Please ensure that the hose (5) will connect to your valve in the
extreme position with the handset (6) fitted in position, using small
sealing washers.
7. See over the page for aftercare instructions.
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk