Britax B-CLEVER User manual

B-CLEVERTM Stroller
User Guide
Guide de l’utilisateur
Guía del usuario

1
B-CLEVERTM and BRITAX®are trademarks owned by Britax Child Safety, Inc. All
rights reserved. ©2019 Britax Child Safety, Inc. This product and its components are
subject to change without notice. P11880400_A:06.19
Contents
Safety Information���������������������������������������������������������������2
Features��������������������������������������������������������������������������������4
In The Box ����������������������������������������������������������������������������5
Assembly������������������������������������������������������������������������������6
Stroller Frame..................................................................................... 6
Front Wheel........................................................................................ 6
Rear Wheels....................................................................................... 7
Canopy............................................................................................... 8
Cup holder ......................................................................................... 9
Operation ����������������������������������������������������������������������10
Using the Stroller ............................................................................. 10
Adjusting the Seat............................................................................ 11
Using the Parking Brake .................................................................. 12
Using the Front Wheel Swivel Lock ................................................. 12
Using the Harness ........................................................................... 12
Securing Your Child �����������������������������������������������������14
Infant Car Seat Mode ��������������������������������������������������������15
Using the Infant Car Seat Receivers................................................ 15
Using a Britax Infant Car Seat ......................................................... 17
Care and Maintenance������������������������������������������������������18
Warranty �����������������������������������������������������������������������������19

2
Safety Information
Failure to follow all warnings and instructions
could result in SERIOUS INJURY or DEATH.
Read these instructions carefully before using this product�
To ensure proper use, store this user guide in a convenient
place so it can be consulted often�
• Never leave child unattended.
• Do not use stroller with a child taller than 44 inches (111.8 cm).
• Do not use stroller with a child who weighs more than 50 lbs
(22.6 kg). Exceeding this limit may cause stroller to become
unstable.
• Avoid serious injury from falling or sliding out. Always use
harness to secure child.
• Avoid finger entrapment or injury. Always ensure any child
occupants or bystanders are away from the stroller while
folding or unfolding.
• Stroller appropriate from birth, however, Britax recommends
use only with an infant car seat until child has head and neck
control.
• Do not overload basket – Maximum weight in basket is 10
lbs (4.5 kg). Overloading the basket may cause the stroller to
become unstable and tip over.
• Do not overload the hood storage pocket - Maximum weight
in storage pockets is 1 lb (0.45 kg) per pocket. Overloading the
storage pocket may cause the stroller to become unstable and
tip over.
• DO NOT overload cup holder. Maximum weight -16 ounces
(0.5 kg).

3
• Do not attach parcels, bags, or other items to the handlebar
or frame of stroller except those recommended by Britax, as
stroller can become unstable and tip over.
• Always make certain that the stroller is fully open and locked
before use.
• Assembly of this stroller must be performed only by an adult.
• Only use Britax approved car seats, accessories and
replacement parts with this stroller.
• Do not allow children to climb on or play with the stroller.
• Do not use the stroller on stairs, escalators, moving vehicles, or
steep inclines. Stroller can tip over.
• Stroller is intended for walking speed only. Do not use while
jogging, skating, or any activity other than walking.
• Always set the parking brake when stroller is not moving. Never
load or unload the stroller without the parking brake set.
• Do not park on inclines. The parking brake is intended to park
the stroller on flat surfaces only. Parking on inclines may result
in tip over or runaway stroller.
• Do not exceed the manufacturer’s maximum weight limit
when using an infant car seat with this product. See infant
car seat user guide for maximum occupant weight and other
instructions.
• All infant car seats MUST be installed rear facing.
• Do not modify the stroller or any labels. Doing so voids the
warranty and could lead to a dangerous condition.
• Failure to regularly inspect this product and its components to
make sure they are in good condition and good working order
can result in injury. Discontinue use of stroller if damaged or
any parts are missing.

4
Actual product may vary from images.
Features
Canopy
Handle
Chassis
Lock
Harness
& Buckle
Front Wheels
Rear Wheel
Release
Button
Frame
Release
Button
Frame
Release
Strap
Under-
Seat
Storage
Basket
Swivel
Lock
Rear
Wheel

5
Actual product may vary from images.
In The Box
B-Clever Stroller
Canopy
Infant Car Seat Receivers
Cup Holder
(in select models)
Front Wheels
Rear Wheels

6
Assembly
Stroller Frame
1. Push the release on the chassis lock
and open the frame.
2. Lift handle until frame locks into upright
position.
NOTE: After stroller is upright, push
down on handle to make sure frame is
locked in open position.
Front Wheels
Installing the Front Wheels
1. Slide the front wheel assembly
onto the mounting post at the
front of the stroller.
2. Pull wheel to ensure that it is secure.

7
Removing the Front Wheels
1. Pull the release lever at the back of the
mounting post and pull the wheel away
from the stroller.
Rear Wheels
Installing the Real Wheels
1. Slide the rear wheel axle into the rear
wheel hub mounting bracket until it
locks into place.
2. Pull wheel to ensure that it is secure.
Removing the Rear Wheels
1. Pull and hold the release lever
at the bottom of the rear wheel hub
while pulling the rear wheel away
from the stroller.

8
Canopy
1. Slide the canopy stay brackets into the
stroller frame mounts until they lock
into place.
2. Attach the hook and loop fasteners on
the hood of the stroller.
3. Attach the hook and loop fasteners
around the outer edge of the canopy
and hood to the stroller.

9
Cupholder (in select models only)
1. To install, push cup holder bracket onto
the holding pin located on the side of
the stroller handle. A click will confirm it
is secure.
2. To remove, pull out the cup holder off
the holding pin. You will hear a click.

10
Operation
Using the Stroller
Folding the Stroller
IMPORTANT: Always apply brake and
remove children before folding the stroller.
1. Press the frame release button once.
NOTE: Not necessary to continue to
hold the button.
2. Locate the frame release strap under
the seat cover in the middle of the seat.
3. Pull the strap until the stroller collapses
and locks. Check to make sure the
chassis lock is secure.
IMPORTANT:
• Before and during use, always make sure the child’s hands and feet are away
from wheels.
• Protect stroller when transporting and shipping to prevent damage to stroller and
stroller components. Check closely for damage after transporting and shipping.

11
Unfolding the Stroller
1. Push the release on the chassis lock
and open the frame.
2. Lift the handle until frame locks into
upright position.
NOTE: After stroller is upright, push
down on handle to make sure frame is
locked in open position.
Adjusting the Seat
1. To recline, pull the recline adjuster
release lever and slide it away from
the seat.
2. To raise, pull both straps apart.
CLICK

12
Using the Parking Brake
1. Press the brake pedal down to
lock the brake.
NOTE: Pressing the brake locks both
back wheels.
2. Lift the brake pedal to release
the brake.
Using the Front Wheel Swivel Lock
1. Press the swivel lock lever down
to lock the front wheel.
2. Lift the swivel lock lever to allow the
wheel to swivel.
Using the Harness
IMPORTANT: Shoulder and waist straps separate for care and
maintenance, but should always be used together to secure
your child.
1. Align the tongues on the waist straps
with the retainers of the shoulder
straps and slide through until they lock
into place.
2. Insert the tongues into the buckle
assembly until a click is heard.
CLICK
CLICK
CLICK

13
Adjusting the Harness
IMPORTANT: The harness can be adjusted to three dierent heights.
Always ensure proper adjustment at or above your child’s shoulders.
1. Pull the harness strap retainer
away from the seat back and turn
90 degrees to feed it through the
harness slot.
2. Push the harness retainer through the
appropriate harness slot to the back
of the seat.Turn the harness retainer
to its original position as shown so it
properly retains the harness.
3. Turn the harness retainer to its original
position as shown so it properly retains
the harness.

14
Securing Your Child
1. Release the harness by depressing the
button in the center of the buckle while
pulling the two tongues away from the
buckle assembly.
2. Fasten the harness by inserting the
tongues on the harness straps into the
buckle assembly.
3. Tighten or loosen the harness straps by
sliding the harness adjusters.

15
Infant Car Seat Mode
• All infant car seats MUST be installed rear facing.
• Always remove the infant car seat receivers when not in use.
Failure to do so may result in injury.
IMPORTANT:
• For infant car seats compatibility refer to us.britax.com/faqs/.
• Always secure child in harness when infant car seat is in use with
the stroller.
Using the Infant Car Seat Receivers
Attaching the Infant Car Seat Receivers
NOTE: Attach the adapters as shown in the image.
1. Lock the parking brake.
2. Align the receiver with the mount on
the inside frame of the stroller, then
push down until a click is heard.
Pull up on the receiver to ensure it is
secure.
3. Repeat for the other side.
CLICK

16
CLICK
Removing the Infant Car Seat Receivers
1. Press the button on the receiver
and slide upward.
2. Repeat for the other side.

17
Using a Britax Infant Car Seat
Attaching a Britax Infant Car Seat
1. Set the parking brake.
2. Line up the adapter on the infant car
seat with the receivers on the stroller.
3. Press down until locked into place.
4. Lift up on both sides of the infant car
seat to ensure that it is secure.
Removing a Britax Infant Car Seat
Refer to your infant car seat user guide for information on the removal
instructions for your specific model.

18
IMPORTANT: Before each use, check the stroller and its
components to make sure they are in good condition and good
working order.
Parking Brake • Periodically check that the parking brake works
properly and locks both wheels securely.
• Clean out any dirt or debris that may prevent the
brake from working.
Frame • Wipe the frame with a damp cloth and mild
soap. Use clean, dry cloth or towel to wipe
away excess water and soap.
Fabric and
Harness
• Do not machine wash or dry the cover.
• Hand wash with cold water and mild soap. Air
dry to prevent shrinking.
• Do not iron.
Plastic Parts • Wipe with a damp cloth and mild soap. Use a
clean, dry cloth or towel to wipe away excess
water and soap.
• Do not use abrasives, solvents, strong
detergents, or household cleaners. These
products can scratch, discolor, and weaken
plastic or cause corrosion on metal surfaces.
Maintenance • If the stroller gets wet, wipe with a clean cloth
or towel to prevent corrosion.
• Do not fold the stroller when wet or damp.
Always make sure that the stroller is dry
before storing.
Storage • To prevent damage to plastic parts, store away
from extreme heat.
• Cover the stroller to prevent dust build-up and
exposure to sunlight.
• Do not stack other items on top of the stroller.
Care and Maintenance