Britax Steelcraft one 2 User manual

Lightweight Tandem Travel System
Suitable for use with Britax Safe-n-Sound Unity Baby Capsules
and the One 2V2 Second Seat.
(All products are sold separately)
0 - 20kg
(newborn - 4 years approx.)
IMPORTANT KEEP THIS BOOKLET IN A SAFE
PLACE FOR FUTURE REFERENCE
SERIES TK321-T | britax.com.au

02 |
Contents
Stroller Section
Stroller Warnings and Important Notes 04
Lift & Carry Correctly 06
What’s in the Box: Parts 07
What’s in the Box: Accessories 08
Optional Accessories & Compatibility 08
Stroller Features 09
Stroller Congurations: Single 11
Stroller Congurations: Double 12
Stroller Assembly
Opening the Stroller Frame 13
Attaching or Removing the Rear Wheels 14
Attaching or Removing the Front Wheels 14
Attaching the Stroller Seat 15
Attaching the Canopy 16
Attaching the Arm Bar 17
Attaching the Shoulder Harness Pads 18
Attaching the Boot Cover 18
Installing the Newborn Comfort Insert 19
Attaching the Cup / Bottle holder 21
Installing the Sun Shade 21
Installing the Rain Cover 22
Stroller Operation
Using the Brakes 23
Using the Front Swivel Lock 23
Adjusting the Backrest 24
Adjusting the Leg Rest 25
Adjusting the Pivotal Handle 25
Securing Your Child Harness 26
Adjusting the Harness 27
Opening the Harness 27
Adjusting the Shoulder Harness Height 28
Using the Storage Basket 28
Using the Tether Strap 29
Removing & Reversing the Stroller Seat 30
Bassinet
Converting Stroller to Bassinet 31
Fitting the Bassinet Liner 32

ONE 2V2 | 03
Stroller Operation
Using the Stroller 33
Folding the Stroller 34
Lifting and Carrying the Stroller 35
Second Seat
Second Seat Warnings & Important Notes 36
Attaching the Wheel Guards 37
Attaching & Removing the Seat Extension Adaptors 37
Attaching the Second Seat to the Stroller Frame 38
Removing the Second Seat from the Stroller Frame 39
Baby Capsule
Baby Capsule Warnings & Important Notes 40
Installing & Removing the Click & Go™Adaptors 41
Attaching the Britax Unity Baby Capsule 42
Removing the Britax Unity Baby Capsule 43
Attaching & Removing Britax B-Safe 35 (for NZ market) 44
Care & Maintenance 45
Warranty 48
Notes 51

04 |
WARNINGS TO AVOID INJURY OR DEATH:
ALWAYS APPLY THE BRAKES WHENEVER THE PRAM/STROLLER IS STATIONARY.
• DO NOT LEAVE CHILDREN
UNATTENDED.
• SECURE THE CHILD IN THE
HARNESS AT ALL TIMES.
• DO NOT CARRY EXTRA CHILDREN OR
BAGS ON THIS PRAM/STROLLER.
• MAKE SURE CHILDREN ARE CLEAR
OF ANY MOVING PARTS IF YOU
ADJUST THE PRAM/STROLLER.
• DO NOT USE ANY ACCESSORIES
OTHER THAN THOSE APPROVED
FOR USE WITH THIS PRAM/
STROLLER BY BRITAX.
• IT IS UNSAFE TO USE ACCESSORIES
NOT APPROVED FOR USE WITH THIS
PRAM/STROLLER.
• THE MAXIMUM WEIGHT OF THE
CHILD IS NOT TO EXCEED:
PRAM/STROLLER: 20KG
MOTHER FACING BABY MODE: 15KG
BRITAX UNITY BABY CAPSULE: 12KG*
BRITAX B SAFE 35 CAR SEAT: 15.8KG*
MAXI COSI MICO AP: 9KG*
NUNA KLIK PLUS: 11KG*
SECOND SEAT: 15KG*
(* SOLD SEPARATELY)
FOR IMPORTANT NOTES AND
WARNINGS ON ACCESSORIES
-REFER TO THEIR INDIVIDUAL
SECTIONS IN THIS BOOK OR
THE INSTRUCTION MANUAL
INCLUDED WITH THE INDIVIDUAL
PRODUCTS. THE MAXIMUM
WEIGHT VARIES FOR EACH
ACCESSORY.
Always follow the manufacturer’s instructions. Read all instructions
carefully before assembly and use of this pram/stroller.
The correct use and maintenance of this product is essential.

ONE 2V2 | 05
This CAUTION symbol is
shown at certain steps in
this instruction manual to
highlight the danger of being
injured by moving parts.
IMPORTANT NOTES:
• Use great care when using the stroller on stairs,
escalators, travelators or other moving surfaces.
• It is recommended to remove the child from
the stroller before going up or down stairs or
escalators.
• Do not lift the stroller by the arm bar (supplied)
because it may disengage.
• Do not allow children to stand on the seat.
• Do not hang bags unless they are supplied or
goods from the handle as this could cause the
stroller to tip over.
• Do not leave the stroller and its accessories near
an open re or exposed ame.
• Do not place more than 12kg in the basket at
single mode or 4kg at tandem mode, 1kg in the
cup/bottle holder or 1.5kg in the organiser bag if
supplied or purchased.

06 |
Lift & Carry Correctly
The SMART lifting technique: This technique can be
used to pick up small light loads from low levels.
Size up the load
• Assess the load (size, shape, and weight).
• Assess whether the load needs to be moved;
• Where is it going to be placed” Check that there are no
obstructions;
• Assess whether mechanical or human assistance is required.
Move the load as close to the body as possible
• A load is heavier to lift or carry if it is not close to the body.
• The whole hand should be used to ensure a rm grip.
Always bend your knees
• Maintain balance.
• Keep feet apart and in a comfortable position.
• Minimise lower back bending.
• Bend knees preferable at as large an angle as possible
but not at a right angle - use a semi-squat in preference
to a full squat.
Raise the load with your legs
• Achieve the lift smoothly and without jerkiness.
• Maintain the normal curvature of the spine to allow the
force of the load to be distributed evenly from the spine
to the pelvis.
Turn your feet in the direction that you want to
move the load.
• Avoid unnecessary bending, twisting, and reaching.
• Change direction by turning your feet and not your back.
• To set the load down, squat down, keep your head up and
let your legs do the work.
Remember to THINK TALL - chest lifted, shoulders
relaxed, chin tucked in, and head level.

ONE 2V2 | 07
What’s in the Box: Parts
1 x Stroller Seat 1 x Canopy
1 x Arm Bar
1 x Stroller Frame & Basket
2 x Front Wheels 2 x Rear Wheels

08 |
Optional Accessories
• Click & Go™Baby Capsule Adaptors for
Maxi Cosi Mico and Nuna Klik Plus
• Click & Go™Adaptors for One 2
• Steelcraft Cup Holder
• Steelcraft Rain Cover
• Steelcraft Shade Cover
• Newborn & Toddler Comfort Pack
Compatible with:
• Click & Go Signature Bassinet (with Click & Go™ Adaptors)
• One 2 Second Seat (with Extension Adaptors)
• Britax Safe-n-Sound Unity Neos Baby Capsule
(with Click & Go™ Adaptors)
• Britax Safe-n-Sound Unity Baby Capsule Isox Compatible
(with Click & Go™ Adaptors)
• Britax B-Safe 35 (for NZ market) (with Click & Go™ Adaptors)
• Maxi Cosi Mico Baby Capsule* (with Click & Go™ Baby capsule
adaptors for Maxi Cosi Mico & Nuna Klik plus)
• Nuna Klik Plus Baby Capsule* (with Click & Go™ Baby capsule
adaptors for Maxi Cosi Mico & Nuna Klik plus)
* refer to Maxi Cosi Adaptor Instruction manual for
attaching and removing baby capsule.
1 x Bassinet Liner
What’s in the Box: Accessories

ONE 2V2 | 09
Stroller Features
UPF50+ canopy
Leg rest adjuster button
Arm bar
Viewing window
Pivotal handle
Seat release button
Frame socket
Frame lock latch

10 |
Tether strap
Folding lever
Second seat bracket
Basket
Brake
Cup / bottle holder
(sold separately)
Viewing window
Backrest recline lever
Stroller Features

ONE 2V2 | 11
Stroller Congurations: Single
PLEASE NOTE: Shown with optional accessories (sold separately).
DO NOT exceed maximum weight limits dened in the Baby Capsules or Accessory instruction manuals.

12 |
Stroller Congurations: Tandem
PLEASE NOTE: Shown with optional accessories (sold separately).
DO NOT exceed maximum weight limits dened in the
Baby Capsules or Accessory instruction manuals.
It is recommended to use the extension adaptors (supplied with
the Second Seat). Do not use the positions shown here if there
is not enough space for the lower child.
Lower position not suitable for Britax B-Safe 35, Maxi Cosi Mico & Nuna Klik Plus

ONE 2V2 | 13
Stroller Assembly
Opening the Stroller Frame
AOpen the frame
lock latches inside
the frame. The lower
part of the stroller
will be open.
BLift the handle
upwards until the
frame is fully open
and locked.
IMPORTANT NOTES:
PLEASE REFER TO PAGE 6 FOR
SMART LIFTING TECHNIQUES.
• Release the storage latch with due care and
open the frame.
• When opening the stroller, be aware of the
danger of being injured by moving parts and
locking devices during the process. Keep all
hands and limbs clear of these parts.
• There is potential for ngers or parts of the
body to injured when the stroller is being
unfolded, due care should be exercised.
• Keep children clear of the stroller when
unfolding the stroller.
• Open the stroller slowly and be careful where
you place your hands. Keeping your hands on
the handle is the best way to unfold the stroller.
B
A

14 |
Stroller Assembly
Attaching or Removing the Rear Wheels Attaching or Removing the Front Wheels
AInsert wheel axle
into the moulding and
push in until you hear
a ‘click’. Pull on each
wheel to make sure it
is securely attached.
Repeat the process if
not locked in.
AInsert each
front swivel wheel
assembly into the
wheel moulding and
push in until you hear
a ‘click’. Pull on each
wheel to make sure it
is securely attached.
Repeat the process if
not locked in.
BTo remove the
rear wheels, press
and hold the release
button in the wheel
housing and pull
away.
BTo remove the front
wheels, push the
release button on
wheel moulding.
A A
B B

ONE 2V2 | 15
Stroller Assembly
Attaching the Stroller Seat
IMPORTANT NOTES:
• Always remove your child from the stroller
seat before installing, removing or changing
the seat direction.
TIP: The seat is reversible so it can be attached to
the frame in the forward facing position or the rearward
facing position.
AHold the stroller seat
over the frame and align
the seat connectors
with frame sockets.
Push down on the seat
until both stroller seat
connectors have locked
into the frame sockets.
BPull up on both
sides of the seat to
ensure the seat is
locked.
B
A

16 |
Stroller Assembly
IMPORTANT NOTE: The sun is very strong. DO NOT LEAVE YOUR CHILD EXPOSED TO THE SUN.
The canopy or hood on this product will not give your child total protection from the harmful rays of the sun.
Attaching the Canopy
APlace the canopy on
the stroller seat and
push the clips on the
sides of the canopy onto
the stroller seat until
they snap into place.
BAttach the canopy to
the seat unit with the
zipper. There is peek
a boo window with
magnetic closer for
viewing and ventilation.
CTo expand the canopy
unzip the centre section
of the canopy.
DThere is a viewing
window for ventilation
and observation.
A B
DC

ONE 2V2 | 17
Stroller Assembly
Attaching the Arm Bar
WHEN A CHILD IS IN THE STROLLER, KEEP THE ARM BAR ATTACHED AT ALL TIMES.
AInsert the arm bar
mouldings into the
sockets on each side of
the stroller frame and
push down on the arm bar
until a ‘click’.
To assist with putting a
child in the stroller, you
can release the arm bar on
one side. Press the button
on the side of the arm
bar moulding and pull the
arm bar up and out of the
socket. Rotate the arm
bar clear of the stroller.
Reattach the arm bar after
fastening the child in the
harness.
BTo remove the arm
bar, press the button on
each side of the arm bar
moulding and pull arm bar
up and out of the sockets.
A B

18 |
Stroller Assembly
Attaching the Shoulder Harness Pads Attaching the Boot Cover
ASlide the shoulder pads
through the shoulder
harness straps and adjust
to the position which ts
comfortably on the child.
AAFit the boot cover over
the leg rest and close the
snap fastener on both
sides of the boot cover.
A
IMPORTANT NOTE: Ensure that the
shoulder straps are tted through the appropriate
harness slots to suit your child’s seated shoulder
height. (Refer to Page 24)
Sold Separately

ONE 2V2 | 19
Stroller Assembly
Installing the Newborn Comfort Insert
IMPORTANT NOTES:
• Do not use newborn back support
wedge in bassinet mode.
• The newborn back support wedge has
been designed to help improve and
provide a more supportive seating
position for newborn or lower birth
weight babies.
• The stroller seat should be used in the
fully reclined position with the newborn
back support wedge.
• The newborn back support wedge
should be removed as your baby grows.
• While using this product regularly
check to ensure that the harness straps
remain tight.
• Ensure that the shoulder straps are tted
through the appropriate harness slots to
suit your child’s seated shoulder height.
Wedge
ATo use the newborn
back support wedge,
place the newborn back
support wedge rmly in
the seat.
BPlace the insert on the
stroller seat and thread
the waist and shoulder
harness straps through
the buttonholes in the
back of the seat insert.
A
B
Sold Separately

20 |
Stroller Assembly
Installing the Newborn Comfort Insert
DSlide the shoulder pads
through the shoulder
harness straps and adjust
to the position which ts
comfortably on the child.
CTo use the head
pillow, place the head
pillow elastic behind the
shoulder harness strap.
Sold Separately
D
C