Brother LC980 Instruction Manual

5/08/10 3:38 PMI N K S U P P O R T . I N F O
Page 1 of 2file:///Volumes/Macintosh%20HD%20Server/ADVANCED%20CONSUMABLE/JET%20FILES/SUPPORT/Brother%20support.webarchive
Language: Translate:
|Brother | LC980 / LC1100
USING COMPATIBLE LC980 / LC1100 CARTRIDGES
FOR BROTHER
FREQUENTLY ASKED QUESTIONS
Q. My cartridge doesn’t fit the printer the same as the original.
A. Before installing your compatible cartridge, you must remove the red sealing clip by ‘snapping’ it off.
Q. I have installed my compatible cartridge correctly but the printer cannot detect it.
A. Remove the cartridge from the printer, push the reflector on the cartridge up until it clicks into position.
Reinstall the cartridge slowly.
Cartridge removed from printer Push reflector up as shown before
installing cartridge into printer.

5/08/10 3:38 PMI N K S U P P O R T . I N F O
Page 2 of 2file:///Volumes/Macintosh%20HD%20Server/ADVANCED%20CONSUMABLE/JET%20FILES/SUPPORT/Brother%20support.webarchive
Q. I have installed my compatible cartridge correctly but the printer says it cannot print as the cartridge doesn’t
have enough ink to maintain print quality.
A. If you have installed a full cartridge and the replace ink message appears, you should follow
the instructions below:
1. Remove the cartridge from the printer.
2. Push reflector up as shown before installing the cartridge into the printer.
3. Tilt the cartridge forward to allow the front chamber to fill with ink.
4. Reinstall the cartridge in the printer, slowly.
Back to top
BROTHER | CANON | EPSON | HP | COPYRIGHT 2010 INKSUPPORT.INFO