Broyhill GBOI-901 User manual

GENERAL BEST PRACTICES FOR ASSEMBLY:
Read all instructions before starting
Clear a flat covered space to being
We recommend two adults for assembly
Note that hardware required is provided for every step
Pay attention to orientation
Helpful hints provided along the way
Retain these assembly instructions for future reference
WARNINGS:
Use the correct screws as indicated. All screws should be hand tightened only until the piece is completely assembled ( This
will make the assembly process much easier. ) Once the piece is fully assembled, go back and fully tighten all screws with
the tool provided.
Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the product
construction.
Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line or electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to the product. Please read all instructions before assembly and use.
The chairs are not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces only.
This chair has a weight capacity of 250lb (113.6kg). Improper use of this product or failure to use as directed may result in
injury. Not intended for commercial use.
MAINTENANCE:
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other solvents on
the frame or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery cleaner if necessary.
If washed, rinse well and hang to dry. Do not machine wash or dry.
We recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and safety of your product.
In order to prolong the life and beauty of your product, we recommend that it be stored in a dry and protected area during off season periods.

PARTS LIST
Part No. Part Qty Image Part No. Part Qty Image
1Chair Seat 16Seat Cushion 1
2Chair Base Pole 17Screw(M6x15mm) 4
3Chair Base 18Washer 4
4Caster Wheel 59Allen Wrench 1
5
Tilt
Tension
Control
1
PRODUCT MAP
3
8
9
3
1
4
4
2
4
6

STEP 1
PART REQUIRED: 1 & 5
Using the Allen wrentch to tighten all the screws.
STEP 2
PART REQUIRED: 1, 2 & 5
2
7
8
X4
X4
7
8
1
5
2
1
5
9
X1

STEP 3
PART REQUIRED: 3 & 4
STEP 4
PART REQUIRED: 1, 2, 3, 4 & 5
Tighten all the screws.
4
3
1
4
4
4
4
4
4
4
3
4
X4
2

STEP 5
PART REQUIRED: 6
Finished!
SPECIAL WARNING
6

SPECIAL WARNING
Warranty
One-year limited warrantly.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.