BullFrog 0619 KYO User guide

ASSEMBLY AND INSTRUCTION MANUAL
ALTERNATIVE COVER
www.bullfrog-design.com
MODEL 0619 KYO
© 2019 K URT BEI E R &KATI QU I N G E R
Functional back and armrests are
completely foldable
...up to a comfortable relax lounger Due to lateral seat adjustment arises
a useful clipboard
Attention! Optionally different foam qualities in the backs available.
CLASSIC COVER
ALTERNATIVE COVER

0619 KYO
© 2019 K URT BEI E R &KATI QU I N G E R
ATTENTION!
DON`T SIT ON BACK OR ARMREST EXCEPT THEY ARE AT LOWEST POSITION.
Use of back- and armrest function
Adjustment of armrest slant:
1. To adjust the desired position grip the armrest from the outside and pull it carefully into your direction.
3. From zero position you can easily snap the armrest into desired position.
2. To obtain zero position pull the armrest carefully beyond the top position into your direction and fold
down into zero position.
To adjust back, proceed the same way.
Sitting

0619 KYO
© 2019 K URT BEI E R &KATI QU I N G E R
Motorised seat adjustment:
TRANSFORMER
A
Power supply
1. Connect cable A (fixed at seat element) to provided transormer and plug it into socket.
2. Press button B und C at remote control to move seat continuously to the right or to the le.
A
To avoid traces of usage at cover material, seat should (as possible) only be adjusted
when back and armrest are folded up (like fig. above).
At types with manual adjusment possibilities the seat cushion can be mooved back
and forth in the direction of the arrow .
ATTENTION!
TRANSFORMER HAS TO
BE SITUATED OUTSIDE
OF THE SOFA!
C
B
Lying
Relaxing

0619 KYO
© 2019 K URT BEI E R &KATI QU I N G E R
Delivery condition: already synchronised November 2021
B
C
A
Motorised seat adjustment - Programming of transmitter and receiver
Transmitter
Brief instruction, Pairing-Method:
Should a new start-up of remote control be necessary the wireless communication
with the control/motor must be established. Proceed as follows:
The programming is completed, the transmitter is now ready for operation. If the motor doesn´t start while
pressing, release the button and press again. If necessary retry the process.
Put drive systems into operation successively, don`t operate several systems simultaneous.
Otherwise the remote control cannot be assigned clearly by control/motor.
Receiver
LED
1. Press pairing buttons A at receiver 2 x until the
LED indicates. The pairing process is active for
about 10 seconds.
2. Press simultaneous button Band Cat the transmitter
until the green LED at the receiver vanishes. This
confirmes a successful pairing process.
Note: For the pairing prozess the distance between
transmitter and receiver should be less than 2
metres.
The programming is completed, the transmitter is
now ready for operation. If the motor doesn´t start
while pressing, release the button and press again. If
necessary retry the process.

0619 KYO
© 2019 K URT BEI E R &KATI QU I N G E R
FUNKI - how it works:
Keep all documents relating to the purchase of your furniture carefully, even beyond the legal warranty period of 2 years. You will
find all important information in your product folder and also on our website www.bullfrog-design.com
seam
zipper
1. Take the cushion at its upper side
and put the cushion on your knees
with the zipper on the bottom. The
seamless side faces you.
2. Move the upper part of the cushion
towards yourself until the final position
is reached.
3. Now you are able to move the upper
part backwards until the upper part
of the cushion will click into place in the
zero position.
4. Now put the cushion in the preferred
position (e.g. in the back, seamless side
in front and zipper at the bottom).
By pulling the upper part of the chushion
towards yourself, you are now able
to choose among 16 raster positions,
however you like it.