BullFrog 8200 SOLID User guide

ASSEMBLY AND INSTRUCTION MANUAL
www.bullfrog-design.com
29.11.2021
Covered cabinet doors
With filigree wooden frame
Filigree metal frame
MODEL 8200 SOLID.
© 2019 K URT BEI E R &KATI QU I N G E R
High-quality Genuine wood,
old oak

Shelf assembly
Screwing of metal/metal connections:
1. Insert a screw (a) through the hole (b) from the metal strut (here the example of rack 4) and screw it into
the threaded sleeve (c).
2. Push the two shelves flush with each other and screw the shelves together with the 2nd screw by inserting
it through the hole and with the already screwed threaded sleeve (c) from the other side (here rack 3).
Screwing of metal/wood connections:
1. Insert a back wall screw (d) through the hole (b) from the metal strut (here the example of rack 4) and a
through sleeve (e). Push the racks together flush and screw the back wall screw (d) into the wood.
After setting up the furniture, the 4 enclosed felt glides should be glued to the adjustable feet as floor protection.
By turning the 4 feet, the furniture can then be aligned horizontally.
Place the supplied small parts in front of you.
a
a
a
d
d
d
e
e
e
a
a
c
c
b
c
8 Threaded sleeves
16 Screws M4x8
(Using the example: rack 3 und 4)
(Rack 4)
Metal/metal compounds
Adjustable feet (already fitted) Felt gliders (for self-assembly)
Metal/wood compounds
(Rack 3)
4 Back wall screws
4 Through-hole sleeves
(without thread)
+
+
b
Adjustable feet
8200 SOLID.
© 2019 K URT BEI E R &KATI QU I N G E R

Transport protection for shelves at High Board HB1 and Sideboard SB1:
1. Set up the furniture and align it using the adjustable
feet (see page 6, adjustable feet).
2. Pull the transport protection (A) out of the
side panel.
A
A
8200 SOLID.
© 2019 K URT BEI E R &KATI QU I N G E R