BullFrog 6027 LOFT User guide

ASSEMBLY AND INSTRUCTION MANUAL
www.bullfrog-design.com
MODEL 6027 LOFT
© 2019 K URT BEI E R &KATI QU I N G E R
TIMELESS CUBIC DESIGN FABRIC: DECORATIVE
OVERCAST SEAM
(LEATHER: RAW EDGED)
VARIABEL INSERT DEPTH
FOR SLATTED FRAME

Assembly manual - Model 6027
6027 LOFT
© 2019 K URT BEI E R &KATI QU I N G E R
ca. 12,5
ca. 22 cm
1. Unpack the individual parts of the bed,
place them as shown in picture and check the
delivered package contents for completeness.
2. Screw in one wooden
foot per corner connector.
3. Screw together the side panels with headboard and then the foot part
with side panels. Subsequently mount the centre support rail at desired
height at headboard and foot part. Turn the height-adjustable supporting
foot at the inside to adjust the individual desired height. If you like to insert
the mattress deeper, just hang the slatted frame angle at lower position
and adjust the height of supporting foot again. The insert depth varies
around 7 cm.
ATTENTION! To ensure secure assembly, please observe the individual steps of instruction!
The furniture should always be mounted in pairs (2 persons)!
Information
Contents
2 side panels (semi-product) with 4 already mounted corner connectors
1 foot part (semi-product)
1 headboard (completely upholstered)
20 hexagon socket countersunk screws
1 centre support rail with angle connectors
4 slatted frame angles for corner connectors
2 slatted frame angles for side panels
9 felt gliders
1 Allen key, size: 4 mm
Wooden feet 7 cm:
3 height-adjustable plastic supporting feet (44-73 mm, 89-125 mm, 120-235 mm)
4 plastic glides 70 mm
4 Screw-in wooden feet
Wooden feet 13 cm:
3 height-adjustable plastic supporting feet (120-235 mm)
4 Screw-in wooden feet

13 cm wooden feet
6027 LOFT
© 2019 K URT BEI E R &KATI QU I N G E R
ATTENTION: The mounting of angles for a slattet frame height is not equal for every angle. The single
angles are positioned at another height than the angles of the centre support rail. The supporting foot
height must be adjusted individually by turning.
120mm
-
235mm
120mm
-
235mm
120mm
-
235mm
120mm
-
235mm
120mm
-
235mm
120mm
-
235mm
Centre support rail
Support angle
Insert depth approx. 17 cm
Centre support rail
Support angle
Insert depth approx. 19,5 cm
Centre support rail
Support angle
Insert depth approx. 22 cm
Centre support rail
Support angle
Insert depth approx. 17,5 cm
Centre support rail
Support angle
Insert depth approx. 15 cm
Centre support rail
Support angle
Insert depth approx. 12,5 cm
Slatted frame assembly
with wooden foot 13 cm
Single angle
(revolved)
Single angle
(revolved)
Centre
support rail
Supporting
foot

7 cm wooden feet
ATTENTION: The mounting of angles for a slattet frame height is not equal for every angle. The single
angles are positioned at another height than the angles of the centre support rail. The supporting foot
height must be adjusted individually by turning.
6027 LOFT
© 2019 K URT BEI E R &KATI QU I N G E R
120mm
-
235mm
120mm
-
235mm
44mm
-
73mm
89mm
-
125mm
89mm
-
125mm
89mm
-
125mm
Centre support rail
Support angle
Centre support rail
Support angle
Insert depth approx. 17 cm
Centre support rail
Support angle
Insert depth approx. 19,5 cm
Centre support rail
Support angle
Insert depth approx. 22 cm
Centre support rail
Support angle
Insert depth approx. 17,5 cm
Insert depth approx. 15 cm
Centre support rail
Support angle
Insert depth approx. 12,5 cm
Slatted frame assembly
with wooden foot 7 cm
Single angle
Single angle
Centre
support rail
Supporting
foot

6027 LOFT
© 2019 K URT BEI E R &KATI QU I N G E R
1.Place the cover for corpus around the Bed. Look for the 2 corner parts with
the connector seam. Start at one corner to place the seam of cover on a
mitre.
2. When the complete cover is placed correctly, remove the so
protective strip from velcro. To fix the cover, press the cover at corpus,
starting form the corners and the inside of bed. Latterly fix the cover at
lower edge. The velcro adheres at material of corpus.
Covered corpus!
Instruction for covering of the corpus
Keep all documents relating to the purchase of your furniture carefully, even beyond the legal warranty period of 2 years. You will
find all important information in your product folder and also on our website www.bullfrog-design.com