BullFrog BALOU OD2308 User guide

Functional backrest,
manually adjustable
Stool, usable as sofa element Super so sitting comfort
ASSEMBLY AND INSTRUCTION MANUAL
www.bullfrog-design.com
MODEL OD2308 BALOU
© 2023 K URT BEI E R &KATI QU I N G E R

OD2308 BALOU
© 2023 K URT BEI E R &KATI QU I N G E R
1. To adjust the desired position grip the back/armrest from the outside and pull it carefully into
your direction.
Adjustment of back/armrest:
Use of back/armrest function:
2. To obtain zero position pull the back/armrest carefully beyond the top position into your direction (a)
and fold down into zero position (b).
3. From the zero position, you can gradually adjust the back/armrest to the desired position.
a
b

Assembly/Transport protection:
OD2308 BALOU
© 2023 K URT BEI E R &KATI QU I N G E R
Assembly of back/armrest:
Groove hinge at
back/armrest
Bolt hinge at
seat cushion
Groove Bolt
Place the backrest/armrest with the groove of the backrest hinges on the bolts of the seat hinges...
...and push the backrest/armrest inwards until the
hinges click into place.
Insert the seat cushion.
1. Position the packing unit at the place where supposed to be placed and open the packaging.
To avoid damaging the furniture/fabric, leave
the leather strips on the hinges until assambly
of back/armrest.
Remove the leather strips
from the hinges.
ATTENTION! To ensure secure assembly, please observe the individual steps of instruction! The furniture should
be mounted in pairs (2 persons)!

Disassembly, back/armrest:
OD2308 BALOU
© 2023 K URT BEI E R &KATI QU I N G E R
1. Reach over the back/armrest from behind and take the 2 pull loops of the back/armrest section.
2. Pull the loops until the hinges disengage with an
audible click.
3. Tilt the back slightly outwards and li it out of the
hinges.

OD2308 BALOU
© 2023 K URT BEI E R &KATI QU I N G E R
Connecting of elements:
Front side
Back side
Le side
Right side
Figure: 2 x elements 70T with stool 550
Example with 1 element + 1 stool:
2. Li up the element slightly, slide the plastic connectors (2) onto the plastic glides (1) from below and push
them firmly upwards.
2
2
22
1. Place the enclosed components in front of you!
Plastic connectors
1
1
2
2
2
2
1
1
2
2
1
1
21
2

OD2308 BALOU
© 2023 K URT BEI E R &KATI QU I N G E R
Keep all documents relating to the purchase of your furniture carefully, even beyond the legal warranty period of 2 years. You will
find all important information in your product folder and also on our website www.bullfrog-design.de
1
1
2
2
1
2
2
21
3. Place the stool in front of the plastic connectors and li it from above into the circular opening of the plastic
connectors.
4. Press them upwards.
2
2
1
1
1
2
2
2
2
1
1
2
2
1
1
2
1
2
1
1
2
2
1
1
1
Repeat the process for all other connections.