Canon PaperCraft Gift Box E User manual

Assemble the sides of the box
Assembly procedureAssembly procedureAssembly procedure Cut line
Mountain fold Valley fold Slot
Part 2
Part 1
Part 3
Fold along all the dotted lines on parts 1 to 3 .
Glue parts 2 and 3 to part 1 .
Yukiko TanikoshiCanon Inc.Canon is a registered trademark of Canon Inc.
Gift box E (Pink) : Assembly Instructions
http://www.canon.com/c-park/en/http://www.canon.com/c-park/en/
Glue, scissors and other tools may be dangerous to
young children so be sure to keep them out of the reach
of young children.
scissors, paste, a used ballpoint pen (tracing along the fold lines makes
them easier to fold)
Caution
You will needYou will needYou will need
Explanation of SymbolsExplanation of SymbolsExplanation of Symbols
Numbered glue tabs
Glue the parts together in the order indicated by the numbers.
Cut a slot.
Cut a slot.

Glue together the base of the sides of the box from to part 4 . Fold after gluing the parts together.
Insert both sides of the box into the slots.
Insert slot
Yukiko TanikoshiCanon Inc.Canon is a registered trademark of Canon Inc.
Gift box E (Pink) : Assembly Instructions
2
Assemble the box
Assembly procedureAssembly procedureAssembly procedure
Part 4
Cut a slot.
Cut a slot.

Fold the part with slits on the front and rear surface of the box and insert.
Once it is inserted properly, open up the folded part.
Pull it into shape and the box is completed.
Open up
Open up
Assemble the box
Yukiko TanikoshiCanon Inc.Canon is a registered trademark of Canon Inc.
Gift box E (Pink) : Assembly Instructions
Assembly procedureAssembly procedureAssembly procedure
Completed
3